Shower handset with a plastic body in a variety of finishes (see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer, and a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2110090

Expiry date:

31/10/2026

Note:

Open outlet use only

Size:

½” BSP (M).

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Model:

28 561 XXX Hansgrohe Crometta hand shower mono green 6 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110094

Expiry date:

31/10/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR (brand of Hansgrohe SE) on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

39024XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set, 39023XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set, 39022XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39021XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39151XXX - AXOR Citterio - Single lever basin mixer 280 with lever handle for wash bowls with waste set - rhombic cut, 39081XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set - rhombic cut, 39071XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set - rhombic cut, 39001XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set - rhombic cut. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted and overhead shower outlets, incorporating stainless steel strainers and flow regulators at the inlets. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2110309

Expiry date:

31/10/2026

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Model:

26 226 xxx HG 250 1jet headshower 26 227 xxx HG 250 1jet heedshower 9l 26 230 xxx HG 360 1jet headshower 26 228 xxx HG 250 1jet headshower ceiling 26 229 xxx HG 250 1jet headshower 9l celing 26 231 xxx HG 360 1jet headshower ceiling 26 232 xxx HG 250 3jet headshower wall 26 233 xxx HG 250 3jet headshower 9l wall 26 234 xxx HG 360 3jet headshower wall

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Shower handset with a plastic body in a variety of finishes (see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer, and a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2110091

Expiry date:

31/10/2026

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

AXOR (brand of Hansgrohe SE) on body.

Installation Requirements:

R001 R040

Model:

26 025 xxx AXOR Showers/Front Hand shower 85 1jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some products are supplied with a pop-up waste or a click type waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110027

Expiry date:

31/10/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

Hansgrohe Talis S Single lever basin mixer 80 range: 72 010 xxx with pop-up waste set, 72 011 xxx with push-open (click type) waste set, 72 012 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 CoolStart range: 72 013 xxx with pop-up waste set, 72 014 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 80 LowFlow range: 72 015 xxx with pop-up waste set, 72 018 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 range: 72 020 xxx with pop-up waste set, 72 021 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 CoolStart range: 72 022 xxx with pop up waste set, 72 023 xxx without waste set. Hansgrohe Talis S Single lever basin mixer 100 LowFlow 72 024 xxx with pop up waste set, 72 025 xxx without pop-up waste. Hansgrohe Talis S Single lever basin mixer 190 range: 72 031 xxx with pop-up waste, 72 032 xxx without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 36 100 xxx model is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110072

Expiry date:

31/10/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections

Marking:

AXOR (brand of Hansgrohe SE) on body.

Installation Requirements:

R001 R006 R009 R010

Model:

36 100 xxx AXOR Citterio E Single lever basin mixer 130 with pop-up waste set. 36 101 xxx AXOR Citterio E Single lever basin mixer 130 with waste set. 36 102 xxx AXOR Citterio E Single lever basin mixer 90 for hand washbasins with waste set. 36 103 xxx AXOR Citterio E Single lever basin mixer 190 for wash bowls with waste set. 36 104 xxx AXOR Citterio E Single lever basin mixer 250 for wash bowls with waste set. 36 105 xxx AXOR Citterio E Pillar tap 90 without waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet has a plastic aerator and model 31 531 XXX is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111034

Expiry date:

30/11/2026

Size:

Stainless steel braided, PEX lined hoses assemblies incorporating 3/8" captive nut end connection.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

Hansgrohe Focus Single lever basin mixer 230 31 531 xxx 31 532 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated) incorporating a joystick controlled ceramic cartridge headwork. The spout outlets incorporate a plastic aerator. Models 39 031 xxx & 39 035 xxx are supplied with lever operated pop-up wastes and model 39 032 xx is supplied with a pop-up waste kit. Maximum working pressure: 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2111039

Expiry date:

30/11/2026

Note:

No testing has been performed on the pop-up waste

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" captive nuts end connections.

Marking:

Axor on body.

Installation Requirements:

R001 R006 R009 R010

Model:

39 031 xxx Axor Citterio Single lever basin mixer 160 39 032 xxx Axor Citterio Single lever basin mixer 160 39 035 xxx Axor Citterio Single lever basin mixer 90 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower handsets plastic bodies (various finishes) and EPDM ‘O’-rings. All models include a button on the shower face which alters the spray pattern. The product incorporates either a plastic strainer (26 050 & 26 530) or a stainless-steel strainer and a plastic flow regulator (26 051 & 26 531) on the inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2111049

Expiry date:

30/11/2026

Note:

Open outlet use only.

Size:

½” BSP male

Marking:

26 050 xxx- AXOR on body (26 050 xxx only) Hansgrohe on handle (all other models)

Installation Requirements:

R001 R040

Model:

26 530 xxx 26 530 400 26 531 xxx 26 531 400 26 050 xxx 26 051 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe Wasselonne S.A.S

Company Name

Hansgrohe Wasselonne S.A.S

Address

Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company