Range of drain taps with bronze bodies and rising spindle headwork. Maximum working pressure 16.0 bar Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, metal or plastic - For above ground use only.

WRAS Approval Number:

1909700

Expiry date:

30/09/2024

Size:

½”, ¾”, 1” BSP (M)

Marking:

Crane & size on body

Installation Requirements:

R001 R511

Model:

D340 & D341

Factor:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Phone

01473 277 364

General Email

bwiggins@crane-ltd.co.uk

View All Listings by this Company

Range of spherical valves with DZR brass bodies, chrome plated brass balls, EPDM ‘O’ rings and PTFE seat. Threaded ends: maximum working pressure 25.0 bar. Compression ends: maximum working pressure 16.0 bar. Press-fit ends: maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

1907008

Expiry date:

31/07/2024

Size:

SEE MODEL

Marking:

Crane on cap or operating member From May 2020 the marking will be: CRANE, PN, model, max temperature, max pressure and WRAS temperature on operating member. DN, PN, CR and size on body. Models D171ALS AT and D171ALS - CRANE, max temperature and WRAS temperature on cap. DN, PN, CR and size on body.

Installation Requirements:

R001

Model:

Crane D171A & D171AEXS: ¼” – 2” BSP. Crane D171AT & D171ALS: ½” – 2” BSP. Crane D171A AT & D171AEXS AT: ¼” – 2” ANSI. Crane D171AT AT & D171ALS AT: ½” – 2” ANSI. Crane D171AC, D171ACEXS, D171ACT & D171ACLS: 15mm compression and 54mm compression only. Crane D171A.PF, D171ALS.PF, D171A EXS.PF & D171AT.PF: Press fit ends 1/2" x 15mm, 1/2" x 18mm, 3/4" x 22mm, 1" x 28mm, 1.1/4" x 35mm, 1.1/2" x 42mm, 2" x 54mm. Press fit connections for use with the following piping: BS EN1057 - R250 copper 15mm-28mm, Geberit Mapress Stainless Steel 15mm-54mm & Geberit Mapress Carbon Steel 15mm-54mm Compression Fit connections for use with copper pipe to BS EN1057 R250. Above ground application for all D171A Variants LS denotes lockshiled model. EXS denotes extended stem. AT/ACT denotes tee handle. .PF denotes pressfit. AT suffix denotes American Thread From May 2020 the following modification has been made: All threaded variants of this approval now have an increased wall thickness.

Factor:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Phone

01473 277 364

General Email

bwiggins@crane-ltd.co.uk

View All Listings by this Company

Range of `Y`-patterned strainers with bronze bodies incorporating a stainless steel mesh strainer and PTFE washers. The D298.PF models incorporate copper threaded x push fit end connections incorporating butyl rubber ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

WRAS Approval Number:

1910702

Expiry date:

31/10/2024

Size:

See model.

Marking:

CRANE, size, PN and flow arrow on body. CRANE, WRAS, temperature, max temperature/pressure and other technical info on cap.

Installation Requirements:

R001 R120

Model:

Crane D298: ½” - 2” BSP (F) taper. Crane D298 AT (threaded): ½” - 2” ANSI B1.20.1 Crane D298.PF: 15mm - 54mm press fit inlet/outlet connections. Press Fit connections are for use with the following piping: Copper pipe and Geberit Mapress Stainless Steel 15mm to 54mm.

Factor:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Phone

01473 277 364

General Email

bwiggins@crane-ltd.co.uk

View All Listings by this Company

Range of globe type spring loaded, resilient trim, non-return valves with cast iron bodies (black epoxy powder coated) with stainless steel springs and guides. Maximum working pressure 16.0 bar. The maximum operating temperature is 85°C.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

1908819

Expiry date:

31/08/2024

Size:

See Model

Marking:

CRANE, PN, WRAS, D130W & TEMPERATURE ON DATAPLATE ON BODY DN, PN, CRANE, FLOW ARROW & DATE OF MANUFACTURE YY/MM/DD ON BODY

Installation Requirements:

R001

Model:

D130W

Factor:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Phone

01473 277 364

General Email

bwiggins@crane-ltd.co.uk

View All Listings by this Company

Range of gate valves with bronze bodies and wedges and a PTFE packing ring. The valves are operated via a non-rising spindle with either a hand wheel operating member or are the Lockshield type. Maximum working pressure 16.0 bar, maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2001701

Expiry date:

31/01/2025

Size:

see model

Marking:

Model Crane D155C - Size & Crane on Body. Crane, WRAS Max Temp, PN, Model & Standard on Disc on Operating Member. Model Crane D255C - Size & Crane on Body. Crane, WRAS Max Temp & Standard on Spindle lock shield.

Installation Requirements:

R001

Model:

Crane D155C - Compression ended Bronze Gate Valve (handwheel type). Size range 15mm, 22mm, 28mm, 35mm, 42mm and 54mm. Crane D255C - Compression ended Bronze gate valve (lockshield type). Size range 15mm, 22mm, 28mm, 35mm, 42mm and 54mm. Pressure Rating PN 16. UK end connection: compression ends to BS EN 1057:2006 half hard R250 copper.

Factor:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Phone

01473 277 364

General Email

bwiggins@crane-ltd.co.uk

View All Listings by this Company