Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see models) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products are supplied with either a lever type waste (model 39 034) or screw down waste (39 037). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109057

Expiry date:

30/09/2026

Size:

stainless steel or nylon braided, PEX lined flexible hoses with 3/8” BSP captive nut end connectors.

Marking:

Axor on body

Installation Requirements:

R001 R006 R009 R010

Model:

AXOR Citterio Single lever basin mixer 190 with pin handle 39 034 xxx pop-up waste set 39 037 xxx screw down waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies, comprising of a concealed brass body, and a separate trim set (brass body - various finishes), incorporating a ceramic cartridge headwork with a joystick type operating member and a spout outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

2110016

Expiry date:

31/10/2026

Note:

The 13 622 180 Hansgrohe Basic set is not approved in its own right.

Size:

½” BSP (F) (to 13 622 180 Hansgrohe Basic set).

Marking:

AXOR (brand of Hansgrohe SE) on spout.

Installation Requirements:

R001 R010 R040

Model:

Concealed body: 13 622 180 Hansgrohe Basic set. Which must be installed with one of the following trim sets: 36 106 xxx AXOR Citterio E. 36 114 xxx AXOR Citterio E. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Floor mounted, single hole, single outlet (fixed) combination tap assembly with brass body (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet (activated by pulling the end of the spout surround). The shower outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is also supplied with shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110036

Expiry date:

31/10/2026

Size:

½” BSP (F)

Marking:

AXOR (brand of Hansgrohe SE) on body.

Installation Requirements:

R001 R010 R040

Model:

10 456 xxx AXOR Starck Single lever bath mixer floor-standing with pin handle. 10 455 xxx AXOR Starck Single lever bath mixer floor-standing with lever handle. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Shower handset with a plastic body in a variety of finishes (see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer, and a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2110090

Expiry date:

31/10/2026

Note:

Open outlet use only

Size:

½” BSP (M).

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Model:

28 561 XXX Hansgrohe Crometta hand shower mono green 6 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies with various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110094

Expiry date:

31/10/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR (brand of Hansgrohe SE) on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

39024XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set, 39023XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set, 39022XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39021XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set, 39151XXX - AXOR Citterio - Single lever basin mixer 280 with lever handle for wash bowls with waste set - rhombic cut, 39081XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and waste set - rhombic cut, 39071XXX - AXOR Citterio - Single lever basin mixer 160 with lever handle and pop-up waste set - rhombic cut, 39001XXX - AXOR Citterio - Single lever basin mixer 90 with lever handle for hand washbasins with pop-up waste set - rhombic cut. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted and overhead shower outlets, incorporating stainless steel strainers and flow regulators at the inlets. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2110309

Expiry date:

31/10/2026

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Model:

26 226 xxx HG 250 1jet headshower 26 227 xxx HG 250 1jet heedshower 9l 26 230 xxx HG 360 1jet headshower 26 228 xxx HG 250 1jet headshower ceiling 26 229 xxx HG 250 1jet headshower 9l celing 26 231 xxx HG 360 1jet headshower ceiling 26 232 xxx HG 250 3jet headshower wall 26 233 xxx HG 250 3jet headshower 9l wall 26 234 xxx HG 360 3jet headshower wall

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Shower handset with a plastic body in a variety of finishes (see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer, and a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2110091

Expiry date:

31/10/2026

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

AXOR (brand of Hansgrohe SE) on body.

Installation Requirements:

R001 R040

Model:

26 025 xxx AXOR Showers/Front Hand shower 85 1jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company