Noken Design S.A.U Approvals


#1907370

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a dome type operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1907370
Expiry date:
31/07/2024
Note:
The 100190229 – N109390074 concealed part is not approved in its own right.
Size:
½” BSP (F)
Marking:
Porcelanosa on spout face plate.
Installation Requirements:
R001 R010 R040
Model:
100190229 – N109390074 concealed part for use with external trim parts: 100184778 – N109390069 (square spout) & 100190226 – N109390072 (round spout).
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#1910012

Range of single hole, single outlet (fixed) combination tap assemblies (black or chromium plated brass) incorporating a ceramic cartridge headwork with, single lever operating member. The spout outlet incorporates a plastic aerator. The 100208340 & 100208350 models are supplied with a lever type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910012
Expiry date:
31/10/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided, PEX lined flexible hose assemblies with ⅜” captive nut end connections and EPDM rubber washers.
Marking:
NK Porcelanosa on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
100208340,100208350,100208352,100208353,100208354, 100208355,100208362 & 100208373.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#1910039

Range of single hole single outlet floor mounted bath taps with chromium plated brass bodies incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a combined plastic aerator and plastic flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910039
Expiry date:
31/10/2024
Size:
12.7mm Spigot.
Marking:
NK Porcelanosa on operating member.
Installation Requirements:
R001 R010 R040
Model:
100208363 (Black) 100208374 (Chrome)
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2004361

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated or matt black brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0503 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
WRAS Approval Number:
2004361
Expiry date:
30/04/2025
Note:
This approval does not include a shower hose and handset.
Size:
¾” BSP (M)
Marking:
WRAS & nk Porcelanosa on body.
Installation Requirements:
R001 R006 R030
Model:
100284623, 100284640, 100259573 & 100284598 COMBINATION TAP ASSEMBLIES
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2010300

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Model 1002137653_N199998998 is supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010300
Expiry date:
31/10/2025
Note:
No testing performed on the pop-up waste.
Size:
Stainless steel braided EPDM lined hose assemblies with 3/8” captive nut end connections.
Marking:
NK Porcelanosa on operating member
Installation Requirements:
R001 R006 R010
Model:
100237653_N199998998 100237663_N199999000
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2010304

Range of single hole, single outlet (fixed) combination tap assemblies (in black or chrome finishes) with brass bodies. Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010304
Expiry date:
31/10/2025
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
NK Porcelanosa onoperating member.
Installation Requirements:
R001 R006 R009 R010
Model:
100263947 N199998927. 100263999 N199998926. 100264005 N199998925. 100264006 N199998924. 100263976 N199998923. 100264003 N199998922.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2012355

Wall mounted thermostatic shower mixer incorporating a chromium plated brass body and ceramic disc headwork with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which has a manual override button. The inlets incorporate a single check valve cartridge (however the complete assembly has not been tested to demonstrate they provide adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2012355
Expiry date:
31/12/2025
Note:
Shower hose and handset is not provided as part of this approval.
Size:
¾” BSP (F)
Marking:
NK Porcelanosa on body
Installation Requirements:
R001 R010 R040
Model:
100095514-N199999700 Smart
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2104326

Range of shower arms and brackets with brass bodies (various finishes). Shower brackets incorporate single check valves cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2104326
Expiry date:
30/04/2026
Note:
Open outlet use only.
Size:
½” BSP(M)
Marking:
NK Porcelanosa on backing plate.
Installation Requirements:
R001 R040
Model:
Wall brackets: 100213266 N629321403 100039121 N198490001 100064216 N199999973 100038631 N158490001 Shower arms: 100063878 N192579908 100146670 N192579950 100090331 N192579919 100090332 N192579918 100213248 N807993290 100039088 N192452301
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2104325

Range of overhead shower outlets incorporating brass bodies (chrome plated) and EPDM gaskets. Inlets have stainless filters incorporated within a ball joint. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2104325
Expiry date:
30/04/2026
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
NK Porcelanosa on body.
Installation Requirements:
R001 R040
Model:
INOX Mirror range: 100251806-N200000046 100266472-N186490043 100266413-N186490041 100266447-N186490040 100266453-N185709923 100266462-N185709922 Models added July 2023: 100323258-N186490401 100323239-N186490402 100323238-N200000457 100323259-N200000455
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2109324

Range of shower outlets and shower handsets. The shower heads have a brass body and ball joint, NBR ‘O’-ring, stainless-steel strainer and silicon nozzles. The shower handset has a brass body, NBR ‘O’-rings, silicon nozzles and incorporate a plastic flow regulator on the inlet. Model ‘100274774 N200000068’ is supplied with a double interlocked hose and a single check valve cartridge (to be installed on the inlet to the hose) however the complete product has not been fully tested to demonstrate it provides backflow protection. Model ‘100274774 N200000068’ has a maximum operating temperature of 60°C. All other models have a maximum operating temperature of 85°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2109324
Expiry date:
30/09/2026
Size:
½” BSP (F) or ½” BSP (M)
Marking:
NK Porcelanosa on body.
Installation Requirements:
R001 R040
Model:
Shower outlets: 100213249 N192579955. 100090355 N192579923. 100090329 N192579916. Shower handsets: 100213256 N629321404. 100040325 N299274701. 100274774 N200000068.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2112321

Range of single hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes), ceramic cartridge headworks with single lever operating members. The spout outlets incorporates a plastic aerator. Models 100121306, 100121305 & 100123629 are supplied with lever operated pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2112321
Expiry date:
31/12/2026
Note:
R009 does not apply to 100123629 N172390025 Acro N Single Lever Basin Mixer Chrome No testing has been performed on the pop-up wastes.
Size:
Stainless steel braided EPDM or PEX lined hose assembly incorporating 3/8” BSP (F) captive nut end connections
Marking:
NK Procelanosa on body
Installation Requirements:
R001 R006 R009 R010
Model:
100121306 N199999612 Urban Basin Mixer. Black 100121305 N199999610 Urban Basin Mixer Chrome 100130995 N199999531 Nk Concept Single Lever Basin Mixer 100126423 N194710554 Hotels Single Lever Basin Mixer Chr 100126422 N194710553 Hotels H/S Single Lever Basin Mixer Chr 100123629 N172390025 Acro N Single Lever Basin Mixer Chrome
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2109063

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109063
Expiry date:
30/09/2026
Size:
15mm Compression
Marking:
Noken Porcelanosa, model and flushing volumes inside of cistern. Noken on operating buttons.
Installation Requirements:
R001 R556
Model:
100294206 & 100294199 WC CISTERN
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2106050

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106050
Expiry date:
30/06/2026
Size:
1/2” BSP (M).
Marking:
NOKEN & SMARTLINE ON FRONT OF CISTERN NOKEN, MODEL & FLUSH VOLUME ON INSIDE OF CISTERN
Installation Requirements:
R001 R556
Model:
100294223 3-4.5 Ltr. 100294207 3-4.5 Ltr. 100294230 3-6Ltr. 100294216 3-6Ltr.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2209069

Range of combined bath filler and overflow waste assemblies incorporating a cable operated pop-up waste. The outlet incorporates a plastic flow straightener. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2209069
Expiry date:
30/09/2027
Note:
No testing performed on pop-up waste. Open outlet use only.
Size:
Stainless steel braided EPDM lined flexible hose assembly with ½” captive nut end connection.
Marking:
NK Porcelanosa on overflow cover.
Installation Requirements:
R001 R576
Model:
250023892-N790001469 length 55 cm – Chrome finishing
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#240404018

Range of concealed, wall mounted thermostatic blending valves with brass bodies (chromium plated trim set). The product incorporates a ¼ turn ceramic disc or a 2 way manual diverter with shut-off position to control the flow, with dome type operating members.The temperature is controlled independently via thermostatic cartridges, with dome type operating members. The inlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure: 5 Bar. Maximum operating temperature: 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
240404018
Expiry date:
30/04/2029
Note:
These products are not supplied with shower hoses or handsets.
Size:
½” BSP (F).
Marking:
NK, Procelanosa etched on back plate
Installation Requirements:
R001 R010 R040
Model:
100293470-N138060058 - MARNE CONCEALED THERMOSTATIC VALVE 2 WAYS. 100293437-N138060059 - MARNE CONCEALED THERMOSTATIC VALVE 1 WAY.
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#2109071

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109071
Expiry date:
30/09/2026
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Smart Line nk Porcelanosa Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Model:
100294198 100294217
Factor:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


#240404029

Range of shower outlets with plastic bodies (various finishes). Model 100184782 has flow regulator at the inlet and a shower arm. Maximum working pressure: open outlet. Maximum operating temperature: 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
240404029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
30/04/2029
Size:
½” BSP (M).
Marking:
Backplate etched with Porcelanosa and bottom of handsets etched with NK Porcelanosa.
Installation Requirements:
R001 R040
Model:
100184782 - TONO SHOWERHEAD 400MM CHROME, 100038634 - COTA HANDSHOWER CHROME, 100213273 COTA HANDSHOWER CHROME BLACK.
Manufacturer:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal Puebla de Arenoso CV 20 KM 2

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.