Methven UK Limited Approvals


#2011330

Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks and single lever operating members and interconnecting flexible hoses. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2011330
Size:
½” BSP (M).
Marking:
DTC53 (brand of Methven) on rear of body. Methven on top of spout.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
WAI range: WAI3BFCP WAI3BFBK WAI3BFBB WAI3BFBN WAI3BFGM
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2108800

Wall mounted, bar type thermostatic shower mixers (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. Both inlets incorporate a stainless steel strainer and a single check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2108800
Size:
¾” BSP (M) reducer x 15mm compression.
Marking:
Methven on body. DTC14 (brand of methven) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/08/2026
Model:
SOLBEF – SOL bar shower

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2012803

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a non-rising spindle headwork with cross top operating members and a manual diverter to shower outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2012803
Size:
¾” Male BSP Inlets
Marking:
DTC34 (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
TUD03 (chrome plated) TUD03/501 (Gold finish)

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2009317

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (gold plated brass) incorporating a non-rising spindle headwork with cross top operating members and a manual diverter to shower outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2009317
Size:
¾” Male BSP Inlets
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Expiry date:
30/09/2025
Model:
CR23 (chrome plated) CR23/501 (gold finish)

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011303

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks and single lever operating members, with a pull out spray retained within a holster. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2011303
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
ABN104 Abingdon. Model added September 2023 BRG104

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011304

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). incorporating a ceramic cartridge and single lever operating member with a spring loaded, pull down trigger operated spray. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2011304
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Deva on front of body. DTC25 (brand of Methven) on rear of body.
Installation Requirements:
R001 R090
Expiry date:
30/11/2025
Model:
SPR104 – Spring. Model added September 2021: SLINKY218

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2010333

Range two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single lever or cross top (model MOT108) operating members. The spout outlets incorporates a plastic flow straightener. The products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2010333
Size:
¾” BSP (M).
Marking:
DTC34 (brand of Methven) on rear of body. Deva on front leg.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
Insignia range: INS108 EXG5071 STL108 WYE108 MOT108
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011305

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Models SM056, SM056F, SM056/501, SM056/NI & SM056/BZ incorporate ceramic cartridge headworks with single lever operating members. Models SM057 & SM057/501 incorporate non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2011305
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections or 15mm copper tails.
Marking:
DTC34 (brand of Methven) on rear of body (models SM057 & SM057/501) DTC34 (brand of Methven) on rear of body and Deva on front of body (all other models).
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
Georgian flexi tails: SM056F Georgian 15mm copper tails: SM056 SM056/501 SM056/NI SM056/BZ Venetian 15mm copper tails: SM057 SM057/501

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2012331

Two-hole, singe outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a quarter turn ceramic disc headworks with single lever type operating members. The outlet incorporates a plastic flow straightener. Product is also supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2012331
Size:
¾” BSP (M)
Marking:
DTC15 (brand of Methven) on rear of body. Methven on operating members.
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2025
Model:
KEBFCPUK – KEA bath filler.
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2012910

Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ceramic disc headworks controlling the flow. Temperature is controlled via a thermostatic cartridge with single lever type operating members which incorporate manual override buttons. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2012910
Size:
15mm compression
Marking:
Methven on top of body. DTC37 (brand of Methven) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
KHCTSEFCP KLFCTSEFCP KLFCTS KRLFCTSEFLP KRCTSEFCP
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 8 of 26

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.