Section Code 2010 : Blending, thermostatic.
Back To Directory SectionsT-type thermostatic blending valve with a thermostatic cartridge controlling the temperature. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of wall mounted, concealed, thermostatic blending valves (brass body) with optional trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ (push to on push to off) headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome or cube type operating members. The inlets incorporate an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, concealed, thermostatic shower blending valves (brass body) and trim sets (chromium plated brass). The flow is controlled to separate shower outlets via independent ‘detent’ headworks. Temperature is controlled independently via a thermostatic cartridge. The trim sets are provided with either dome or cube type operating members. The hot and cold inlets within the valve body each incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model YH3500-4 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating push type operated diverter to shower outlets (shower outlets not supplied). The inlets incorporate stainless steel strainers and an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of wall mounted two-hole, thermostatic blending valves (chromium plated brass) incorporating a non-rising spindle headwork with single lever operating member. Both inlets incorporate a stainless-steel strainer and approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides adequate backflow protection. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic blending valve (chromium plated brass) incorporating stainless steel strainers at the inlets. The flow is controlled by a non-rising headwork with single lever operating member and the temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Supplied with a shower hose and shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating three, push type operated flow control headworks to optional shower outlets with dome or cube type operating members. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate stainless-steel strainers and single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted exposed thermostatic blending valve (chromium plated brass body) incorporating a half turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled via thermostatic cartridge with a manual override button and dome type operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates stainless steel strainers on the inlets of the valve. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted concealed thermostatic blending valves (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models (122323 and 122323V) incorporate a 3-way diverter. Model (122328) incorporate a 2-way diverter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Page 1 of 66
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.