COMENDA ALI GROUP SRL Approvals


WRAS Approval Number: 2003381

Range of pass through commercial dishwashing machines (with a water softener - RA models, or without - R models). Flow is controlled by a solenoid valve, which incorporates a flow restrictor and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). . The water softener (where fitted) is located downstream of the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

  • Section: 2390 Washing Machines
  • Section Subtitle: Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
  • WRAS Approval Number: 2003381
  • Expiry date: 31/03/2025
  • Note: This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
  • Size: ¾” BSP (F) captive nut (to inlet hose).
  • Marking: Comenda prime on front casing. Comenda, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
  • Installation Requirements R001 R009 R520 R574
  • Model
    PC07 R, PC07 RA, PC09 R, PC09 RA, PC12 R, PC12 RA, HC10 R, HC10 RA, HC14 R, HC14 RA, PCXL R, PCXL RA, HCXL R & HCXL R.
  • Manufacturer: COMENDA ALI GROUP SRL
    Company Name
    COMENDA ALI GROUP SRL
    Address
    VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004355

Range of front loading dishwashing machines (with a water softener - RA models, or without - R models). Flow is controlled by a solenoid valve, which incorporates a flow restrictor (5.5 lpm) and a strainer, and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The water softener (where supplied) is located after the ‘AB’ air gap. The product is supplied with a grey nylon braided EPDM lined flexible hose assembly with ¾” captive nut end connections incorporating EPDM washers. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

  • Section: 2390 Washing Machines
  • Section Subtitle: Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
  • WRAS Approval Number: 2004355
  • Expiry date: 30/04/2025
  • Note: This appliance incorporates a Fluid Category 5 backflow prevention device. Claims for flow rate are made by the manufacturer and not considered part of the listing.
  • Size: ¾” BSP (F) captive nut (to inlet hose).
  • Marking: Comenda prime on front casing. Comenda, manufacturers address, model, serial no., which includes date of manufacture (MMYY) as the final four digits and other technical information on adhesive label on side of unit.
  • Installation Requirements R001 R009 R520 R574
  • Model
    PF45 R, PF45 RA, HF45 R, HF45 RA, HB35 R, HB35 RA, HB34-R, PB34-R, PF46-R & PF46-RA.
  • Manufacturer: COMENDA ALI GROUP SRL
    Company Name
    COMENDA ALI GROUP SRL
    Address
    VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006301

Range of floor standing commercial glass washers incorporating a solenoid valve controlling the flow. The product is supplied with a double check valve assembly (suitable for backflow protection against fluid category 3). Maximum working pressure 4.0 Bar. Maximum operating temperature 60°C.

  • Section: 1310 Glass/Bottle Washers
  • WRAS Approval Number: 2006301
  • Expiry date: 30/06/2025
  • Size: ¾” BSP Captive nut
  • Marking: Comenda and Comenda logo on face. Coemnda and Comenda logo, pressure and other technical information on side panel.
  • Installation Requirements R001 R160
  • Model
    PB24, PB24 A, PB34, PB34 A, HB24, HB24 A, HB34 & HB34 A Where A denotes the inclusion of a softener.
  • Manufacturer: COMENDA ALI GROUP SRL
    Company Name
    COMENDA ALI GROUP SRL
    Address
    VIA GALILEO GALILEI, 8 20060 CASSINA DE PECCHI MILAN
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1