Range of screw down stop valves with brass bodies. Fittings incorporate EPDM seat washers and PTFE seals. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2005058

Expiry date:

31/05/2025

Size:

½” - 2” BSP (F) 15mm - 54mm compression 15mm - 20mm compression 15mm - 25mm compression 22mm - 25mm compression

Marking:

MB (Brand of Navigator used under license by Wolseley) Flow arrow, size and EN23 on body.

Installation Requirements:

R001

Model:

Compression stop cock for use with copper pipe: 236570 – CxC Brass Stopcock 15mm 236569 - CxC Brass Stopcock 22mm

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Range of manually operated dual flush WC outlet valves. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2310393

Expiry date:

31/10/2028

Size:

1 ½” BSP (M), 2” BSP (M).

Marking:

Wirquin moulded on body.

Installation Requirements:

R001 R571 R580 R581

Model:

B24004 NABIS manually operated dual flush WC outlet valves.

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

2312372

Expiry date:

31/12/2028

Size:

½” BSP (M)

Marking:

Saracen on body.

Installation Requirements:

R001 R006

Model:

C66102

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Range of single hole, single outlet, (swivel), combination tap assemblies (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311369

Expiry date:

30/11/2028

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. 15mm compression – (137040 models only)

Marking:

Nabis on operating member.

Installation Requirements:

R001 R006 R010

Model:

B08929* Vico mono pull out kitchen tap

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65˚C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2402806

Expiry date:

28/02/2029

Size:

Stainless steel braided EPDM/PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Nabis on tap Body

Installation Requirements:

R001 R006 R010

Model:

B08915* Matese monobloc kitchen tap

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company