Travis Perkins Plc Approvals


#2003090

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with a non-rising spindle headwork operated by either dome operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2003090
Expiry date:
31/03/2025
Size:
See model
Marking:
TP ON body
Installation Requirements:
R001 R006 R010
Model:
604571 Base MONO COMBINATION TAP ASSEMBLIES- 15mm copper tails or stainless-steel EPDM lined flexible hose with a ½” BSP captive nut end connections.
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval


#2011900

Range of thermostatic mixing valves incorporating brass bodies (chrome plated). The flow is controlled by quarter turn ceramic disc headwork, with dome or cube type operating members, which also diverts the flow between multiple shower outlets. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. The products are supplied with a shower hose, shower handset and overhead shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2011900
Expiry date:
30/11/2025
Size:
15mm compression
Marking:
TP (Travis Perkins logo) on rear of body.
Installation Requirements:
R001 R010 R040
Model:
555971 Yewdale & 555972 Langden
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval


#1905097

Single hole, single outlet (swivel) combination tap assembly incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator or plastic flow straightener. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905097
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
Marking:
TP ON BODY
Installation Requirements:
R001 R006 R010
Model:
853849 CORTE MONOBLOCK SINK MIXER MATT BLACKCOMBINATION TAP ASSEMBLY
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval


#2110805

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. The products are available either as a version with a pop-up waste or one with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110805
Expiry date:
31/10/2026
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
TP ON REAR OF TAP BODY
Installation Requirements:
R001 R006 R010
Model:
295313 LOWTHER BASIN MIXER COMBINATION TAP ASSEMBLIES
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval


#2012377

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork, single lever operating members and self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. The product includes a shower hose and handset. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2012377
Expiry date:
31/12/2025
Size:
¾” BSP (M).
Marking:
TP on rear of tap body.
Installation Requirements:
R001 R030
Model:
604587 Lowther Bath Shower Mixer combination tap assembly
Factor:
Travis Perkins Plc
Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Phone
+44 (0) 1604 503457

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 8

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.