Valves

Section Code 2240 : Solenoid, plastic.

Back To Directory Sections

#1903093

‘R Series, R Series Mini, R Series Dispenser, R Series Dual, R Series Universal & R Series Modular’ ranges of normally closed, normally open or latching solenoid valves with off-white nylon bodies, incorporating either NBR or silicone diaphragms with POM diaphragm inserts (only). The inlet or outlet can incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet can also incorporate a plastic flow restrictor. The inlet can also incorporate a plastic strainer or a plastic flow regulator. (This option is not available on the push fit (quick coupling) sizes added September 2020). ‘R Series’ models are available as either in-line or at a 90° angle (hose tail outlet models only), except for ‘R series modular’ models added July 2019 which are only available at a 90° angle. From January 2020 models are available with the RF flow meter. From November 2020 models are available with the RV filters, which are stainless steel filters with nylon bodies to be mounted on every Serie R model body in place of the solenoid. Models with a push fit (quick coupling) connection added September 2020 are for use with LLDPE pipe (all sizes), or PEX pipe (manufactured to BS7291-3) (10mm & 15mm sizes only). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C, except for models fitted with a flow meter or Series R filter which are cold water use only.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
1903093
Expiry date:
31/03/2024
Note:
The LLDPE and PEX pipe referred to within the description are not provided or considered covered under the scope of this approval. Each must be sourced separately by the installer. Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
R series and R series Mini: Inlet sizes available in: ½” or ¾” BSP (M or F), ¼” BSP (M), ⅛” BSP (F). Outlet sizes available in: ⅜”, ½” & ¾” BSP (M or F), ¼” BSP (M), ⅛” BSP (F), 10mm & 13mm hose tail, 10mm spigot. Models added June 2019 - R Series Dispenser & Dual: M10, double or triple inlet ¼” BSP (M), single outlet ¾” BSP (M), 10mm hose tail, 6mm/10mm spigot inlet/outlet. Model added July 2019 - R Series Universal & Modular: R Series Universal models: 18mm inlet/outlet bayonet connections. R Series Modular models: ¾” BSP (M) inlet x 10mm hose tail outlet. Sizes added September 2020 (all models): Push fit (Quick coupling) ¼”, ⅜”, 6mm, 8mm, 10mm or 15mm.
Marking:
R series, R series Mini, R Series Dispenser, R Series Dual family and Universal models: R.P.E., flow arrow & operating info on body. R Series Modular models: R.P.E. logo, flow arrow on body. Serie R and operating info on coil. From January 2020 models that include a flow meter (RF): Products may also be marked with date of manufacture (dial type) on the flow meter. From November 2020 models that include a R Series Filter: Products may also be marked with RPE on filter cap.
Installation Requirements:
R001 R008
Model:
R Series: Single (1 inlet, 1 outlet), Double (1 inlet, 2 outlets), Triple (1 inlet, 3 outlets), Quadruple (1 inlet, 4 outlets) & Mini (1 inlet, 1 outlet). Models added June 2019: R Series Dispenser family (2 or 3 inlets, 1 outlet). R series Dual family (1 or 2 inlet(s), 1 outlet). Model added July 2019: R Series Universal: Universal body A (straight controlled water flow, 1 outlet). Universal body B (2 outlets, a straight free flow and left controlled flow). Universal body C (2 outlets, a straight free flow and a right controlled flow). Universal body D (Straight free flow, no control). R Series Modular: RM1100 (1 inlet, 1 angled outlet), RM1200 (1 inlet, 2 angled outlets), RM1300 (1 inlet, 3 angled outlets). Models added January 2020: ‘Flow meter (RF)’ option: Flow rate 0.1-3.6 l/min Flow rate 0.5-7 l/min Flow rate 1-15 l/min Flow rate 5-30 l/min Which can be included on any of the R Series models on this approval. Please note that the flow meter replaces a solenoid, as a result R Series models that only include one solenoid become standalone flow meters. Flow meter models are denoted by a RF suffix to the R series model name, e.g. R Series Single ½” x ½” RF. Models added November 2020: ‘Filter (RV)’ option: R Serie Filter 131 μ (114 mesh). R Serie Filter 168 μ (86 mesh). R Serie Filter 237 μ (64 mesh). R Serie Filter 307 μ (49 mesh). Which can be included on any of the R Series models on this approval. Please note that the filter replaces a solenoid, as a result R Series models that only include one solenoid become standalone filters.
Manufacturer:
R.P.E. Srl.
Company Name
R.P.E. Srl.
Address
Via S. Abrogio, 1,3,5 22070 Carbonate (CO) Italy
Phone
+39 0331.832515

View All Listings by this Company

Print This Approval


#1904308

Range of servo-controlled and normally closed (NC) solenoid valves with various plastic bodies and various inlet / outlet options. Inlets incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
1904308
Expiry date:
30/04/2024
Size:
See model
Marking:
AUK Muller on adhesive label on coil.
Installation Requirements:
R001 R008
Model:
DN7 Models: 1.007.111 - ½” BSP (M) 1.007.111 - ⅜” BSP (M) 1.007.111 - ¾” BSP (M) 1.007.126 - ½” BSP (M) 1.007.126 - ⅜” BSP (M) 1.007.126 - ¾” BSP (M) 1.007.126 - JG 3/8 cartridge 1.007.126 - G 3/4 swivel 44.007.126 - ½” BSP (M) 44.007.126 - ¾” BSP (M) 29.007.215 - ½” BSP (M) 29.007.215 - ⅜” BSP (M) 29.007.215 - ¾” BSP (M). DN10 Models: 1.010.115 - ½” BSP (M) 1.010.115 - ¾” BSP (M) 1.010.125 - ¾” BSP (M) 1.010.126 - ½” BSP (M) 1.010.126 - ⅜” BSP (M) 1.010.126 - ¾” BSP (M) 1.010.126 - JG 1/2 cartridge 1.010.126 - JG 3/8 cartridge 1.010.126 - G 3/4 swivel 1.010.126 - ½” BSP (F) 1.010.215 - ¾” BSP (M) 1.010.216 - ¾” BSP (M) 1.010.225 - ¾” BSP (M) 1.010.315 - ¾” BSP (M) 1.010.325 - ¾” BSP (M) 1.010.415 - ¾” BSP (M) 1.010.425 - ¾” BSP (M) 29.010.226 - ⅜” BSP (M) 29.010.226 - ¾” BSP (M) 29.010.326 - ¾” BSP (M) DN13 Models: 1.013.115 - ¾” BSP (M) 1.013.126 - ½” BSP (M) 1.013.126 - ¾” BSP (M) 1.013.126 - G 3/4 swivel 1.013.215 - ¾” BSP (M) 1.013.225 - ¾” BSP (M) DN17 Models: 1.017.115 - ¾” BSP (M) 1.017.126 - ¾” BSP (M) 15.017.325 - ¾” BSP (M) 15.017.425 - ¾” BSP (M) 1.021.126 - 1” BSP (M)
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0

View All Listings by this Company

Print This Approval


#1906006

Range of solenoid valves with plastic bodies and silicone diaphragms. The outlets incorporate a plastic flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
1906006
Expiry date:
30/06/2024
Size:
¾” BSP (M), ½” BSP (M) & 3/8” BSP (M)
Marking:
RPE logo, flow arrow and date of manufacture (clock format) on body.
Installation Requirements:
R001 R008
Model:
R series R192, R195, R196, R197
Factor:
R.P.E. Srl.
Company Name
R.P.E. Srl.
Address
Via S. Abrogio, 1,3,5 22070 Carbonate (CO) Italy
Phone
+39 0331.832515

View All Listings by this Company

Print This Approval


#1906011

Solenoid valve with plastic body and silicone rubber diaphragm. Maximum working pressure 0.03 bar. Maximum operating temperature 65°C

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
1906011
Expiry date:
30/06/2024
Size:
13mm spigot connection
Marking:
Deltrol controls, model, date of manufacture (YY/WW) and technical info on adhesive label on coil
Installation Requirements:
R001 R008
Model:
DSVP11N - 14PX - 8SR
Factor:
Deltrol Controls (USA)
Company Name
Deltrol Controls (USA)
Address
2740 So. 20th Street Milwaukee WI 53215
Country
United States

View All Listings by this Company

Print This Approval


#1904360

Servo assisted, normally closed solenoid valve with a plastic body and EPDM membrane. The inlet incorporates a stainless-steel strainer. Maximum working pressure 10 bar. Cold water use only

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
1904360
Expiry date:
30/04/2024
Size:
3/8” BSP(F) inlet x 6mm spigot outlet
Marking:
AuK Muller, voltage, medium and ambient temperature, model number, identification code and production date (WW/YY) on adhesive label on coil
Installation Requirements:
R001 R008
Model:
1_007_115
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0

View All Listings by this Company

Print This Approval


#2004052

Ranges of solenoid valves with plastic bodies, incorporating EPDM ‘O’-rings and diaphragms. Models also incorporate a plastic flow regulator. Maximum working pressure 10.0 bar. Cold water use only. From September 2020, the maximum operating temperature is 90.0°C

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2004052
Expiry date:
30/04/2025
Size:
See Model
Marking:
Robertshaw, ENEC and other technical info on metal housing.
Installation Requirements:
R001 R008
Model:
VAI FC series: 3/8”, ½”, ¾” BSP (M) inlet & outlet. SAD-E FC series: ¾” BSP (M) inlet x 10mm spigot outlet. ASD FC series: ¾” BSP (M) inlet x 10mm spigot outlet. V18, V19, V28, V29, V38, V39, V48 & V58 series: ¾” BSP (M) inlet x 10mm or 13mm spigot outlet.
Manufacturer:
Robertshaw S.R.L.
Company Name
Robertshaw S.R.L.
Address
Via Giacomo Matteotti, 62 Cinisello Balsamo, 20092 Milano
Country
Italy

View All Listings by this Company

Print This Approval


#2007365

Range of normally closed (monostable) and pulse controlled/latching (bistable) solenoid valves with plastic bodies, integral stainless steel strainer, From September 2023 the 50.005.101 model can also be supplied with an integral plastic strainer. EPDM diaphragm, EPDM ‘O’-rings and seals. To be installed in specifically dimensioned bodies. The 50.005.101 model can be supplied with or without a brass adaptor. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2007365
Expiry date:
31/07/2025
Note:
The 19.00x.287 model is not approved in its own right.
Size:
See model
Marking:
A.u.K. Müller, size, pressure and technical information on adhesive label on body.
Installation Requirements:
R001 R008
Model:
50.005.101: M22x2. thread on valve housing 50.009.101: M29x1.5 thread on valve housing. Both models utilise model 19.00x.287 as a pilot valve for the servo controlled part
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0

View All Listings by this Company

Print This Approval


#2011023

Normally closed solenoid valve with a plastic body and EPDM diaphragm. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2011023
Expiry date:
30/11/2025
Size:
1/8” BSP (F)
Marking:
ODE, size and technical information on body.
Installation Requirements:
R001
Model:
21JP1R1E23-WRT0
Manufacturer:
ODE S.r.l.
Company Name
ODE S.r.l.
Address

View All Listings by this Company

Print This Approval


#2009330

Range of plastic bodied normally closed latching solenoid valves. The 42424000 model is supplied with an additional brass housing. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2009330
Expiry date:
30/09/2025
Size:
See model
Marking:
Grohe, product no., ident code and production date (WW/YY) on adhesive label on body.
Installation Requirements:
R001 R008
Model:
42424000: 8.50mm ID Manifold 42399000: M22x1
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval


#2012013

Non latching solenoid valve with a plastic body and an EPDM gasket and ‘O’-ring. Maximum working pressure 8.0 bar. Cold water use only.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2012013
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
Kangleda on bracket on solenoid .
Installation Requirements:
R001 R008
Model:
FCD.3
Manufacturer:
Zhejiang Kangleda New Energy Co., Ltd.
Company Name
Zhejiang Kangleda New Energy Co., Ltd.
Postcode
CHINA

View All Listings by this Company

Print This Approval


#2101039

Solenoid valves with a plastic body and silicone diaphragm and ‘O’ rings. Maximum working pressure 8.0 bar. Cold water use only.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2101039
Expiry date:
31/01/2026
Size:
½” BSP (M)
Marking:
CEME, model and date of manufacture (DD/MM/YYYY) on adhesive label on body.
Installation Requirements:
R001 R008
Model:
Series L L40050LSP00L6V & L50050LSP00L6V.
Factor:
Ceme SpA
Company Name
Ceme SpA
Address
Viale Dell Industria 5 27020 Trivolizio (PV) Italy

View All Listings by this Company
Manufacturer:
Deca Srl.
Company Name
Deca Srl.
Address

View All Listings by this Company

Print This Approval


#2012360

Range of normally closed solenoid valves with a plastic body and silicone rubber diaphragm & ‘O’-rings. Models ending ‘007’ have a maximum working pressure of 0.25 bar. All other models have a maximum working pressure of 0.06 bar. Maximum operating temperature 90°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2012360
Expiry date:
31/12/2025
Size:
12mm O.D. x 10.07mm O.D. spigot. 15.04mm O.D. x 15.08mm O.D. spigot. 18.98mm O.D. x 17mm O.D. spigot.
Marking:
A.u.K Müller, model type, date of manufacture (WW/YY) and other technical information on coil. A.u.K Müller logo on body.
Installation Requirements:
R001 R008
Model:
40.006.111. 40.008.111. 40.012.111. 46.006.111. 46.008.111. 40.006.114. 40.008.114. 46.006.114. 46.008.114. 40.006.116. 40.008.116. 46.006.116. 46.008.116. 40.006.117. 40.008.117. 46.006.117. 46.008.117. 46.008.118. 40.008.101. 40.012.101. 46.008.101. 40.008.151. 46.008.151. 40.012.151. 40.008.104. 46.008.104. 40.008.154. 46.008.154. 40.012.191. 40.014.111. Where: 40 = solenoid type, either MS.026 for 40.006/008.XXX models, or MS.006 for 40.012/014.XXX models. 46 = solenoid type, MS.006. 006-012 = Orifice size in mm (DN) of valve seat, e.g. 006 = 6mm. 1st X = number of valves in a row: 1 for 40.012/014.XXX models, 1-5 for all other models. 2nd x = PTFE Valve seat: 0 = No, 1 = Yes, 5 = valve with regulated breather and PTFE seat, 9 = solenoid operated with pulsed voltage and PTFE seat (start with Un and then pulsed to reduce power consumption) 3rd X = Speciality: 1 = Valve housing and outlet moulded in one piece, 4 = Valve housing with detachable outlet, 6 = Banking valve with detachable outlet, 7 = Banking valve with valve housing and outlet moulded in one piece, 8 = Single chamber valve with special inlet and membrane. Example code: 46.008.114 = MS.006 type, single chamber solenoid valve with DN 8 valve seat orifice, PTFE valve seat and detachable outlet.
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0

View All Listings by this Company

Print This Approval


#2101053

Range of bistable (all models) or monostable/normally closed (19.00x.287 only) solenoid valves with either a plastic body (19.00X.287) or plastic internal body with stainless steel threaded casing (50.005.102 and 50.005.(050) models) with EPDM diaphragms and ‘O’-rings. Maximum working pressures: 50.005.(050) model: 8.0 bar. All other models: 10.0 bar. Maximum operating temperature 70°C

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2101053
Expiry date:
31/01/2026
Size:
Please refer to model.
Marking:
A. u. K. Müller, model number, manufacturing date (WW/YY) & technical information on adhesive label on body.
Installation Requirements:
R001 R008
Model:
50.005.(050): M20. 50.005.102: M20. 19.00X.287: OD 7.5mm.
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0

View All Listings by this Company

Print This Approval


#2103020

Solenoid valve with plastic body and silicone rubber diaphragm. Maximum working pressure 0.18 Bar. Cold water use only.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2103020
Expiry date:
31/03/2026
Size:
15.9mm Hose spigot connection (inlet and outlet).
Marking:
Deltrol Controls, model, DoM (YYWW) and other technical information on adhesive label on body. Deltrol control and flow arrow on body.
Installation Requirements:
R001
Model:
DSVP12N-2LSXH-240M
Factor:
Deltrol Controls (USA)
Company Name
Deltrol Controls (USA)
Address
2740 So. 20th Street Milwaukee WI 53215
Country
United States

View All Listings by this Company
Manufacturer:
Deltrol Controls (Vietman)
Company Name
Deltrol Controls (Vietman)
Address
29 Street 2 Vietman Singapore Ind Park Thuan An Town Binh Duong Province Vietnam 72000

View All Listings by this Company

Print This Approval


#2104329

Range of solenoid valves with plastic bodies and EPDM diaphragms. The inlet incorporates a plastic strainer and an integrated flow meter sensor. Both the inlet and the outlet incorporate a white plastic flow restrictor. The products are also supplied with an optional EPDM outlet gasket, for installation over the outlet spigot. Maximum working pressure 10.0 bar (to diaphragm). Maximum operating temperature 85°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2104329
Expiry date:
30/04/2026
Note:
Open outlet use only.
Size:
See model.
Marking:
TP Reflex logo, model no, pressure range and flow arrow on body.
Installation Requirements:
R001 R008
Model:
¾” BSP (M) inlet/10.27mm spigot outlet: ES90/88. ES180/88. ESL 90/88-M. ¾” BSP (M) inlet/10.27mm double outlet: ED90/88. ED180/88. EDL90/88-L. ED180/88-L. ED180/88-FM. EDL90/88–M. ¾” BSP (M) inlet/10.27mm triple spigot outlet: ET90/88. ET180/88. ETL90/88-M. 23.64mm manifold inlet/9.10mm spigot outlet: 1ES-L. ¾” BSP (M) inlet/10.27mm quadruple spigot outlet EQL90/88-L: ¾” NPT (M) double inlet/12.81mm spigot outlet: EM180/88.
Factor:
TP Reflex Group S.p.A
Company Name
TP Reflex Group S.p.A
Address
Via Brescia 8, Tradate (VA)
Country
Italy
Phone
0331 816611
General Email
info@tp-spa.com

View All Listings by this Company
Manufacturer:
TP Reflex Polska Sp. zo.o & TP Reflex Group S.p.A (Italy)
Company Name
TP Reflex Polska Sp. zo.o & TP Reflex Group S.p.A (Italy)
Address
General Email

View All Listings by this Company

Print This Approval


#2103317

Range of plastic bodied solenoid valves incorporating a stainless steel spring and armature with an EPDM diaphragm. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2103317
Expiry date:
31/03/2026
Size:
1/4” BSP (F) inlet/outlet.
Marking:
Robertshaw, model and other technical information on coil. Direction of flow arrow on body.
Installation Requirements:
R001 R008
Model:
126F9001 (SF9001)
Manufacturer:
Robertshaw (China) Controls Company Limited
Company Name
Robertshaw (China) Controls Company Limited
Address
No 16-7 Xianshan East Road, Qingdao Electronic Information Industrial Park, Chengyang District
Country
China

View All Listings by this Company

Print This Approval


#2012081

Range of normally closed and normally open plastic solenoid valves with EPDM ‘O’-rings and sealing rings. Pushfit connections for use with John Guest LLDPE pipe or copper pipe. The 47.004.103 model acts as a diverter between two outlets, where one outlet is always open. Maximum working pressures see model section. Maximum operating temperatures: 65°C - 47.00X.1XX models with John Guest LLDPE pipe only. 90°C - 47.004.103 model with John Guest LLDPE pipe only. Models added January 2021: Cold water use only - 47.00X.2XX (4mm & 8mm) with John Guest LLDPE pipe only. 90°C - 47.00X.2XX (6mm) with John Guest LLDPE pipe only. 90°C - 47.00X.2XX (6mm & 8mm) with copper pipe only.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2012081
Expiry date:
31/12/2025
Size:
See model.
Marking:
AUK Muller, technical information and date of manufacture (WWYY) on adhesive label on body.
Installation Requirements:
R001 R008
Model:
47.002.102 (NC - Normally Closed): 6mm pushfit - 8.0 bar. 47.002.102 (NC - Normally Closed): 8mm pushfit - 8.0 bar. 47.002.182 (NO - Normally Open): 8mm pushfit - 7.0 bar. 47.004.102 (NC - Normally Closed): 6mm pushfit - 3.5 bar. 47.004.102 (NC - Normally Closed): 8mm pushfit - 3.5 bar. 47.004.103 (NC - Normally Closed) 3/2 Way: Nozzle 7mm - 3.5 bar. Models added January 2021: 47.002.202 (NC - Normally Closed): 8mm pushfit - 8.0 bar. 47.003.202 (NC - Normally Closed): 8mm pushfit - 5.0 bar. 47.003.203 (NC - Normally Closed): 4mm pushfit - 5.0 bar. 47.003.203 (NC - Normally Closed): 6mm pushfit - 3.0 bar. 47.003.203 (NC - Normally Closed): 8mm pushfit - 3.0 bar. 47.004.202 (NC - Normally Closed): 6mm pushfit - 3.0 bar. 47.004.202 (NC - Normally Closed): 8mm pushfit - 3.5 bar. 47.004.282 (NO - Normally Open): 6mm pushfit - 3.0 bar. 47.004.203 (NC - Normally Closed): 6mm pushfit - 3.0 bar. 47.004.203 (NC - Normally Closed): 8mm pushfit - 3.0 bar.
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0

View All Listings by this Company

Print This Approval


#2109352

Aquatsop leak detection system intended to shut the water supply in the event of a water leak. Consisting of two single normally closed servo controlled solenoid valves with a flow regulator and stainless steel filter at the inlet. A LDPE inner hose with corrugated plastic outer hose. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2109352
Expiry date:
30/09/2026
Note:
This product has not been tested or approved for leak detection or anti-flooding claims made by the approval holder.
Size:
¾” BSP(F) plastic inlet nut with 10mm ID hose outlet.
Marking:
A.u.K Muller, voltage, temp, model type and date of manufacture (WW/YY).
Installation Requirements:
R001 R008
Model:
Aquastop 13.007.226
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0

View All Listings by this Company

Print This Approval


#2110013

Range of latching and normally closed (see model) solenoid valves with plastic bodies, NBR diaphragms and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2110013
Expiry date:
31/10/2026
Size:
M24 (M)
Marking:
Serie Micro, RPE website, minimum and maximum working pressure, and technical specifications on top of valve body.
Installation Requirements:
R001 R008
Model:
MICRO Series: Latching - 3, 4.5 & 6V Normally Closed - 12V.
Factor:
R.P.E. Srl.
Company Name
R.P.E. Srl.
Address
Via S. Abrogio, 1,3,5 22070 Carbonate (CO) Italy
Phone
+39 0331.832515

View All Listings by this Company

Print This Approval


#2112328

Solenoid valve incorporating a plastic body and an EPDM diaphragm. The product incorporates a plastic flow regulator with an EPDM washer, and a plastic filter on the inlet. Maximum working pressure 10.0bar. Maximum operating temperature 60°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2112328
Expiry date:
31/12/2026
Size:
¾” BSP (M) inlet x 12mm spigot outlet.
Marking:
Robertshaw and ENEC on adhesive label on coil. Flow arrow, and PN on body.
Installation Requirements:
R001 R008
Model:
127F019.
Manufacturer:
Robertshaw (China) Controls Company Limited
Company Name
Robertshaw (China) Controls Company Limited
Address
No 16-7 Xianshan East Road, Qingdao Electronic Information Industrial Park, Chengyang District
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.