Range of self-closing concealed or exposed shower and tap valves (brass or chromium plated brass) incorporating a spring-loaded headwork with a dome type operating member (all models except for 741777 & 748715 models which do not have an operating member). The 748715 model is supplied with a brass backnut. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, manually operated, thermostatic blending valves with chrome plated brass bodies. The temperature is controlled via a thermostatic cartridge using a dome type operating member. Inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 85°C
A deck mounted, self-closing pillar tap (chromium plated brass), incorporating a spring-loaded headwork with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
A wall mounted, self-closing pillar tap (chromium plated brass), incorporating a spring-loaded headwork with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor and a manual lever to control the outlet temperature. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar. Temperature:60°C.
Non-metallic materials and components comply with BS6920 at 60°C
Range of WC pressure flushing valves with a time flow direct flush valve controlling the flow. The valves are operated via a push-button assembly. The valve also incorporates a lever operated isolation valve. Maximum working pressure - 5 Bar Cold water use only.
Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), Incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The inlets of 2621 models incorporate plastic strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets of 26216 models incorporate single check valve cartridge assembly (suitable for backflow protection against fluid category 2), plastic strainers and a single lever operated spherical valves. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Temposoft Mix 2’ range of self-closing basin taps (chromium plated brass), incorporating spring loaded headworks and dome type operating members. Temperature is controlled independently using a single lever operating member and the spout outlets incorporate a plastic flow straightener. The inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and plastic strainers. Model 74250015 is also supplied with spherical valves and 3/8” x ½” BSP reducers. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of self-closing valves with chromium plated brass bodies and dome type operating members. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of deck mounted, single-hole, fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate plastic aerators. Models 26216 and 26216MINI are fitted with pre fitted copper tails and provide 3/8” BSP to ½” BSP adapters and isolation valves. Models 2621 and 2621MINI are provided with pre-installed steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.
Non-metallic materials and components comply with BS6920 at 60°C
Range of urinal flushing mechanisms incorporating nylon bodies and a solenoid valve which controls the flow and is actuated via an infra-red sensor. The inlet of the solenoid valve incorporates a stainless-steel strainer. Maximum working pressure 5.0 bar. Cold water use only.
Range of wall mounted shower panels. The flow is controlled via a solenoid valve which is operated via an infrared sensor located at the bottom of the panel. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
A range of wall mounted spout outlets with chromium plated brass or stainless steel bodies, incorporating plastic aerators or flow straighteners at the outlet. Open outlet use only.
Self-closing tap assembly (chromium plated brass) incorporating spring loaded headwork with dome type operating members. The outlet incorporates a flow straightener. The product is supplied with two servicing valves and the inlet connector incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.
Wall mounted, self-closing tap assembly (chromium plated brass) with spring loaded headwork and disc press operating mechanism. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of shower panel units incorporating an overhead shower outlet. Flow is controlled via spring-loaded headworks using a push-button mechanism. The shower outlet connection incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
Range of deck mounted swivel spout outlets (brass bodies – chrome plated) incorporating aplastic flow straightener. The products are supplied with plastic back nuts. Maximum working pressure 5.0 bar Maximum operating temperature 60.0°C
Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (brass bodies – chrome plated), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C
Range of single-hole, single outlet (fixed) electronically controlled combination tap assemblies (brass bodies – chrome plated). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating on the side of the body. The spout outlets incorporate plastic flow straighteners. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The products are supplied with single lever spherical valves. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork (27216L & 28216L models) or a pressure balancing ceramic cartridge headwork (27216LEP & 28216LEP models), both with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The inlets include an adaptor and a separate isolation valve. The 27216L & 28216L models are also supplied with a brass adaptor housing a plastic strainer and a plastic flow restrictor, (for installation between the isolation valve and inlet tails). The 27216LEP & 28216LEP models are also supplied with a DZR brass adaptor housing a plastic strainer, a plastic flow restrictor and a single check valve cartridge, verified by test (suitable for backflow prevention against Fluid Category 2), (for installation between the isolation valve and inlet tails). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Page 2 of 4
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
