Section Code 2210 : Pressure relief.
Back To Directory SectionsRange of pressure relief valves with plastic bodies and EPDM diaphragms and ‘O’-rings, Factory pre-set at 3.0 bar. Maximum operating temperature 110°C.
Pressure relief valve (pre-set at between 2.5 & 8.0 bar depending on model), with a plastic body and EPDM shutter membrane. Maximum operating temperature 100°C
`MSL & MSV` ranges of pre-set pressure relief valves with brass bodies and EPDM seats with manually operated easing gear. Maximum working pressure 10 bar. Maximum operating temperature 100°C.
Range of pressure relief valves with DZR brass bodies incorporating EPDM diaphragms. The valves are pre-set at 6.0 bar (311560, 312469, 312461ITH & 311461 models), 10.0 bar (312020 CST model) and 7.0 bar (312471 model). Maximum operating temperature 99°C.
Pressure relief valve (pre-set at between 2.5 & 8.0 bar depending on model), with a brass body and EPDM shutter membrane. Maximum operating temperature 100°C.
Range pressure relief valves incorporating DZR brass bodies and EPDM rubber washers. For pressures these are set at please consult the model section. The valves incorporate a manually operated rotational easing gear. Maximum operating temperature of 99°C.
Range pressure relief valves incorporating DZR brass bodies and EPDM rubber washers. For pressures these are set at please consult the model section. The valves incorporate a manually operated rotational easing gear. Maximum operating temperature of 99°C.
Range of DZR brass expansion relief valves fitted within a manifold assembly. The valves are pre-set at 8.0 bar or 6.0 bar depending on model and incorporate and EPDM membrane, NBR ‘O’-rings. Product incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Cold water use only.
Range of pre-set pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm, (for pre-set pressures see model). The valve is fitted with hand operated rotating easing gear. Maximum working pressure is the same as the pre-set pressure (see model). Maximum operating temperature 85°C.
Range of pre-set pressure relief valves with gunmetal bodies, silicon diaphragms, and PTFE seat washers. Pre-set relief pressures: 0.3 bar to 10.5 bar. Maximum operating temperature 95°C.
Pressure relief valve (pre-set at 3.0 bar) with a brass body. The valve incorporates a manually operated easing gear. Maximum operating temperature 110°C.
Range of pressure relief valves with gunmetal bodies, silicon rubber diaphragm, chrome vanadium steel spring and a lever operated easing gear. Pre-set relief pressures: DN15-25 - 1.0 bar to 12.5 bar. DN32-65 - 0.4 bar to 12.5 bar. Maximum operating temperature 95˚C
Range of pre-set (at 3.0 bar) pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm. The valve is fitted with hand operated rotating easing gear. Maximum operating temperature 85°C.
Range of pressure relief valves incorporating brass bodies and EPDM rubber washers. The valves incorporate a manually operated rotational easing gear. For maximum working pressure please refer to model. Maximum operating temperature 99°C.
Pre-set pressure relief valve (set @ 3.0 bar) incorporating a brass body, NBR ‘O’-ring and an EPDM diaphragm. The valve is fitted with a hand operated rotating easing gear. Maximum operating temperature 90°C.
Pre-set pressure relief valve incoporating DZR brass body and manual easing gear. Pre-set 3.0 bar. Maximum operating temperature 85°C.
Range of pressure relief valves incorporating brass bodies and EPDM rubber washers. The valves incorporate a manually operated rotational easing gear. For maximum working pressure please refer to model. Maximum operating temperature 99°C.
Range of pressure relief valves pre-set @ 6.0 bar, incorporating DZR brass bodies, EPDM seal cup and EPDM ‘O’-ring. Maximum operating temperature 99˚C
Range of pre-set, spring loaded, angled pressure relief valves with plastic body and EPDM diaphragm. The valves are fitted with rotary type easing gear . For maximum working pressure please refer to model. Maximum operating temperature 99°C.
Range of pre-set pressure relief valves with bronze bodies and EPDM seating discs. Available with either a manual lever or dome type sealed cap. Pre-set relief pressures: DN15 and DN40 valves: 0.35 bar to 15.9 bar. DN20 valves: 0.35bar to 13.8bar. DN25, DN32 and DN50 valves: 0.35 bar to 12.5 bar. Maximum operating temperature 85°C.
Page 1 of 3
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
