Cistermiser Ltd Approvals


#2211305

Range of automatic urinal flush valves with a plastic body. STD - Maximum working pressure 6.0 bar. LP - Maximum working pressure 0.5 bar. Cold water use only

Section:
1307 Flushing Mechanisms
Section Subtitle:
Urinals.
WRAS Approval Number:
2211305
Expiry date:
30/11/2027
Size:
½” BSP (F)
Marking:
Cistermiser and product info on adhesive label. Cistermiser and flow on body.
Installation Requirements:
R001 R075
Model:
STD LP
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Phone
+44 118 969 1611 Fax: 0118 944 1426

View All Listings by this Company

Print This Approval


#2305327

Concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by an electronically controlled flush valve. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2305327
Expiry date:
31/05/2028
Size:
1/2” BSP (M).
Marking:
Cistermiser on IR sensor, Adhesive label on cistern stating Cistermiser, address, model and other tech info.
Installation Requirements:
R001 R280 R556 R581 R560
Model:
EasyflushEVO Cistern.
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Phone
+44 118 969 1611 Fax: 0118 944 1426

View All Listings by this Company

Print This Approval


#2307042

DC pipe interrupter with nylon body. The inlet incorporates a plastic flow regulator. Maximum working pressure 10 Bar Cold water use only

Section:
0014 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2. Type DC - Pipe interrupter with permanent atmosphere vent. The device must be fitted with the lowest point of the air aperture not less than 150mm above the free discharge point, or spillover level of an appliance, and have no valve, flow restrictor or tap on its outlet.
WRAS Approval Number:
2307042
Expiry date:
31/07/2028
Size:
¾” BSP (F) inlet x ¾” BSP (M) outlet
Marking:
Cistermiser on body
Installation Requirements:
R001 R165
Model:
EF/BF
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Phone
+44 118 969 1611 Fax: 0118 944 1426

View All Listings by this Company

Print This Approval


#2307323

IR sensor activated dual flush WC siphon valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. Cold water only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2307323
Expiry date:
31/07/2028
Size:
See model.
Marking:
Cistermiser etched on IR Sensor.
Installation Requirements:
R001 R571 R581
Model:
EasyflushEVO 1.5" & EasyflushEVO 2".
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Phone
+44 118 969 1611 Fax: 0118 944 1426

View All Listings by this Company

Print This Approval


#2312351

‘Tanktronic‘ range of water level monitoring kits comprising of a main control unit, vent box and single or double stainless steel sensors. Open outlet use only. Maximum operating temperature 23°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2312351
Expiry date:
31/12/2028
Note:
IRN R008 only applies to the sensors.
Size:
24.50MM OD (sensor outer diameter – product has no water connections).
Marking:
Tanktronic, Keraflow, model, serial no & production info on sensor box & vent box assembly.
Installation Requirements:
R001 R008
Model:
TT/41 - Tanktronic Main Control Unit with Single 3m Sensor and Vent box assembly, TT/42 - Tanktronic Main Control Unit with Single 5m Sensor and Vent box assembly, TT/43- Tanktronic Main Control Unit with Twin 3m Sensor and Vent box assembly, TT/44 - Tanktronic Main Control Unit with Twin 5m Sensor and Vent box assembly.
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Phone
+44 118 969 1611 Fax: 0118 944 1426

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.