Range of bib taps incorporating brass bodies. The BTHUCV1/2 and BTHUCV3/4 models incorporate an approved single check valve cartridge on the inlet and the outlet (hose union), however, the complete product has not been fully tested to demonstrate it provides backflow protection. The BTHUCV1/2 and BTHUCV3/4 models also incorporate a drain port. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1750 Taps

Section Subtitle:

Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.

WRAS Approval Number:

2109379

Expiry date:

30/09/2026

Size:

BTHU1/2 & BTHUCV1/2 : ½” BSP (M), BTHU3/4 & BTHUCV3/4: ¾” BSP (M).

Marking:

CUB & SIZE ON BODY

Installation Requirements:

R001 R040

Model:

BTHU1/2, BTHU3/4, BTHUCV1/2 & BTHUCV3/4 BIB TAPS

Factor:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster

Postcode

DY11 7QN

View All Listings by this Company

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2110393

Expiry date:

31/10/2026

Size:

See model.

Marking:

Cupro Fit and size on body.

Installation Requirements:

R001

Model:

EKYH0000, Equal coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, Straight coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, Reducing coupler: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, Fitting reducer: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, Female adapter: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, Male adapter: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, Long straight coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90° Elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90° Street elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, Reducing elbow: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45° Elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45° Street elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, Crossover:15mm, 22mm, 28mm EKYH0167, Part crossover: 15mm, 22mm, 28mm EKYH0201, Equal Tee: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, Reducing tee: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, Cap, size: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm

Factor:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster

Postcode

DY11 7QN

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107337

Expiry date:

31/07/2026

Size:

See model

Marking:

CUPRO-FIT & size on body.

Installation Requirements:

R001

Model:

PRESS FIT 90° Elbow: PFEL15, PFEL22, PFEL28, PFEL35, PFEL42, PFEL54 PRESS FIT 90° Street Elbow: PFELS15, PFELS22, PFELS28, PFELS35, PFELS42, PFELS54 PRESS FIT 45° Elbow: PFEL1545, PFEL2245, PFEL2845, PFEL3545, PFEL4245, PFEL5445 PRESS FIT 45° Street Elbow: PFELS1545, PFELS2245, PFELS2845, PFELS3545, PFELS4245, PFELS5445 PRESS FIT Full Crossover PFFCO15, PFFCO22, PFFCO28 PRESS FIT Part Crossover PFPCO15, PFPCO22. PFPCO28 PRESS FIT Coupler&Slip Coupler PFCO15, PFCO22, PFCO28, PFCO35, PFCO42, PFCO54 PFSC15, PFSC22, PFSC28, PFSC35, PFSC42, PFSC54 PRESS FIT Equal Tee PFTE15, PFTE22, PFTE28, PFTE35, PFTE42, PFTE54 PRESS FIT Reducing TEE PFTE151522, PFTE 221515, PFTE 221522 PFTE 222215, PFTE 222228, PFTE 281515 PFTE 281522, PFTE 282215, PFTE 282222 PFTE 282228, PFTE 282815, PFTE 282822 PFTE 282835, PFTE 352222, PFTE 352235 PFTE 352822, PFTE 352828, PFTE 352835 PFTE 353515, PFTE 353522, PFTE 353528 PFTE 402828, PFTE 423535, PFTE 422842 PFTE 423542, PFTE 424215, PFTE 424222 PFTE 424228, PFTE 424235, PFTE 545415 PFTE 545428, PFTE 545435, PFTE 544242 PFTE 545442 PRESS FIT Fitting Reducer FTGXC PFRE2215, PFRE 2815, PFRE 2822, PFRE 3515 PFRE 3522, PFRE 3528, PFRE 4215, PFRE 4222 PFRE 4228, PFRE 4235, PFRE 5415, PFRE 5422 PFRE 5428, PFRE 5435, PFRE 5442 PRESS FIT Reducer Coupler CXC PFRC2215, PFRC 2815, PFRC 2822, PFRC 3515 PFRC 3522, PFRC 3528, PFRC 4215, PFRC 4222 PFRC 4228, PFRC 4235, PFRC 5415, PFRC 5422 PFRC 5428, PFRC 5435, PFRC 5442 PRESS FIT End Cap PFEC15, PFEC22, PFEC28, PFEC35, PFEC42, PFEC54

Factor:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster

Postcode

DY11 7QN

View All Listings by this Company

Range of Cupro- Fit press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404052

Expiry date:

30/04/2029

Size:

see models

Marking:

Cupro-Fit & size etched on body.

Installation Requirements:

R001

Model:

PFEL15 PRESS FIT 15mm x 90° Elbow PFEL22 PRESS FIT 22mm x 90° Elbow PFEL28 PRESS FIT 28mm x 90° Elbow PFEL35 PRESS FIT 35mm x 90° Elbow PFEL42 PRESS FIT 42mm x 90° Elbow PFEL54 PRESS FIT 54mm x 90° Elbow PFCO15 PRESS FIT 15mm Coupler PFCO22 PRESS FIT 22mm Coupler PFCO28 PRESS FIT 28mm Coupler PFCO35 PRESS FIT 35mm Coupler PFCO42 PRESS FIT 42mm Coupler PFCO54 PRESS FIT 54mm Coupler PFSC15 PRESS FIT 15mm Slip Coupler PFSC22 PRESS FIT 22mm Slip Coupler PFSC28 PRESS FIT 28mm Slip Coupler PFSC35 PRESS FIT 35mm Slip Coupler PFSC42 PRESS FIT 42mm Slip Coupler PFSC54 PRESS FIT 54mm Slip Coupler PFELS15 PRESS FIT 15mm x 90° Street Elbow PFELS22 PRESS FIT 22mm x 90° Street Elbow PFELS28 PRESS FIT 28mm x 90° Street Elbow PFELS35 PRESS FIT 35mm x 90° Street Elbow PFELS42 PRESS FIT 42mm x 90° Street Elbow PFELS54 PRESS FIT 54mm x 90° Street Elbow PFEL1545 PRESS FIT 15mm x 45° Elbow PFEL2245 PRESS FIT 22mm x 45° Elbow PFEL2845 PRESS FIT 28mm x 45° Elbow PFEL3545 PRESS FIT 35mm x 45° Elbow PFEL4245 PRESS FIT 42mm x 45° Elbow PFEL5445 PRESS FIT 54mm x 45° Elbow PFELS1545 PRESS FIT 15mm x 45° Street Elbow PFELS2245 PRESS FIT 22mm x 45° Street Elbow PFELS2845 PRESS FIT 28mm x 45° Street Elbow PFELS3545 PRESS FIT 35mm x 45° Street Elbow PFELS4245 PRESS FIT 42mm x 45° Street Elbow PFELS5445 PRESS FIT 54mm x 45° Street Elbow PFRC2215 PRESS FIT 22mm x 15mm Reducing Coupler PFRC2815 PRESS FIT 28mm x 15mm Reducing Coupler PFRC2822 PRESS FIT 28mm x 22mm Reducing Coupler PFRE2215 PRESS FIT 22mm x 15mm Fitting Reducer PFRE2815 PRESS FIT 28mm x 15mm Fitting Reducer PFRE2822 PRESS FIT 28mm x 22mm Fitting Reducer PFRE3522 PRESS FIT 35mm x 22mm Fitting Reducer PFRE3528 PRESS FIT 35mm x 28mm Fitting Reducer PFRE4222 PRESS FIT 42mm x 22mm Fitting Reducer PFRE4228 PRESS FIT 42mm x 28mm Fitting Reducer PFRE4235 PRESS FIT 42mm x 35mm Fitting Reducer PFRE5435 PRESS FIT 54mm x 35mm Fitting Reducer PFRE5442 PRESS FIT 54mm x 42mm Fitting Reducer PFEC15 PRESS FIT 15mm End Cap PFEC22 PRESS FIT 22mm End Cap PFEC28 PRESS FIT 28mm End Cap PFEC35 PRESS FIT 35mm End Cap PFEC42 PRESS FIT 42mm End Cap PFEC54 PRESS FIT 54mm End Cap PFFCO15 PRESS FIT 15mm Full Crossover PFFCO22 PRESS FIT 22mm Full Crossover PFPCO15 PRESS FIT 15mm Part Crossover PFPCO22 PRESS FIT 22mm Part Crossover PFTE15 PRESS FIT 15mm Equal Tee PFTE22 PRESS FIT 22mm Equal Tee PFTE28 PRESS FIT 28mm Equal Tee PFTE35 PRESS FIT 35mm Equal Tee PFTE42 PRESS FIT 42mm Equal Tee PFTE54 PRESS FIT 54mm Equal Tee PFTE222215 PRESS FIT 22mm x 22mm x 15mm Branch Reducing Tee PFTE282815 PRESS FIT 28mm x 28mm x 15mm Branch Reducing Tee PFTE282822 PRESS FIT 28mm x 28mm x 22mm Branch Reducing Tee PFTE353515 PRESS FIT 35mm x 35mm x 15mm Branch Reducing Tee PFTE353522 PRESS FIT 35mm x 35mm x 22mm Branch Reducing Tee PFTE353528 PRESS FIT 35mm x 35mm x 28mm Branch Reducing Tee PFTE424215 PRESS FIT 42mm x 42mm x 15mm Branch Reducing Tee PFTE424222 PRESS FIT 42mm x 42mm x 22mm Branch Reducing Tee PFTE424228 PRESS FIT 42mm x 42mm x 28mm Branch Reducing Tee PFTE424235 PRESS FIT 42mm x 42mm x 35mm Branch Reducing Tee PFTE545422 PRESS FIT 54mm x 54mm x 22mm Branch Reducing Tee PFTE545428 PRESS FIT 54mm x 54mm x 28mm Branch Reducing Tee PFTE545435 PRESS FIT 54mm x 54mm x 35mm Branch Reducing Tee PFTE545442 PRESS FIT 54mm x 54mm x 42mm Branch Reducing Tee PFTE221522 PRESS FIT 22mm x 15mm x 22mm One End Reducing Tee

Factor:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster

Postcode

DY11 7QN

View All Listings by this Company