Atlantic Plastics Ltd. Approvals

#2206340

Range of 4 or 6 port manifolds with or without water meter manifolds (see model), all with gunmetal bodies. Models with a water meter manifold incorporate a quarter turn stop valve or screw down stop valve (see model), and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
1 ½” BSP (F) inlet connection.
Marking:
Ebco (brand of Talis UK) and date of manufacture (MM/YY) on body.
Installation Requirements:
R001 R008 R120
Expiry date:
30/06/2027
Model:
4 Port manifold: MANI4. 4 Port manifold with meter manifold connection tails (only): MANI43, MANI44. 4 Port manifold, connection tails and water meter manifold with screw down stop valve: MANI401, MANI402, MANI403, MANI410, MANI411, MANI420. 4 Port manifold, connection tails and water meter manifold with quarter turn stop valve: MANI451, MANI452. 6 Port manifold: MANI6. 6 Port manifold with meter manifold connection tails (only): MANI63, MANI64. 6 Port manifold, connection tails and water meter manifold with screw down stop valve: MANI601, MANI602, MANI603, MANI610, MANI611. 6 Port manifold, connection tails and water meter manifold with quarter turn stop valve: MANI651.
Product Images
Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval

#2303313

Range of screw down stop valves with plastic bodies, EPDM washers and ‘O’ rings. For use with polyethylene pipe (manufactured to EN 12201). The products are supplied with loose pipe inserts. For above and below ground use. Maximum working pressure 16 bar. Cold water use only.

Section:
2320 Valves
Section Subtitle:
Stop, plastic, screw down.
WRAS Approval Number:
2303313
Size:
20mm, 25mm and 32mm pushfit, & ¾” BSP.
Marking:
Talbot, PN, flow arrow, size and water moulded on body.
Installation Requirements:
R001 R120
Expiry date:
31/03/2028
Model:
E5252 - S/COCK WIS 4-23-04 PF 20MM SDR9 S/KEY, E5874 - S/COCK WIS 4-23-04 PF 25MM SDR11S/KEY, E5882 - S/COCK WIS 4-23-04 PF 32MM SDR9 S/KEY, E7616 - S/COCK WIS 4-23-04 PF 20MM S/KEY euro, E7617 - S/COCK WIS 4-23-04 PF 25MM S/KEY euro, E7618 - S/COCK WIS 4-23-04 PF 32MM S/KEY euro, SA2020303AM - S/COCK WIS 4-32-04 FI ¾ IN BSP.
Product Images
Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval

#2301347

Talbot range of gunmetal screw down stop valves for use with MDPE PE80 pipe (manufactured to EN12201). The products are supplied with loose (blue plastic) pipe inserts. Maximum working pressure 16.0 bar. Cold water use only.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2301347
Size:
20mm - 63mm push fit end connections.
Marking:
Talbot (brand of Atlantic Plastics Ltd), flow arrow, size, BS5433 and casting date (MM/YY) on body.
Installation Requirements:
R001
Expiry date:
31/01/2028
Proviso:
The supplied pipe inserts must be installed with these fittings.
Model:
E2988: S/Cock BS5433 PF 20mm SDR9 CR HD GM, E2993: S/Cock BS5433 PF 25mm SDR11 CR HD GM, E2996: S/Cock BS5433 PF 32mm SDR11 CR HD GM, E2998: S/Cock BS5433 PF 50mm SDR11 CR HD GM, E3000: S/Cock BS5433 PF 63mm SDR11 CR HD GM, E2990: S/Cock BS5433 PF 20mm SDR9 5/8IN SQ HD GM, E2995: S/Cock BS5433 PF 25mm SDR11 5/8IN SQ HD GM, E2997: S/Cock BS5433 PF 32mm SDR11 5/8IN SQ HD GM, E10115: S/Cock BS5433 PF 20mm 5/8IN SQ HD GM ‘WSC’, E11377: S/Cock BS5433 PF 25mm 5/8IN SQ HD GM ‘WSC’.
Product Images
Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval

#2303346

Range of single or manifold below ground meter boxes. The boxes incorporate a concentric water meter manifold and a servicing valve on each connection. CV models incorporate an approved single check valve cartridge and the DCV model incorporates two approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The pushfit inlet and outlet connections are supplied with pipe inserts and are for use with MDPE pipe (manufactured to EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
20mm, 25mm, 32mm.
Marking:
Talis, Talbot (brand of Atlantic Plastics Ltd), batch clock and recycle code on body.
Installation Requirements:
R001
Expiry date:
31/03/2028
Model:
Matrix Manifold (CV) with PF inlet and outlet, Matrix Manifold (DCV) with PF inlet and outlet, Matrix Manifold (CV) 4 inlets x 4 outlets 25mm, Matrix Manifold (CV) 6 inlets x 6 outlets 25mm.
Product Images
Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval

#2304325

Talbot Modular Manifold System with and without concentric water meter connections with plastic bodies incorporating screw down stopvalves. Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
see model
Marking:
Talbot (brand of Atlantic Plastics Ltd.) on manifold body.
Installation Requirements:
R001 R120
Expiry date:
30/04/2028
Model:
2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet and concentric connection x 25mm PE outlet E3707, MANIF 2 PF 50 X 25MM E3708, MANIF 3 PF 50 X 25MM E3709, MANIF 4 PF 50 X 25MM E3710, MANIF 5 PF 50 X 25MM E3711, MANIF 6 PF 50 X 25MM E3712, MANIF 7 PF 50 X 25MM E3713, MANIF 8 PF 50 X 25MM E3714 MANIF 9 PF 50 X 25MM E3715, MANIF 10 PF 50 X 25MM E3716, MANIF 11 PF 50 X 25MM E3717 MANIF 12 PF 50 X 25MM E3718, MANIF 2 PF 63 X 25MM E3719, MANIF 3 PF 63 X 25MM E3720, MANIF 4 PF 63 X 25MM E3721 MANIF 5 PF 63 X 25MM E3722, MANIF 6 PF 63 X 25MM E3723, MANIF 7 PF 63 X 25MM E3724, MANIF 8 PF 63 X 25MM E3725 MANIF 9 PF 63 X 25MM E3726, MANIF 10 PF 63 X 25MM E3727, MANIF 11 PF 63 X 25MM E3728 MANIF 12 PF 63 X 25MM Talbot Modular Manifold System 2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet x ¾” BSP; 25mm outlets E3751 MANIF 2 PF 50 X 25MM E3752 MANIF 3 PF 50 X 25MM E3753 MANIF 4 PF 50 X 25MM E3754 MANIF 5 PF 50 X 25MM E3755 MANIF 6 PF 50 X 25MM E3756 MANIF 7 PF 50 X 25MM E3757 MANIF 8 PF 50 X 25MM E3758 MANIF 9 PF 50 X 25MM E3759 MANIF 10 PF 50 X 25MM E3760 MANIF 11 PF 50 X 25MM E3761 MANIF 12 PF 50 X 25MM E3762 MANIF 2 PF 63 X 25MM E3763 MANIF 3 PF 63 X 25MM E3764 MANIF 4 PF 63 X 25MM E3765 MANIF 5 PF 63 X 25MM E3766 MANIF 6 PF 63 X 25MM E3767 MANIF 7 PF 63 X 25MM E3768 MANIF 8 PF 63 X 25MM E3769 MANIF 9 PF 63 X 25MM E3770 MANIF 10 PF 63 X 25MM E3771 MANIF 11 PF 63 X 25MM E3772 MANIF 12 PF 63 X 25MM
Product Images
Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 3 of 6

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.