Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #2309035

Range of shower hoses. Model ML-PVC-DCHS01-XX is a PVC hose incorporating EPDM, NBR or Silicone seals. Model ML-SS-SKHS01-XX is a PVC or EPDM lined shower hose incorporating EPDM, NBR or silicone seals with a stainless-steel interlocked outer with (various finishes).

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2309035
Expiry date:: 30/09/2028
Note:: Open outlet use only.
Size:: ½” BSP (F)
Marking:: Milan logo, WRAS and date of manufacture on ferrule (YYYY/MM/DD)
Installation Requirements:: R001
Model:: ML-PVC-DCHS01-XX ML-SS-SKHS01-XX ML-SS-SKHS01-XX XX denotes 01-Golden 02-black 03-Cr-Plated 04-Natural Surface colour and its connectors as below: G1/2, M15X1 ML-PVCDCHS01-XX XX denotes 01-Brushed Gold 02-Silver 03-Black and with connector G1/2”.
Factor:: Ningbo Milan Sanitary Ware Technology Co., Ltd.

Company Name
Ningbo Milan Sanitary Ware Technology Co., Ltd.
Address
West of No. 18, West Industrial Zone 1st Road, Lubu Town, Yuyao City Ningbo,Zhejiang,China

View All Listings by this Company

WRAS Approval Number: #2309310

Range of Stainless steel braided EPDM lined flexible hose assemblies with a variety of brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature: 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2309310
Expiry date:: 30/09/2028
Size:: see model
Marking:: Leading, WRAS, Year of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Model:: LEADING-EPDM-DN8 Available with connections: G3/8(F), G1/2(F), M8x1, M10x1, M12x1, G1/2(M), 15mm LEADING-EPDM-DN10 Available with connections: G3/8(F), G1/2(F), G3/4(F), M10x1, G1/2(M), 15mm LEADING-EPDM-DN13 Available with connections: G1/2(F), G3/4(F), G3/4(M)
Manufacturer:: Zhejiang Leading Plumbing Co., Ltd

Company Name
Zhejiang Leading Plumbing Co., Ltd
Address
No. 550, Jixin Road, Xinqiao, Taizhou, Zhejiang, China

View All Listings by this Company

WRAS Approval Number: #2309025

Qualflex classic range of stainless steel braided EPDM lined flexible hoses incorporating EPDM O-rings. Maximum working pressure at 20°C ,10.0bar and maximum working pressure at 65°C , 6.0bar. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2309025
Expiry date:: 30/09/2028
Size:: See models
Marking:: Qualflex, QWRAS, Pressure, temp and date of manufacture (YYM YY = year code and M = month code, A-Jan, B-Feb etc) on ferrule.
Installation Requirements:: R001
Model:: FH10 – 15mm pushfit x ½” BSP captive nut FH12 – 15mm pushfit x ¾” BSP captive nut FH20 – 22mm pushfit x ¾” BSP captive nut FH15 – 15mm pushfit x 15mm pushfit FH22 – 22mm pushfit x 22mm pushfit FV15 – 15mm pushfit x 15mm pushfit
Manufacturer:: Hydralectric Ltd.

Company Name
Hydralectric Ltd.
Address
5 High Road Byfleet Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200

View All Listings by this Company

WRAS Approval Number: #1909435

Range of stainless-steel braided EPDM lined flexible hoses. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1909435
Expiry date:: 30/09/2024
Note:
Size:: See model
Marking:: Qualflex, QWRAS, date of manufacture (month code and year YY) and operating parameters on ferrule. Models added January 2022: Qualflex, QWRAS and year of manufacture (YY) on ferrule.
Installation Requirements:: R001 R008
Model:: HOSE900001: DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight. HOSE202105: DN10 x Brass 3/4BPP Female Straight x Brass 3/4BSP Male HOSE900004: DN10 x Brass 3/8BSP Female Elbow x Brass 1/2BSP Female straight HOSE202107: DN10 x Brass 3/4BSP Female Elbow x Brass 3/4BSP Female straight. HOSE300001 : DN10 x Brass 3/4BSP Female Elbow x Brass 1/2BSP Female straight.
Factor:: Reliance Worldwide Corporation (UK) Ltd.

Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:: Hydralectric Ltd.

Company Name
Hydralectric Ltd.
Address
5 High Road Byfleet Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200

View All Listings by this Company

WRAS Approval Number: #2310102

‘Comfortflex’ range of silver braided shower hoses with a TPE inner hose and EPDM seals.Open outlet

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2310102
Expiry date:: 31/10/2028
Size:: ½” BSP captive nut.
Marking:: Hansgrohe on nut.
Installation Requirements:: R001
Model:: 28 167 002, 28 167 xx0, 28 168 xx0, 28 169 002, 28 169 xx0, 28 162 002, 28 160 002. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2110140

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110140
Expiry date:: 31/10/2026
Size:: See model
Marking:: Tenby, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.
Installation Requirements:: R001
Model:: AX-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. AX-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. AX-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. AX-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. AX-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. AX-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. AX-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). AX-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). AX-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). AX-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). AX-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. AX-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. AX-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. AX-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. AX-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. AX-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). AX-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). AX-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. AX-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. AX-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. AX-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. AX-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. AX-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit AX-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. AX-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. AX-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). AX-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). AX-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).
Factor:: Tenby Imports & Exports Ltd.

Company Name
Tenby Imports & Exports Ltd.
Address
Unit 1 Crown House, Otterspool Way, Watford, Hertfordshire
Postcode
WD25 8HL

View All Listings by this Company

WRAS Approval Number: #2103347

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103347
Expiry date:: 31/03/2026
Size:: CMFTCW-1510300 - 15mm compression x M10 CMFTCW-1512300 - 15mm compression x M12 CMFTCW-1515300 - 15mm compression x 15mm compression CMFTCW-15D300 - F1/2 x 15mm compression CMFTCW-15D500 - F1/2 x 15mm compression CMFTCW-15E300 - F3/4 x 15mm compression CMFTCW-22E300 - F3/4 x 22mm compression CMFTCWIV-15D300 - F1/2 x 15mm isolation valve CMFTCWIV-15E300 - F3/4 x 15mm isolation valve CMFTCWIV-22E300 - F3/4 x 22mm isolation valve CMFTCWP-15E300 - F3/4 x 15mm pushfit (used with copper tube manufactured to BS2871)
Marking:: MB (Brand of Navigator) WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: CMFTCW-1510300, CMFTCW-1512300, CMFTCW-1515300, CMFTCW-15D300, CMFTCW-15D500, CMFTCW-15E300, CMFTCW-22E300, CMFTCWIV-15D300, CMFTCWIV-15E300, CMFTCWIV-22E300 & CMFTCWP-15E300
Factor:: Navigator MSL Ltd.

Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company

WRAS Approval Number: #2310014

Stainless steel braided, PEX lined flexible hose assemblies with EPDM washers and O ring incorporating an isolation valve (brass body and ball), tee piece (brass) and incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2310014
Expiry date:: 31/10/2028
Size:: Stainless steel braided, PEX lined flexible hose assembly incorporating 3/8" BSP split nut x 3/8" spigot end connection.
Marking:: IDC (E) logo, size, temperature and pressure on hose sleeve.
Installation Requirements:: R001 R008
Model:: 322-1175.
Manufacturer:: IDC Fluid Control Co., Ltd.

Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2103346

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103346
Expiry date:: 31/03/2026
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: MB (Brand of Navigator used under license by Wolseley), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: 236550, 236548, 236543, 236547, 236551, 236545, 236549, 236542, 236541, 236544 & 236546
Factor:: Wolseley UK

Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

WRAS Approval Number: #2312018

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections (see models). Some models incorporate a screwdriver operated isolation valve. All compression and push-fit connections are for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2312018
Expiry date:: 31/12/2028
Size:: See Model list. Note, for the connection sizes listed in the models below, use the following key: XXMM = XXmm compression, MXXx1 = MXXx1 (M) FXX” = XX” BSP (F) XXmm Pushfit = XXmm Pushfit
Marking:: Dingbo logo, WRAS and Date of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Model:: Model Code/Number (Connection Size) DB8MM-15MM×M10L (15MM × M10x1) DB8MM-15MM×M10S (15MM × M10×1) DB8MM-1/2×M10L (F1/2" × M10×1) DB8MM-1/2×M10S (F1/2" × M10×1) DB9MM-1/2×1/2 (F1/2" × F1/2") DB9MM-1/2×M12L (F1/2" × M12×1) DB9MM-1/2×M12S (F1/2" × M12×1) DB9MM-15MM×M12L (15MM × M12×1) DB9MM-15MM×M12S (15MM × M12×1) DB9MM-1/2×15MM (F1/2" × 15MM) DB9MM-15MM×15MM (15MM × 15MM) DB9MM-3/4×15MM (F3/4" × 15MM) DB9MM-1/2×15MMV (F1/2" × 15MM with VALVE) DB9MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-1/2×1/2 (F1/2" × F1/2") DB12MM-1/2×15MM (F1/2" × 15MM) DB12MM-15MM×15MM (15MM × 15MM) DB12MM-3/4×15MM (F3/4" × 15MM) DB12MM-3/4×22MM (F3/4" × 22MM) DB12MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-3/4×22MMV (F3/4" × 22MM with VALVE) DB19MM-3/4×22MM (F3/4" × 22MM) DB19MM-3/4C×22MM (F3/4" × 22MM) DB12MM-1/2 x 15mm Push- fit (F1/2" × 15mm Pushfit) DB12MM-3/4 x 15mm Push- fit (F3/4" × 15mm Pushfit) DB12MM-1/2 x 15mm Push- fit VALVE (F1/2" × 15mm Pushfit with VALVE) DB12MM-3/4 x 15mm Push- fit VALVE (F3/4" × 15mm Pushfit with VALVE) DB12MM-1/2 x 22mm Push- fit (F1/2" × 22mm Pushfit) DB12MM-3/4 x 22mm Push- fit (F3/4" × 22mm Pushfit) DB12MM-1/2 x 22mm Push- fit VALVE (F1/2" × 22mm Pushfit with VALVE) DB12MM-3/4 x 22mm Push- fit VALVE (F3/4" × 22mm Pushfit with VALVE) DB12MM-15mm Push-fit x 15mm Push-fit (15mm Pushfit × 15mm Pushfit) DB12MM-22mm Push-fit x 22mm Push-fit (22mm Pushfit × 22mm Pushfit) Note, any models with either ‘VALVE’ or ‘V’ on the end of the model name incorporate a screwdriver operated isolation valve.
Manufacturer:: Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name
Zhejiang Dingbo Plumbing Manufacturing Co Ltd
Address
No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company