Range of wall mounted, bar-type, manually blending shower valves (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The shower outlet connection incorporates an approved check valve cartridge; however, the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar & maximum operating temperature 85°C.
T-type thermostatic blending valve with a DZR brass body. Temperature is pre-set under a fixed cap. The inlets incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) Maximum working pressure 5 bar. Maximum operating temperature 60°C
`2420` range of in-line key operated spherical valves with DZR brass bodies, incorporating chromium plated DZR brass balls, EPDM `O`-rings and a PTFE seat. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
Drain tap with brass body, EPDM seat and `O` rings and rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.
Range of wall mounted, concealed manual shower blending valves (chromium plated brass) with a ceramic cartridge headwork. The product is not supplied with an operating member. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
Wall mounted, concealed manual blending shower valve, with a concealed brass body, chrome plated trim, ceramic cartridge headwork and a self-cancelling (shower to shower) diverter. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks with single lever type operating members and a self cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies (chromium plated) with a drain port located between the cartridges. Maximum working pressure 16.0 (15-28mm & 1¼” - 2” BSP F) or 25.0 bar (½” - 1” BSP F). Maximum operating temperature 60°C.
Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies (chromium plated) with a drain port located between the cartridges. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves incorporating DZR brass bodies and balls (nickel plated), EPDM ‘O’-rings, PTFE seats and red or blue coloured lever type operating members. Maximum working pressure 16.0 bar for compression models Maximum working pressure 40.0 bar for 1¼”-2” RP Female & pressfit models Maximum working pressure 50.0 bar ½”-1” RP Female & pressfit models. Maximum operating temperature 85°C.
Range of inline strainers incorporating DZR brass bodies and a stainless steel mesh. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of gate valves incorporating bronze bodies and wedges. The valves operate via a non-rising spindle headwork with lock shield or hand wheel operating members. Maximum working pressure 20.0 bar. Maximum operating temperature 85ºC.
Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a nickel plated DZR brass body. For use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of brass press-fit fittings incorporating EPDM ‘O’-Rings and stainless steel crimp sleeves for use with Herz multi-layer PE-RT pipes. Maximum working pressure 10 bar. Maximum operating temperature 95°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.