Wolseley UK Approvals


#2007917

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightner. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007917
Expiry date:
31/07/2025
Size:
½” BSP (M)
Marking:
Swan logo on operating member
Installation Requirements:
R001 R006 R010
Model:
C58113 COMBINATION TAP ASSEMBLIES
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2202702

Center Brand range of brass and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2202702
Expiry date:
28/02/2027
Marking:
CB (brand of Wolseley) and size on body
Installation Requirements:
R001
Model:
Center Brand range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2201069

Range of plastic shower hoses (chrome effect finish) incorporating a PVC inner liner, with EPDM ‘O’-rings and/or washers. Maximum operating temperature 60°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2201069
Expiry date:
31/01/2027
Note:
Open outlet use only.
Size:
½” BSP captive nuts
Marking:
Nabis on captive nut
Installation Requirements:
R001
Model:
A05054 NAB 2M PVC LINED SHOWER HOSES
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2203316

Range of pressure reducing valves with DZR brass bodies, integral stainless steel strainer, and EPDM ‘O’-rings and membrane. The oulet pressure is adjustable between 1.5 bar and 6.0 bar. Maximum inlet supply pressure 25.0 bar. Maximum operating temperature 70°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2203316
Expiry date:
31/03/2027
Size:
see model
Marking:
Jet Range, WRAS, model & date of manufacture (YY/WW) on adhesive label on body. Flow arrow, size & DR on body
Installation Requirements:
R001 R120
Model:
K74297: 15mm compression. K74298: 22mm compression. K74299: 28mm compression. K74300: 1¼” BSP (M). Models added April 2022: K74301: 1 ½” BSP (M), K74302: 2” BSP (M).
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company
Manufacturer:
Ademco 1 GmbH
Company Name
Ademco 1 GmbH
Address
Hardhofweg 40, 7481 Mosbach

View All Listings by this Company

Print This Approval


#2112357

Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
WRAS Approval Number:
2112357
Expiry date:
31/12/2026
Size:
see model
Marking:
JET, Wolseley & Company details, WRAS approved and other technical information on dial.
Installation Requirements:
R001
Model:
171260 & 171280 – DN50 171261 & 171281 – DN65 171262 & 171282 – DN80 171263 & 171283 – DN100 171264 & 171284 – DN125 171265 & 171285 – DN150 171266 & 171286 – DN200
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2204085

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes). Model A05406 has a non-rising spindle headwork with cross top operating members. All other models have a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2204085
Expiry date:
30/04/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.
Marking:
Nabis on body.
Installation Requirements:
R001 R006 R010
Model:
A05414, A05425, A05426, A05408, A05409, A05401, A05406 & A05433 combination tap assemblies
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2204086

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes), ceramic cartridge headwork with a single lever operating member and waterfall spout outlet. The waterfall spout outlets of models A05421, A05422 & A05418 incorporate a stainless-steel mesh. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2204086
Expiry date:
30/04/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.
Marking:
Nabis on body.
Installation Requirements:
R001 R006 R160
Model:
A05415, A05421, A05422 & A05418 combination tap assemblies
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2205084

Range of pillar taps (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with either cross top (A05434 model only) or single lever operating members. The spout outlets incorporate a plastic flow straightener or a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2205084
Expiry date:
31/05/2027
Size:
D139, D139-BLK, D139-BB: ¾” BSP (M) D91 & D999M: ½” BSP (M).
Marking:
Nabis on tap body.
Installation Requirements:
R001 R005
Model:
A05404 (Chrome plated), A05411 (Chrome plated), A05434 (Chrome plated).
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2205085

Range of pillar taps (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2205085
Expiry date:
31/05/2027
Size:
½” BSP (M).
Marking:
Nabis on tap body.
Installation Requirements:
R001 R006
Model:
A05410 (Chrome plated)
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2206057

Two-hole, single outlet (fixed) combination tap assembly (chrome plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2206057
Expiry date:
30/06/2027
Size:
¾” BSP (M)
Marking:
Swan logo on operating member.
Installation Requirements:
R001 R005 R030
Model:
C58117
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 8

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.