Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103354

Size:

DN8 (denoted by 08) bore diameter available with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter available with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter available with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring

Marking:

GENEBRE, date of manufacture (MMYY) GENEBRE label on the product.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

GEFLEX A*B XX D E XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire N = Nylon wire. E denotes the liner material and is replaced with 0 for EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number.

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

'3959 sellador de roscas alta resistencia'. Green coloured anaerobic adhesive. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions

Section:

5520 Sealants - Screwed Joints

Section Subtitle:

Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions

WRAS Approval Number:

250755013

Expiry date:

31/07/2030

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

Range of hand wheel operated gate valves with blue epoxy coated ductile iron bodies, ductile iron wedge encapsulated in EPDM. Maximum working pressure 16.0 Bar Maximum operating temperature 65.0°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

240902090

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700 & DN800 Flanged

Marking:

GENEBRE logo, DN & PN16 on body. GENEBRE logo type & product info on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

2102

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

2014 Range of stainless steel inline spherical valves incorporating a stainless-steel ball, PTFE gasket and seat with a lever type operating member. Maximum operating pressure 62 bar. Maximum operating temperature 23°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

251104017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” to 3” BSP (F).

Marking:

GENEBRE logo, DN, PN & product info on body. GENEBRE on lever.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

2014 Range - Full port ball valves.

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

2101 Range of butterfly valves with blue epoxy coated ductile iron bodies, stainless-steel discs and PTFE seats. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

251012023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Genebre, DN, PN and material cast on body. 'G' logo on name plate & other technical information.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

2101 : Wafer type Stainless steel discs with PTFE seats, 10bar DN50-DN125 2101: Wafer type Stainless steel discs with PTFE seats, 10bar DN150 and DN200

Product Images

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company