Methven UK Limited Approvals


#1912307

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The INBPUWCPUK model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912307
Expiry date:
31/12/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
DTC (brand of Methven) on body Marking from November 2020: DTC53 (brand of Methven) on rear of body. Methven on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
WAIBCPUK - Wai. WAIBMCPUK - Wai. WAITBCPUK - Wai. ZON313 - Zonos. ETH313 - Ethos. INBPUWCPUK - Indra. From November 2020 the following new finishes have been added: WAIBCPUK: WAIBBB - Brushed Brass WAIBBK - Matte Black WAIBBN - Brushed Nickel WAIBGM - Gunmetal WAIBMCPUK: WAIBMBB - Brushed Brass WAIBMBK - Matte Black WAIBMBN - Brushed Nickel WAIBMGM - Gunmetal WAITBCPUK: WAITBBB - Brushed Brass WAITBBK - Matte Black WAITBBN - Brushed Nickel WAITBGM - Gunmetal Models added May 2023: 77410 T-ETH313BK - Matte Black T-ETH313BB - Brushed Brass T-ZON313 Model added September 2023: ETH313BK SVL313
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#1912311

Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912311
Expiry date:
31/12/2024
Size:
½” BSP (M)
Marking:
DTC34 (brand name of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Model:
DLT105, VW DLT105, DLT SPEC105, 208.0574.213, 320890, DLV105, NLT105, 60177101.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007801

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed.
WRAS Approval Number:
2007801
Expiry date:
31/07/2025
Size:
¾” BSP (M)
Marking:
DTC (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Model:
BRBFCPUK. ELAN108. Model added July 2020: CABFCPUK
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#1912313

Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and either single lever,or cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912313
Expiry date:
31/12/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
DTC (brand of Methven) on body
Installation Requirements:
R001 R006 R010
Model:
MOT113. INS120.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#1912314

Range of two hole, single outlet (fixed) combination tap assemblies (chromium or gold plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed.
WRAS Approval Number:
1912314
Expiry date:
31/12/2024
Size:
¾” BSP (M)
Marking:
DTC (brand of Methven) on rear of body
Installation Requirements:
R001 R005 R010
Model:
ADORE108, ADORE108/501 (gold plated), MCL108, NIL108, LACE108, EXG5062,
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#1912315

Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies(various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerators. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed.
WRAS Approval Number:
1912315
Expiry date:
31/12/2024
Marking:
Methven on body Marking from November 2020: DTC53 (brand of Methven) on rear of body. Methven on right leg.
Installation Requirements:
R001 R006 R010
Model:
RUB 108, WAIBFCPUK, AOBFCPUK, ELAN108. From November 2020 the following new finishes have been added: WAIBFCPUK: WAIBFBB - Brushed Brass WAIBFBK - Matte Black WAIBFBN - Brushed Nickel WAIBFGM - Gunmetal
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#1912321

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated or matt black finish). The SAVV104, INS104, IND104, ETH104, ETH104BK and CDN104 models incorporate a ceramic cartridge headwork with a single lever operating member. The BTN104, NTN104 and NEL104 models incorporate quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator, except for the BTN104 and SAVV104 models which have a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912321
Expiry date:
31/12/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
DTC53 on rear of body. Deva (brand of Methven) on front of body.
Installation Requirements:
R001 R006 R010
Model:
BTN104 - 2 handle square sink mixer, CDN104 - Single Lever mono sink mixer, ETH104 - Single lever mono sink mixer, INS104 - Single lever mono sink mixer, NTN104 - 2 handle lever sink mixer, SAVV104 - Mono sink mixer. Models added December 2019: IND104 - Single lever mono sink mixer, NEL104 - 2 handle lever sink mixer. Model added January 2020: ETH104BK - Single lever mono sink mixer. Model added March 2021 SHA104 - 2 handle lever sink mixer Models added March 2022 NTN104BK - 2 handle lever sink mixer, NTN104BC - 2 handle lever sink mixer, INS104BK - 2 handle lever sink mixer, INS104BK - 2 handle lever sink mixer, NEL104BK - 2 handle lever sink mixer, NEL104BC - 2 handle lever sink mixer, IND104BK - Single lever mono sink mixer, IND104BC - Single lever mono sink mixer. Model added December 2022: IHETH104 Model added January 2023: IND104-6 Models added September 2023: ATN104 TRN104
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2001319

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001319
Expiry date:
31/01/2025
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Deva (brand of Methven) on operating member. DTC32A on body.
Installation Requirements:
R001 R006 R010
Model:
SOL004 - Sequential Mono Basin Mixer. Model added September 2023 OSL004
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2001323

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001323
Expiry date:
31/01/2025
Size:
15mm copper tails 1/2" Flexible hoses
Marking:
DTC34 on rear
Installation Requirements:
R001 R006 R010
Model:
DLT104, VW DLT104, 60177210. DLT104F Added june 13 23
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2001336

Anti vandal wall mounted shower head having brass body (chromium plated brass) and EPDM ‘O’-rings. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2001336
Expiry date:
31/01/2025
Note:
Open outlet use only
Size:
15mm compression
Marking:
DTC15 on body
Installation Requirements:
R001 R040
Model:
AVSH001
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003806

Range of brass bodied shower outlets (various finishes) comprising of a wall union, shower fixing bracket and a wall elbow. Model WEPB Incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working temperature 65°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2003806
Expiry date:
31/03/2025
Note:
Open outlet use only.
Size:
See model
Marking:
DTC (brand of Methven, followed by two digit internal code) on body.
Installation Requirements:
R001
Model:
RLE35, SPE11 & SPE11M - ¾” BSP (M). SPE11SQ: 15mm compression. METHSQELB, SPE01, SPE01/G, SPE03 & WEPB: ½” BSP (M). Models added March 2020: D50010009 - ¾” BSP (M) D50010015 - ½” BSP (M) D50010022 - ¾” BSP (M) Models added December 2020: METHSQELBBK - Matte black METHSQELBBB - Brushed brass METHSQELBGM - Gun metal METHSQELBBN - Brushed nickel Models added April 2021: WEPBBB – Brushed brass WEPBBK – Matte black WEPBBN – Brushed nickel WEPBGM - Gunmetal Model added March 2024: SPE01BK - Matte black
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003349

Range of concealed thermostatic blending valves having brass bodies and NBR ‘O’-rings, incorporating a ceramic cartridge headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with a various operating members. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection), plastic filters and flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2003349
Expiry date:
31/03/2025
Size:
15mm compression
Marking:
DTC01 on body. Methven logo on faceplate.
Installation Requirements:
R001 R010 R040
Model:
KIRI 2VDIV KIRI 2VDIVA 2OBCV KAHA 2VDIV KAHA 2VDIVA KAHA 2VDIVAEX KAHA 2VDIVBK TU2VDIVSS AIO 2VDIV AIO 2VDIVABK
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003380

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003380
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Deva (brand of Methven) on operating member. DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Model:
INS313, EXG5073, WYE313.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006806

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork with either cross top, single lever or dome type operating members. The DLT SPEC103 model is supplied with metal backnuts. All other models are supplied with plastic backnuts. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar.
WRAS Approval Number:
2006806
Expiry date:
30/06/2025
Size:
½” BSP (M)
Marking:
DTC 34 (brand of Methven) on body
Installation Requirements:
R001 R006
Model:
DLT103, DLT SPEC103, KEE DLT103, KEE DLT103-4, VW DLT103, 208.0574.211, DLV103, CNTL03, KEE CNTL03 & 60177003.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004306

Range of pillar taps with brass bodies (chrome plated or gold effect finish /501 model), incorporating rising spindle headworks with cross top operating members. The products are supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004306
Expiry date:
30/04/2025
Size:
½” BSP (M)
Marking:
DTC (brand of Methven) on rear of body
Installation Requirements:
R001 R006
Model:
CR19 & CR19/501
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004329

Range of deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener (BRBSMCPUK model) or a plastic aerator (AOBSMCPUK model). The products are supplied with metal backnuts. The shower hose incorporates a stainless steel strainer and the shower handset inlet incorporates a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2004329
Expiry date:
30/04/2025
Size:
¾” BSP (M)
Marking:
Methven logo on body and operating member.
Installation Requirements:
R001 R006 R030
Model:
BRBSMCPUK & AOBSMCPUK Model added June 2020: CABSMCPUK
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004357

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The KEBPUWCPUK model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004357
Expiry date:
30/04/2025
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Methven on operating member.
Installation Requirements:
R001 R006 R010
Model:
KEBCPUK, ZH KEBCPUK & KEBPUWCPUK COMBINATION TAP ASSEMBLIES
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004324

Range of basin pillar taps (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with metal or plastic back nuts (depending on model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar.
WRAS Approval Number:
2004324
Expiry date:
30/04/2025
Size:
½” BSP (M)
Marking:
DTC 34 (brand of Methven) on rear of body
Installation Requirements:
R001 R005
Model:
CNTL01 (plastic backnuts), EXG5051 (plastic backnuts), DLT101 (plastic backnuts), DLT SPEC101 (brass backnuts), 208.0574.186 (plastic backnuts), DLV101 (plastic backnuts), KEE DLT101 (brass backnuts), KEE DLT101-4 (plastic backnuts), VW DLT101 (brass backnuts), DLT SPEC101PC (brass backnuts) & SF2401CP (brass backnuts). Model added June 2022: DLTSPEC101-4
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004330

Range of shower handsets and shower kits (see model) with plastic bodies (various finishes, see model). The inlet incorporates a plastic flow restrictor. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2004330
Expiry date:
30/04/2025
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
Methven on handset
Installation Requirements:
R001 R040
Model:
All models are chrome plated unless stated: Shower kit: AOSRCPUK, AOSRCPWHUK (White), AOSRBK (Matte black) & EKIT06/AIO. Shower handset and wall outlet bracket: AOWOBCPUK, AOWOBCPWHUK (Chrome/White) & AOWOBBK (Matte black). Shower handset: AOHSCPUK, AOHSCPWHUK (White), AOHSBK (Matte black). Shower handset and hose: AOHSCPUK HSE Model 48212 Added 13/06/2023
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004336

Two hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset and metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2004336
Expiry date:
30/04/2025
Size:
¾” BSP (M)
Marking:
Methven on body Marking from November 2020: DTC53 (brand of Methven) on rear of body. Methven on left leg.
Installation Requirements:
R001 R006 R030
Model:
WAIBSMCPUK From November 2020 the following new finishes have been added: WAIBSMCPUK: WAIBSMBB - Brushed Brass WAIBSMBK - Matte Black WAIBSMBN - Brushed Nickel WAIBSMGM - Gunmetal
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 14

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.