Hansgrohe SE Approvals


#1909088

Range of concealed thermostatic shower mixers (brass bodies - various finishes). The flow is controlled by a four-way manual diverter (3 on, 1 off positions) with single lever, cube type or dome type operating members (depending on model). The temperature is controlled independently via a thermostatic cartridge with single lever, cube type, dome type or cross top operating members (depending on model). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1909088
Expiry date:
30/09/2024
Note:
This approval does not include a shower hose and handset The 01 800 180 concealed installation set is not approved in its own right.
Size:
½” BSP (F)
Marking:
AXOR on faceplate
Installation Requirements:
R001 R010 R040
Model:
Concealed installation set 01 800 180 for use with finish sets: 10 720 xxx AXOR Starck 10 726 xxx AXOR Starck X 11 733 xxx AXOR Urquiola 12 716 xxx AXOR Starck Organic 15 771 xxx Hansgrohe PuraVida 16 820 xxx AXOR Montreux 16 821 xxx AX Montreux 17 725 xxx AXOR Carlton 18 750 xxx AXOR Massaud 34 725 xxx AXOR Citterio M 38 720 xxx AXOR Uno 39 720 xxx AXOR Citterio 39 725 xxx AXOR xxx denotes the finish and is replaced with: 000 – Chrome 020 – PVD polished chrome 260 – PVD brushed chrome 830 – PVD polished nickel 820 – PVD brushed nickel 990 – PVD polished gold optic 250 – PVD brushed gold optic 300 – PVD polished red gold 310 – PVD brushed red gold 130 – PVD polished bronze 140 – PVD brushed bronze 330 – PVD polished black chrome 340 – PVD brushed black chrome 930 – PVD polished brass 950 – PVD brushed brass 800 – PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1907356

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass body - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter. The shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
1907356
Expiry date:
31/07/2024
Note:
This approval does not include a shower hose and handset, overhead shower or bath spout.
Size:
¾” BSP (F)
Marking:
AXOR on face plate
Installation Requirements:
R001 R010 R040
Model:
46 420 xx0 AXOR Edge Single lever bath mixer for concealed installation with integrated security combination, 46 421 xx0 AXOR Edge Single lever bath mixer for concealed installation with integrated security combination – Diamond cut, 46 450 xx0 AXOR Edge Single lever bath mixer for concealed installation, 46 451 xx0 AXOR Edge Single lever bath mixer for concealed installation – Diamond cut. To be used in conjuction with I-Box 01700180 Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1909333

Manual, click type cartridge headwork with a plastic body, EPDM ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0440 Headworks
WRAS Approval Number:
1909333
Expiry date:
30/09/2024
Size:
24mm OD
Marking:
Hansgrohe, model & technical information on body.
Installation Requirements:
R001
Model:
95758000
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1910321

Raindance Select E range of wall ceiling or wall mounted shower outlets having brass bodies. Maximum operating temperature 70°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1910321
Expiry date:
31/10/2024
Size:
½” BSP(M)
Marking:
Hansgrohe on body
Installation Requirements:
R001 R040
Model:
26 608 xxx Hansgrohe Raindance Select E overhead shower 300 2jet EcoSmart. 26 609 xxx Hansgrohe Raindance Select E overhead shower 300 2jet EcoSmart. ‘xxx’ denotes the finish which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1910325

Range of handshowers having a plastic body (with various finishes) EPDM ‘o’ rings. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1910325
Expiry date:
31/10/2024
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
AXOR on body
Installation Requirements:
R001 R040
Model:
45 720 xxx Axor one hand shower 2jet Where xxx denotes the surface finish, which can be replaced by: -000 Chrome/Mirror Glass -350 Satin black/black -360 Satin black/Brushed bronce -600 Chrome/Black Glass -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic -670 matt black, -700 matt white
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1910331

Spout outlet with brass body (various finishes) incorporating a plastic spray outlet. Maximum operating temperature 70°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
1910331
Expiry date:
31/10/2024
Note:
Open outlet use only.
Size:
¾” BSP (M)
Marking:
Hansgrohe on body
Installation Requirements:
R001 R040
Model:
32 543 xxx Hansgrohe Metropol. ‘xxx’ denotes the surface finish and can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1910333

Range of combined bath filler, waste and overflow assemblies (plastic body - various finishes). The outlets incorporate plastic aerator. Maximum operating temperature 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
1910333
Expiry date:
31/10/2024
Note:
Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN R090 applies.
Size:
¾” BSP(M)
Marking:
Hansgrohe on trim set
Installation Requirements:
R001 R090 R160
Model:
58 112 xxx 58 309 xxx 58117 xxx 58 304 xxx 58 115 180 58 305 180 58 116 180 58 306 180 Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1910006

Range of overhead shower outlets with chromium plated plastic bodies. The 26 464 xxx model incorporates an EPDM seal and plastic strainer on the inlet. The 26 465 xxx model incorporates a combined EPDM seal and stainless steel strainer, as well as a plastic flow regulator on the inlet. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1910006
Expiry date:
31/10/2024
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Hansgrohe on edge of shower head.
Installation Requirements:
R001 R040
Model:
26 464 xxx Hansgrohe Croma Overhead shower 220 1jet 26 465 xxx Hansgrohe Croma Overhead shower 220 1jet EcoSmart Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1910043

Range of three hole, wall mounted, single outlet (fixed) combination tap assemblies with brass bodies (various finishes, see model), incorporating quarter turn ceramic disc headworks and dome type operating members located on the supplied basic set (18 113 180) (brass finish). Outlet Incorporates a stainless steel strainer. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
1910043
Expiry date:
31/10/2024
Size:
½” BSP (F)
Marking:
AXOR on body.
Installation Requirements:
R001 R010 R040
Model:
18 112 xxx AXOR Massaud 3-hole basin mixer for concealed installation with spout 170 mm wall-mounted 18 115 xxx AXOR Massaud 3-hole basin mixer for concealed installation with spout 262 mm wall-mounted Basic set = 18 113 180 available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1910048

Range of shower handsets (brass body – various finishes) incorporating stainless steel strainer located on the inlet. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1910048
Expiry date:
31/10/2024
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
Hansgrohe on body
Installation Requirements:
R001 R040
Model:
28 580 xxx Hansgrohe Croma 100 Mono hand shower 28 583 xxx Hansgrohe Croma 100 Mono hand shower EcoSmart 9 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 7 of 41

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.