Washing Machines

Section Code 2390 : Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

Back To Directory Sections

#2003381

Range of pass through commercial dishwashing machines (with a water softener - RA models, or without - R models). Flow is controlled by a solenoid valve, which incorporates a flow restrictor and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). . The water softener (where fitted) is located downstream of the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2003381
Expiry date:
31/03/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
¾” BSP (F) captive nut (to inlet hose).
Marking:
Comenda prime on front casing. Comenda, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
Installation Requirements:
R001 R009 R520 R574
Model:
PC07 R, PC07 RA, PC09 R, PC09 RA, PC12 R, PC12 RA, HC10 R, HC10 RA, HC14 R, HC14 RA, PCXL R, PCXL RA, HCXL R & HCXL R.
Manufacturer:
COMENDA ALI GROUP SRL
Company Name
COMENDA ALI GROUP SRL
Address
VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN
Country
ITALY

View All Listings by this Company

Print This Approval


#2001121

Range of commercial dishwashers, glass washers and washer disinfectors, with solenoid valves incorporating a plastic strainer and plastic flow regulator controlling the flow and discharging via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5), one on the cold water supply and hot water supply lines to the washing system and another as part of the steam condenser circuit (applicable models). The appliances are available with or without a water softener (ion exchange), steam condenser and additional water supply. The products are supplied with ¾” BSP (F) x ¾” BSP (M) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet and optional ¾” BSP (M) x ¾” BSP (F) in-line strainers (incorporating a stainless steel mesh) to be installed after the double check valve assembly. Models with a steam condenser circuit include a ‘Y’-piece connector ¾” BSP (F) inlet x ¾” BSP (M) outlets to install after the double check valve or filter (if fitted) prior to the inlet hoses. Maximum working pressure 10.0 Bar. Maximum operating temperature of product and hot supply 60°C. All other inlets are cold supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2001121
Expiry date:
31/01/2025
Note:
These appliances incorporate Fluid Category 5 backflow protection. The double check valves supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. Discharge to drain must be via a type AA, AB or AD air gap or in accordance with EN1717.
Size:
¾” BSP captive nut (supply hose)
Marking:
W & H ON CONTROL PANEL MODEL, PRODUCT INFORMATION ON LABEL ON REAR PANEL & INSIDE OF DOOR
Installation Requirements:
R001 R574
Model:
RID 100 & RID 200
Factor:
W&H Sterilization Srl
Company Name
W&H Sterilization Srl

View All Listings by this Company

Print This Approval


#2004006

Range of hood type and undercounter commercial dishwashing machines, flow is controlled by a solenoid valve which incorporates plastic flow regulator and discharges via a Type ‘AB’ air gap (suitable for backflow protection against fluid category 5). The products are supplied with a dual layer PVC supply hose (grey outer/black inner). Maximum working pressure 3.0 Bar. Cold supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2004006
Expiry date:
30/04/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention arrangement. The plastic flow regulator supplied with the solenoid must be installed to maintain the validity of this approval.
Size:
¾” BSP captive nut (Inlet hose)
Marking:
Mach on front panel. Mach, model and operating info on right side panel.
Installation Requirements:
R001
Model:
Under counter dishwasher, single skinned: MS 9451 BT, MS 9453 BT, EASY 50 BT, EASY 53 BT. Under counter dishwasher, double skinned: MS 9550T BT, MS 9551 BT, MS 9553 BT, MS 9850T BT, MS 9851 BT, MS 9853A BT. Hood-type dishwasher: MS 9100 BT, MS 9120 BT, MS 9120A BT, EASY 90 BT, MS 9600A BT.
Manufacturer:
Mach Spa
Company Name
Mach Spa
Address
Via Maggior Piovesana 154 31015 Coneglio (TV) Italy

View All Listings by this Company

Print This Approval


#2004355

Range of front loading dishwashing machines (with a water softener - RA models, or without - R models). Flow is controlled by a solenoid valve, which incorporates a flow restrictor (5.5 lpm) and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The water softener (where supplied) is located after the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2004355
Expiry date:
30/04/2025
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
¾” BSP (F) captive nut (to inlet hose).
Marking:
Comenda prime on front casing. Comenda, manufacturers address, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
Installation Requirements:
R001 R009 R520 R574
Model:
PF45 R, PF45 RA, HF45 R, HF45 RA, HB35 R, HB35 RA, HB34-R, PB34-R, PF46-R & PF46-RA.
Manufacturer:
COMENDA ALI GROUP SRL
Company Name
COMENDA ALI GROUP SRL
Address
VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN
Country
ITALY

View All Listings by this Company

Print This Approval


#2006353

Range of hood type or undercounter commercial dishwashers. Flow is controlled by a solenoid valve which discharges via a type ‘AA’ air gap. Maximum working pressure 10.0 Bar. Cold water supply only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2006353
Expiry date:
30/06/2025
Size:
¾” BSP (M)
Marking:
Inoksan & name on face label. Model, Inoksan and other technical information on side panel.
Installation Requirements:
R001
Model:
BYM 102 ST (hood type) BYM 052S-W (undercounter)
Factor:
Shorrock Trichem Ltd
Company Name
Shorrock Trichem Ltd
Address
Chanters Ind Est Tyldesley Old Road Atherton
Postcode
M46 9SD
Country
Greater Manchester

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.