Hattersley Approvals


#2008702

Range of lever operated servicing valves for use with BS EN 1057 R250 half hard copper tube, incorporating brushed chromium plated DZR brass bodies and ball, and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2008702
Expiry date:
31/08/2025
Size:
15mm & 22mm compression
Marking:
Hattersley logo (HNH) on operating member. (Hattersley is a brand of Crane Ltd). CR on body.
Installation Requirements:
R001
Model:
Hattersley Fig 108C Service Ball Valve.
Factor:
Hattersley
Company Name
Hattersley
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ

View All Listings by this Company

Print This Approval


#2009014

Range of gate valves with bronze bodies with metal seats. The valves operate via a non-rising spindle headworks that incorporate a wheel type operating member or lock shield type (see models) Maximum working pressure 20.0 bar. Maximum operating temperature 85°C

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2009014
Expiry date:
30/09/2025
Size:
Hattersley Fig 33X - size range 1/2", 3/4", 1", 1.1/4", 1.1/2" or 2" females - taper threaded to BS EN 10226-2. Hattersley Fig 33X.AT - size range 1/2", 3/4", 1", 1.1/4", 1.1/2" or 2" females - with NPT thread (ANSI B1.20.1). Hattersley Fig 33XLS - size range 1/2", 3/4", 1", 1.1/4", 1.1/2" or 2" females - taper threaded to BS EN 10226-2.
Marking:
HATTERSLEY logo, size and PN on body. WRAS temperature, max temperature, max pressure and technical information on operating member.
Installation Requirements:
R001
Model:
Hattersley Fig 33X, (Hand-Wheel operated) Hattersley Fig 33X.AT (Hand-Wheel operated) & Hattersley Fig 33XLS (Lockshield type)
Factor:
Hattersley
Company Name
Hattersley
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ

View All Listings by this Company

Print This Approval


#2007380

Range of brass bodied automatic air venting valves incorporating a plasitc float. The FIG 776 models are supplied with an isolation valve, comprising of a brass body with a plastic plunger, spring, NBR ‘O’-ring and PTFE seal. The plunger is pushed open when the air venting valve is attached and the spring closes it when the air venting valve is removed. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2007380
Expiry date:
31/07/2025
Size:
See model.
Marking:
Officine Rigamonti spa logo (‘OR’), PN, tempature, Valmat (tradename of Officine Rigamonti spa) and Made in Italy on body.
Installation Requirements:
R001 R200
Model:
RANGE OF AUTOMATIC AIR VENTING VALVES: FIG 775: 3/8” BSP (M). FIG 775: ½” BSP (M). FIG 775: ¾” BSP (M). FIG 775: 1” BSP (M). FIG 776: ½” BSP (M).
Factor:
Hattersley
Company Name
Hattersley
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ

View All Listings by this Company
Manufacturer:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Print This Approval


#2011084

Range of drain off taps incorporating DZR brass bodies, non-rising spindle operating mechanism and EPDM ‘O’-rings and seat washer. FIG 371 range incorporates a lockshield mechanism and the FIG 370 range incorporates a key operated mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2011084
Expiry date:
30/11/2025
Size:
½”, ¾” or 1” BSP (M)
Marking:
Hattersley logo, size and CR on body.
Installation Requirements:
R001
Model:
Hattersley FIG 371 & FIG 370 DRAINING TAPS
Factor:
Hattersley
Company Name
Hattersley
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ

View All Listings by this Company

Print This Approval


#2012364

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickle plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe to EN1057. Maximum working pressure 16.0 Bar. Maximum operating temperature for the Hattersley Fig 250W range 85°C. Maximum operating temperature of the Hattersley Fig 250CW is 60°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2012364
Expiry date:
31/12/2025
Size:
Hattersley Fig 250W– DN15, DN20, DN25, DN32, DN40, DN50. Hattersley Fig 250CW – 15mm, 22mm, 28mm compression.
Marking:
Hattersley Logo, flow arrow, PN, DN and CR mould on body
Installation Requirements:
R001
Model:
Hattersley Fig 250W & 250CW double check valve assemblies
Factor:
Hattersley
Company Name
Hattersley
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 3 of 7

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.