PPI Xiamen Industry Co Ltd Approvals


WRAS Approval Number: 2007806

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007806
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R090
  • Model
    907015
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005346

Range of two hole single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a non-rising spindle headwork with cross top operating members and a manually operated diverter to shower outlet. Products are supplied with a hose and handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 2005346
  • Expiry date: 31/05/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of main body.
  • Installation Requirements R001 R006 R020
  • Model
    M0605 & M0605A
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004059

Range of non-rising spindle headworks (cast brass body) with EPDM ‘O’-rings and seat washer. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 2004059
  • Expiry date: 30/04/2025
  • Size: ½” BSP (M)
  • Marking: PPI 20 or 24 on headwork.
  • Installation Requirements R001
  • Model
    VS11-BZ20. VS11-BZ24. Models added July 2020: VS5412-BZ20 VS5412-BZ24
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005345

Two hole single outlet (swivel) combination tap assembly (chromium plated brass body) with non rising spindle headwork and cross top operating members. Outlet incorporates a plastic flow straightener and the fitting is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2005345
  • Expiry date: 31/05/2025
  • Size: ½” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    907009
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010803

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated or white painted brass), incorporating quarter turn ceramic disc headworks and single lever type operating members. Outlets incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0490 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, double outlet, swivel.
  • WRAS Approval Number: 2010803
  • Expiry date: 30/06/2025
  • Size: 15mm copper tails or stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    M5010A, M5010A WH (white)
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007024

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2007024
  • Expiry date: 31/07/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    193938
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2007332

Range of wall mounted, thermostatic shower valves with chromium plated brass body. Flow is controlled by a quarter turn ceramic disc headwork with single lever operating members. Temperature is controlled by a thermostatic cartridge with a dome type operating member which incorporates a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 2007332
  • Expiry date: 31/07/2025
  • Size: 15mm Compression.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R040
  • Model
    804203 & 803203
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2011801

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non-rising spindle headworks with dome type or cross top operating members. Both models are supplied with a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2011801
  • Expiry date: 30/11/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    M0417 & 147013
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010042

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010042
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined hose assemblies with 1/2" captive nuts.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R010
  • Model
    193738 193728 143328
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010045

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2010045
  • Expiry date: 31/10/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of tap body.
  • Installation Requirements R001 R005 R010
  • Model
    193706
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 13 of 16