Methven UK Limited Approvals


#2207317

Range of single hole, single outlet (swivel) combination tap assemblies (with various finishes). Incorporating a ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2207317
Expiry date:
31/07/2027
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” BSP (F) captive nut end connections.
Marking:
Deva, DTC53 on body.
Installation Requirements:
R001 R006 R010
Model:
CALDEW SINK MIXERS CDW104CP, CDW104BN, CDW104CO, CDW104BK. ASHWORTH SINK MIXERS ASH104, ASH104BC, ASH104BK, ASH104BB, ASH104CO.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2207324

Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2207324
Expiry date:
31/07/2027
Note:
Does not include hose and handset.
Size:
3/4" BSP (F) or 15MM Compression
Marking:
DTC64 on rear of body. Model CTBV02BK DTC64 on rear of body & Methven on front of body.
Installation Requirements:
R001 R010 R040
Model:
X-MCTBV, 269922BV, CTBV02, CTBV02BK, CTBV03.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2303800

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate plastic flow straighteners. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303800
Expiry date:
31/03/2028
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” BSP (F) captive nut end connections. Model TAUR130: 15mm copper tails.
Marking:
Deva on front of body. DTC34 on rear of body.
Installation Requirements:
R001 R006 R010
Model:
MET172, MET172/BC, TAUR130.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2207322

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating a ceramic cartridge headwork with single lever operating member and pull out spray handset. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2207322
Expiry date:
31/07/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP (F) captive nut end connections.
Marking:
Deva on front of body. DTC25 on rear of body.
Installation Requirements:
R001 R090
Model:
PEN104 – Pendle pull out kitchen mixer
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2305800

Wall mounted bib taps (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1750 Taps
Section Subtitle:
Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
WRAS Approval Number:
2305800
Expiry date:
31/05/2028
Size:
½” BSP (M)
Marking:
DTC34 on rear of body
Installation Requirements:
R001 R040
Model:
DLT095, DLV095 & SF2301CP
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2210307

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator and the products are supplied with a click waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210307
Expiry date:
31/10/2027
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
DTC32 on rear of body and DEVA on operating member.
Installation Requirements:
R001 R006 R010
Model:
HEN113 Henley & KGS113 Kingston.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2210357

Plastic shower handset with flexible shower hose and brass wall outlet. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2210357
Expiry date:
31/10/2027
Note:
Open outlet use only
Size:
½” BSP (F)
Marking:
Methven on shower handset
Installation Requirements:
R001 R040
Model:
KHSBK Krome Hand shower in Black
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2210902

Range of chrome plated shower kits. Consisting of shower handsets, shower hoses that incorporate EPDM O-rings and riser rails. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2210902
Expiry date:
31/10/2027
Size:
1/2" BSP (F) Conical nuts.
Marking:
Deva on handsets
Installation Requirements:
R001 R040
Model:
KITS12 KITS13 KITM07
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2211815

Wall mounted, bar type, thermostatic shower mixer (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork with a cube type operating member controlling the flow between each shower outlet. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The product is supplied with a shower hose (PVC), shower handset (chrome plated), riser rail and overhead shower (chrome plated). The overhead shower and the shower handset both incorporate a plastic flow regulator and a combined EPDM washer and stainless steel strainer on the inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2211815
Expiry date:
30/11/2027
Size:
15mm compression.
Marking:
All models: DTC 15 (brand of Methven) on body. DTC15 (brand of Methven) & DEVA on overhead shower. DEVA on shower handset. SCTSDEF model also marked: DEVA on body. WCTSDEF model also marked: Methven on body. Model :SJWDS01CP Marking : Deva on body and DTC 15 on back of body . DTC 15 and WRAS year on shower hose. Methven on handset. Model: SJWDS01BK Marking : DTC 15 On back of valve body Methven on top of valve . DTC 15 and WRAS year on Shower hose . DTC 15 on shower head Methven on handset. Models: SJWDS01CP & SJWS01BK DTC 15 on rear of body, Methven on front of body.
Installation Requirements:
R001 R010 R040
Model:
SCTSDEF WCTSDEF Models added November 2022: SJWDS01CP SJWDS01BK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2206374

Range of pillar taps (chromium plated brass) with a non-rising spindle headwork with dome type or cross top (see model) operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2206374
Expiry date:
30/06/2027
Size:
½" BSP (M)
Marking:
DTC 34 ON TAP BODY
Installation Requirements:
R001 R006
Model:
DCM103, DCM SPEC103, 208.0574.185, MILAN 103, MILAN SPEC103, 183X & 208.0574.189
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2210349

Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210349
Expiry date:
31/10/2027
Size:
½” BSP (M)
Marking:
GBM305 model: Deva and DTC32A (brand of Methven on body), LTK305 and NLD305 models: DTC53 (brand of Methven on body).
Installation Requirements:
R001 R006 R010
Model:
GBM305 - Georgian Bridge Sink Mixer, LTK305 - Lostock Sink Mixer, NLD305 - Newland Sink Mixer. Model added September 2023: GEN305
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2005056

Range of shower handsets with chromium plated ABS bodies with multi-spray patterns. Maximum operating temperature 60 °C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2005056
Expiry date:
31/05/2025
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
DEVA on base of handle
Installation Requirements:
R001 R040
Model:
X-HSET-GTSDEF & X-HSET-GTSDEFBK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2203377

Range of wall mounted thermostatic blending valves with brass bodies (chrome plated), incorporating two way diverter valves controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2203377
Expiry date:
31/03/2027
Size:
½” BSP (M) x ¾” BSP (M) offset unions
Marking:
Deva & DTC 59 on tap body
Installation Requirements:
R001 R010 R040
Model:
X-GTSDEF, X-GTSDEFBK & X-RTSDEF
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2207381

Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2207381
Expiry date:
31/07/2027
Note:
Does not include hose and handset.
Size:
3/4" BSP (F) or 15MM Compression
Marking:
DCT64 on body
Installation Requirements:
R001 R010 R040
Model:
ZD50010045
Factor:
Roca Ltd
Company Name
Roca Ltd
Address
lnterlink 145 lnterlink Way West Bardon Leicestershlre
Postcode
LE671LD

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2211334

Range of shower handsets incorporating flow regulators on the inlets available in chrome and matte black finishes. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2211334
Expiry date:
30/11/2027
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Methven on body
Installation Requirements:
R001 R040
Model:
AJAHS01CP AJAHS01BK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2211339

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2211339
Expiry date:
30/11/2027
Size:
¾” BSP (M)
Marking:
DTC32 on the rear and Deva on the body
Installation Requirements:
R001 R006 R010
Model:
KGS108 HEN108
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906167

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass bodies), incorporating ceramic cartridge headworks that control both flow and temperature with single lever operating member. The spout outlets incorporate plastic aerators and the products are supplied with a click type pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906167
Expiry date:
30/06/2024
Note:
No testing performed on click type waste
Size:
Stainless Steel braided, EPDM lined hose assembly incorporating ½” BSP captive nut end compression end connections.
Marking:
DEVA on operating member.
Installation Requirements:
R001 R006 R010
Model:
IHETH113
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2012112

Range of overhead shower outlets with chromium plated plastic bodies. Maximum working temperature 75°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2012112
Expiry date:
31/12/2025
Note:
For open outlet use only.
Size:
½” BSP (F)
Marking:
DTC 59 (BRAND OF METHVEN) ON CONNECTOR
Installation Requirements:
R001 R040
Model:
X-OHEAD- GTSDEF, X-OHEAD- GTSDEFBK & X-OHEAD- RTSDEF
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2211903

Wall mounted thermostatic blending valve (chrome plated brass), incorporating a quarter turn ceramic disc headwork. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both using dome type operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection and EPDM washers incorporating stainless-steel strainers. The product is supplied with an approved shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2211903
Expiry date:
30/11/2027
Size:
3/4" BSP (F) captive nut end connections. 3/4" x 1/2" BSP (M) offset unions.
Marking:
Valve DTC & Deva on body. Shower hose NT (company logo), WRAS, year (YYYY) on sleeve. Shower Handset Deva on body.
Installation Requirements:
R001 R010 R040
Model:
PNBS01
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2211909

Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The valves are supplied with a variety of shower kits that consist of shower hoses, shower handsets and riser rail assemblies. Model is supplied with a flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2211909
Expiry date:
30/11/2027
Size:
3/4" BSP (F) or 15MM Compression
Marking:
Valves 269922BV & XMCTBV DTC 64 on rear body. Valve CTBV02BK Methven & DCT64 on body. Handsets Methven or Deva Hoses DTC 15, WRAS, Year of manufacture on conical nut.
Installation Requirements:
R001 R010 R040
Model:
COMBMEF COMBMEF/HSR8 KESBS IHKESCTS KESCTS MCTS AOCTSCPUK AOCTSEFCP KCTS KCTSMH KHCTSEFCP KLFCTS KLFCTSEFCP KRCTSEFCP KRLFCTSEFLP KRCTSEFBK VISBS MCTS MH WISBS
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 13

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.