San Marco Rubinetteria Srl Approvals


#2110312

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single leaver operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110312
Expiry date:
31/10/2026
Size:
Stainless steel braided EPDM lined flexible hoses assemblies incorporating ½” BSP captive nut end connections.
Marking:
SMR on body.
Installation Requirements:
R001 R006 R010
Model:
TM1 QUAD
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#2110386

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single leaver operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110386
Expiry date:
31/10/2026
Size:
Stainless steel braided EPDM lined flexible hoses assemblies incorporating ½” BSP captive nut end connections.
Marking:
SMR on body.
Installation Requirements:
R001 R006 R010
Model:
ACT3019, ACT3020 & CASSONO QUAD COMBINATION TAP ASSEMBLIES
Factor:
ABODE - a division of NORCROS GROUP (Holdings) Limited
Company Name
ABODE - a division of NORCROS GROUP (Holdings) Limited
Phone
01226 283434
General Email
info@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2004365

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004365
Expiry date:
30/04/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression end connections.
Marking:
SMR on operating member.
Installation Requirements:
R001 R006 R010
Model:
Zeno Plus
Factor:
Franke UK Ltd.
Company Name
Franke UK Ltd.
Address
West Park, MIOC, Styal Road, Manchester
Postcode
M22 5WB
Phone
0161 4360280

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#2110390

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with single leaver operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110390
Expiry date:
31/10/2026
Size:
Stainless steel braided EPDM lined flexible hoses assemblies incorporating ½” BSP captive nut end connections.
Marking:
SMR on body.
Installation Requirements:
R001 R006 R010
Model:
RIENZA RIGHT ANGLED
Factor:
Howdens Joinery
Company Name
Howdens Joinery
Address
Thorpe Road Howden East Yorkshire

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#2112356

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The cold water inlet hose Incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2112356
Expiry date:
31/12/2026
Size:
½” BSP captive nut
Marking:
SMR on body
Installation Requirements:
R001 R006 R010
Model:
GARDA BROLLE
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2112362

Single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The cold water inlet hose Incorporates approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2112362
Expiry date:
31/12/2026
Size:
½” BSP captive nut
Marking:
SMR on body
Installation Requirements:
R001 R006 R010
Model:
GARDA
Factor:
Howdens Joinery
Company Name
Howdens Joinery
Address
Thorpe Road Howden East Yorkshire

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#2203302

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203302
Expiry date:
31/03/2027
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SMR on operating member
Installation Requirements:
R001 R010 R090
Model:
All in one pull out
Factor:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2204354

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with a single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2204354
Expiry date:
30/04/2027
Marking:
SMR on body
Installation Requirements:
R001 R006 R010
Model:
VICTORIAN MONOBLOC
Factor:
Howdens Joinery
Company Name
Howdens Joinery
Address
Thorpe Road Howden East Yorkshire

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#2203346

Single hole, single outlet (swivel) combination tap assemblies with brass body (chrome plated), incorporating a ceramic cartridge headworks with single leaver operating members. The spout outlet is a pull-down spray type incorporating a plastic aerator and a push button. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203346
Expiry date:
31/03/2027
Size:
Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SMR on operating member
Installation Requirements:
R001 R090
Model:
ALVO PROFESSIONAL
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2204356

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disk headworks with a single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2204356
Expiry date:
30/04/2027
Size:
Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
SMR on body
Installation Requirements:
R001 R006 R010
Model:
ACT2001, ACT2002, ACT2003, ACT2004, ACT2076 & ACT2077 combination tap assemblies
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.