Wall mounted, bar type thermostatic blending valves with brass bodies (various finishes see models) incorporating a quarter turn ceramic disc for diverting between shower handset and overhead shower and a thermostatic cartridge controlling the temperature with a manual override button, both with dome type operating members. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of two hole, single outlet, wall mounted combination tap assembly with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members and a self-cancelling diverter to the shower outlet. Spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of single hole, single outlet combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating member. Product supplied with permanently open/click type waste outlet. Spout outlet incorporates a plastic aerator, fitting is supplied with a hose and bidette handset Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Three hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated), incorporating ceramic cartride headworks and single lever operating member. Spout outlet incorporates a plastic aerator. Product is supplied with a pop-up waste. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of three hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headwork with dome or lever type operating member. Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of two hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headwork with dome, push on/off type operating member. Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Deck mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body) variety of finishes, incorporating quarter turn ceramic disc headworks with cube type operating members. The spout outlet and the side valves are connected by stainless steel braided PEX lined flexible hose assemblies. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of overhead shower outlets with chromium plated brass bodies. The inlets incorporate a stainless steel strainer. The 26 578 xxx model also incorporates a flow regulator.
Non-metallic materials and components comply with BS6920 at 70°C
Wall mounted, bar type, thermostatic shower blending valves with brass bodies (various finishes - see model), incorporating a 2-way ceramic disc diverter headwork with a dome type operating member controlling the flow between each shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The product is supplied with an overhead shower, shower hose and handset. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted, exposed, manual shower blending valve with a brass body (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product also incorporates a self-cancelling diverter valve which diverts the flow between an overhead shower or shower handset. The product is supplied with a shower hose, handset, overhead shower and a shower rail. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, three-hole single outlet (fixed) bath and shower mixers with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with cross top operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose and handset. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Overhead shower outlet (brass body, various finishes) with an EPDM `O`-ring and a stainless-steel filter. The shower head incorporates a flow regulator. Open outlet use only.
Non-metallic materials and components comply with BS6920 at 60°C
Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with lever type pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature (See models)
Three-hole, single outlet, fixed combination tap assembly with chromium plated brass body. Incorporating a quarter turn ceramic disc headwork with single lever operating member.The spout outlet incorporates a plastic aerator. The product is supplied with copper tube for installation between the headworks and spout. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of three hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes) incorporating quarter turn ceramic disc headworks with single lever or dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with copper tube for installation between the headworks and spout. Maximum working pressure 10 Bar.
Non-metallic materials and components comply with BS6920 at 65°C
Three-hole, single outlet (fixed), combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating members and self-cancelling diverter to shower outlet. The product is supplied with a shower hose and handset. The shower hose inlet incorporates an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass body, various finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (Various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted two-hole, single outlet (fixed) combination tap assembly (brass body, various finishes) incorporating a ceramic cartridge headwork, single lever operating member and a self-cancelling diverter to the shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Page 9 of 21
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
