Dolphin Solutions Ltd Approvals


#1910069

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless steel body). Flow is controlled by a solenoid valve that is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Models with two inlets are supplied with hoses that incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models with single inlets incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1910069
Expiry date:
31/10/2024
Note:
R010 only applies to models DB186x-y, DB181x-y, DB180x-y, DB181-316 & DB186-316
Size:
Models with one inlet: 10mm spigot connection. Models with two inlets: stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” BSP captive nut.
Marking:
DOLPHIN LOGO ON tap body
Installation Requirements:
R001 R006 R009 R010
Model:
Models with one inlet: DOLPHIN BLUE DB180x-y, DOLPHIN BLUE DB185x-y, DOLPHIN BLUE DB180-316 & DOLPHIN BLUE DB185-316. Models with two inlets: DOLPHIN BLUE DB181x-y, DOLPHIN BLUE DB186x-y, dolphin blue DB181-316 & DOLPHIN BLUE DB186-316.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2009321

Range of deck mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlet incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009321
Expiry date:
30/09/2025
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (D with a dolphin) on Body
Installation Requirements:
R001 R006
Model:
DSaaa.bbb.ccc.d.ee Where ‘aaa’ denotes the style type, the following options are available: DS211 - 90° bent spout DS213 - 55° bent spout Where ‘bbb’ denotes the vertical height of the spout in mm. Range 125mm - 225mm in 25mm increments. Where ‘ccc’ denotes the horizontal length (projection) of the spout in mm. Range 125mm – 225mm in 25mm increments. Where ‘d’ denotes the material finish, the following options are available: 1 - brushed satin, 2 - mirror polished, 3 - PVD satin, 4 - PVD mirror polished or 5 - powder coated. Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2009320

Range of wall mounted, electronically operated combination tap assemblies (various finishes, see model ) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlets incorporate a aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009320
Expiry date:
30/09/2025
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (D with a dolphin) on body
Installation Requirements:
R001 R040
Model:
DSaaa.bbb.c.dd Where ‘aaa’ denotes the style type, the following options are available: DS111 - 90° bent spout, DS112 - 90° bent spout with wall plate fixing kit, DS113 - 55° bent spout or DS114 - 55° bent spout with wall plate fixing kit. Where ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm. Range 100mm - 275mm in 25mm increments. Where ‘c’ denotes the material finish, the following options are available: .1 – brushed/satin, .2 - mirror polished, .3 - PVD on brushed/satin, .4 - PVD on mirror polished or .5 – powder coated (PC). Where ‘dd’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2106334

Dolphin Blue Flexi hose range of wall outlets and brackets incorporating stainless steel bodies (various finishes) and EPDM ‘O’-rings. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2106334
Expiry date:
30/06/2026
Size:
½” BSP (M)
Marking:
Dolphin logo (D) on body.
Installation Requirements:
R001 R040
Model:
DB3071.x(.xx) The suffix .x in the above codes – DB3071.x(.xx) - will be a number 1 - .5 to denote the finish: 1 to denote brushed/satin polished, 2 to denote mirror polished, 3 to denote brushed/satin polished with PVD coating, 4 to denote mirror polished with PVD coating 5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. The suffix (.xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix .3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3071.3.50 is brushed/satin polished with Gold PVD coating.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2106335

Dolphin Blue range of handheld shower outlets with a stainless bodies (various finishes) and EPDM ‘O’-rings. The inlet incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2106335
Expiry date:
30/06/2026
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Dolphin logo (D) on body.
Installation Requirements:
R001 R040
Model:
DB3020.x(.xx) The suffix x in the above codes – DB3020.x(.xx) - will be a number 1 - 5 to denote the finish: 1 to denote brushed/satin polished, 2 to denote mirror polished, 3 to denote brushed/satin polished with PVD coating, 4 to denote mirror polished with PVD coating 5 to denote powder coated. 6 - 9 to denote other material and finish options that may be available in the future. The suffix (xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix 3 to 5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3020.3.50 is brushed/satin polished with Gold PVD coating.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2201325

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass or stainless steel bodies). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2201325
Expiry date:
31/01/2027
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (a Dolphin) on body.
Installation Requirements:
R001 R040
Model:
DS120 Series InForm SMART taps DSaaa.bbb.c.dd Where ‘aaa’ denotes the mounting type and can be replaced with: DS121 - thru panel mounted DS122 - wall plate mounted Where ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm: Range 100mm - 275mm in 25mm increments Where ‘c’ denotes the material finish and can be replace with: 1 - brushed/satin 2 - mirror polished 3 - PVD on brushed/satin 4 - PVD on mirror polished 5 - powder coated (PC) Where ‘dd’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2203315

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies with stainless steel bodies (in various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The solenoid housing attaches to the main tap body via (black) LLDPE tubing. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203315
Expiry date:
31/03/2027
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R006 R008 R010 R557 R570
Model:
DSaaa.bbb.ccc.d.ee – DS220 Series InForm SMART taps. Where ‘aaa’ denotes the mounting type, the following options are available: DS221 – straight spout DS223 – bent spout Where ‘bbb’ denotes the projection of the spout from body to spout outlet in mm. Range 95mm - 195mm in 25mm increments. Where ‘ccc’ denotes the height of the tap from the underside of the rosette to the top of the body in mm. Range 170mm – 370mm including 170mm, 260mm, 310mm & 370mm. Where ‘d’ denotes the material finish, the following options are available: .1 – brushed/satin, .2 - mirror polished, .3 - PVD on brushed/satin, .4 - PVD on mirror polished or .5 – powder coated (PC). Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Expiry date:
30/11/2026
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2112363

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112363
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Dolphin logo on adhesive label below insert within cistern: 6L waterline on casing within cistern Dolphin logo on flush plate
Installation Requirements:
R001 R556 R571
Model:
DB552x.M, DB552x.M, DB552x.M, DB552x.M.1130, DB552x.P.1130 & DB552x.C.1130 concealed WC flushing cisterns ‘x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2206354

Range of wall mounted mirrored units incorporating an electronically controlled combination tap assemblies. Flow is controlled via solenoid valve which is actuated by an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206354
Expiry date:
30/06/2027
Note:
R008 applies to the solenoid valve and its housing. This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
Size:
½” BSP (M).
Marking:
Dolphin Solutions Ltd. logo (letter D with integral dolphin silhouette) on underside of mounting bracket. Products with the Alavo behind mirror baseplate mounting option are marked Dolphinsolutions.co.uk on the underside of the base plate.
Installation Requirements:
R001 R007 R008 R040 R570
Model:
DS191.xx - Dolphin Alavo behind mirror inform (SMART) tap. Where xx denotes the size and shape of the mounting bracket and can be any combination of letters and/or numbers.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.