Methven UK Limited Approvals


#2012803

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a non-rising spindle headwork with cross top operating members and a manual diverter to shower outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2012803
Expiry date:
31/12/2025
Size:
¾” Male BSP Inlets
Marking:
DTC34 (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Model:
TUD03 (chrome plated) TUD03/501 (Gold finish)
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2009317

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (gold plated brass) incorporating a non-rising spindle headwork with cross top operating members and a manual diverter to shower outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2009317
Expiry date:
30/09/2025
Size:
¾” Male BSP Inlets
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Model:
CR23 (chrome plated) CR23/501 (gold finish)
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011303

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks and single lever operating members, with a pull out spray retained within a holster. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011303
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Model:
ABN104 Abingdon. Model added September 2023 BRG104
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011304

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). incorporating a ceramic cartridge and single lever operating member with a spring loaded, pull down trigger operated spray. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011304
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body.
Installation Requirements:
R001 R090
Model:
SPR104 – Spring. Model added September 2021: SLINKY218
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2010333

Range two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever or cross top (model MOT108) operating members. The spout outlets incorporates a plastic flow straightener. The products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed.
WRAS Approval Number:
2010333
Expiry date:
31/10/2025
Size:
¾” BSP (M).
Marking:
DTC34 (brand of Methven) on rear of body. Deva on front leg.
Installation Requirements:
R001 R006 R010
Model:
Insignia range: INS108 EXG5071 STL108 WYE108 MOT108
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011305

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Models SM056, SM056F, SM056/501, SM056/NI & SM056/BZ incorporate ceramic cartridge headworks with single lever operating members. Models SM057 & SM057/501 incorporate non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011305
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections or 15mm copper tails.
Marking:
DTC34 (brand of Methven) on rear of body (models SM057 & SM057/501) DTC34 (brand of Methven) on rear of body and Deva on front of body (all other models).
Installation Requirements:
R001 R006 R010
Model:
Georgian flexi tails: SM056F Georgian 15mm copper tails: SM056 SM056/501 SM056/NI SM056/BZ Venetian 15mm copper tails: SM057 SM057/501
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2012331

Two-hole, singe outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a quarter turn ceramic disc headworks with single lever type operating members. The outlet incorporates a plastic flow straightener. Product is also supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed.
WRAS Approval Number:
2012331
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
DTC15 (brand of Methven) on rear of body. Methven on operating members.
Installation Requirements:
R001 R006 R010
Model:
KEBFCPUK – KEA bath filler.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2012910

Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ceramic disc headworks controlling the flow. Temperature is controlled via a thermostatic cartridge with single lever type operating members which incorporate manual override buttons. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2012910
Expiry date:
31/12/2025
Size:
15mm compression
Marking:
Methven on top of body. DTC37 (brand of Methven) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
KHCTSEFCP KLFCTSEFCP KLFCTS KRLFCTSEFLP KRCTSEFCP
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2010075

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet of models SAV2113/SHD113/SEV113 incorporates plastic aerators. SPA2113 and SPA2313 incorporate a stainless steel mesh at the spout. SAVV2113, SHD113, SEV113, SPA2113, SWO2113 are supplied with a pop-up waste. Maximum working Pressure 10.0 bar. Maximum operating temperature 65ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010075
Expiry date:
31/10/2025
Note:
R160 applies to the waterfall outlets only.
Size:
Stainless Steel braided, PEX lined hose assembly incorporating ½” BSP captive nut end compression end connections.
Marking:
DEVA on operating member. DTC53 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010 R160
Model:
SAVV2113. SHD113. SEV113. SPA2113. SPA2313. SWO2113. SWO2113/EX. SWO2313. Model added May 2023: T-SAVV2313 Model added September 2023: MCA113 Model added October 2023: MCA313
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2012923

Wall mounted thermostatic mixing valves (chromium plated brass), flow is controlled via a quarter turn ceramic disc headwork with dome type operating members. The temperature is controlled by a thermostatic cartridge with dome type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2012923
Expiry date:
31/12/2025
Size:
¾” to ½” off-set unions.
Marking:
Deva on top of body. DTC37 (brand of Methven) on bottom of body.
Installation Requirements:
R001 R010 R040
Model:
VISBS – Vista bar shower with single mode kit.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 10 of 27

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.