Range of booster sets consisting of two to four electronically controlled pumps which are connected in parallel and mounted on a common base provided with suction and discharge manifolds, spherical valves, expansion vessels and pressure gauge/transducers and non return valves. Cold water use only. Maximum working pressure 10 bar where the MTPA vessel is installed. 16 bar where the MTMB vessel is used.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

1910363

Expiry date:

31/10/2024

Size:

VC 2H & VC 2V– 2” BSP(M) inlet x 1 ½” BSP(M) outlet VC 3H & VC 3V– 2 ½” BSP(M) inlet x 1 ½” BSP(M) outlet VC 4H & VC 4V 3” BSP(M) inlet x 1 ½” BSP(M) outlet

Marking:

Mikrofill, Model, year of manufacture YYYY, serial number and manufacturers name on adhesive label on control panel

Installation Requirements:

R001 R415

Model:

COLD WATER BOOSTER SETS SERIES VC 2H, VC 3H, VC 4H (HORIZONTAL PUMP VERSION) & COLD WATER BOOSTER SETS SERIES VC 2V, VC 3V & VC 4V (VERTICAL PUMP VERSION) WHOLESOME WATER PUMPS Where the following codes can be applied: A = Number of Pumps (2,3 or 4 pumps) V = Variable Speed B = Pump Model (Horizontal or Vertical) C = Controller type (MAB-MARB) D = Power input (T = 3 Phase – M = 1Phase) E = Vessel Capacity (24= 1 of 24 litre Vessel), (48= 2 of 24 litre Vessels), (72= 3 of 24 litre Vessels), (96= 4 of 24 litre Vessels) Example: SP2V-5HM06S-MAB-T/24 SP = Product Range Name A = 2 Pumps V = Variable Speed B = 5HM06S C = MAB D = T – 3 Phase E = Vessel Capacity 24L

Factor:

Mikrofill Systems Ltd.

Company Name

Mikrofill Systems Ltd.

Address

West Court, 11 Merse Road, Redditch

Postcode

B98 9HL

Country

Worcs.

Phone

+44 (0) 8452 606 020

General Email

info@mikrofill.com

View All Listings by this Company

Range of booster pumps with stainless steel bodies and impellers (AISI 304: AL-RED models or AISI 316: CP models), EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure: CP(m) 100-130-132-150-158 and AL-RED(m) 600-610-620 models: 6.0 bar. All other models: 8.0 bar. Maximum operating temperature 90°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2107073

Expiry date:

31/07/2026

Size:

1 ¼” BSP (F).

Marking:

Pedrollo, made in Italy, production date and information (YY/production line: number or letter/DDD), maximum temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Model:

Single phase (CPm or AL-REDm) or three phase (CP or AL-RED): CP(m) 100-ST4. CP(m) 130-ST4. CP(m) 132-ST4. CP(m) 150-ST4. CP(m) 158-ST4. CP(m) 170-ST4. CP(m) 170M-ST4. CP(m) 180-ST4. CP(m) 190-ST4. CP(m) 200-ST4. CP(m) 100-ST6. CP(m) 130-ST6. CP(m) 132-ST6. CP(m) 150-ST6. CP(m) 158-ST6. CP(m) 170-ST6. CP(m) 170M-ST6. CP(m) 180-ST6. CP(m) 190-ST6. CP(m) 200-ST6. AL-RED(m) 600 -4. AL-RED(m) 610 -4. AL-RED(m) 620 -4. AL-RED(m) 650 -4. AL-RED(m) 660 -4. AL-RED(m) 670 -4. AL-RED(m) 650M -4. AL-RED(m) 660M -4. AL-RED(m) 670M -4. AL-RED(m) 650L -4. AL-RED(m) 660L -4. AL-RED(m) 670L -4. AL-RED(m) 600 -6. AL-RED(m) 610 -6. AL-RED(m) 620 -6. AL-RED(m) 650 -6. AL-RED(m) 660 -6. AL-RED(m) 670 -6. AL-RED(m) 650M -6. AL-RED(m) 660M -6. AL-RED(m) 670M -6. AL-RED(m) 650L -6. AL-RED(m) 660L -6. AL-RED(m) 670L -6.

Manufacturer:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

View All Listings by this Company

Centrifugal pump with a plastic body, plastic impellers and NBR ‘O’-rings. The product includes an (integral) expansion vessel and the inlet incorporates a non-return valve (not suitable for backflow protection). Maximum working pressure 4.5 bar. Maximum operating temperature 50°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2107031

Expiry date:

31/07/2026

Size:

1” BSP (F)

Marking:

LEO on control face. Leo Group Pump(Zhejiang) Co.,Ltd logo ‘LEO’, CE, model number, maximum temperature and other technical info on data plate on body.

Installation Requirements:

R001 R415

Model:

MAC550

Manufacturer:

Leo Group Pump(Zhejiang) Co.,Ltd

Company Name

Leo Group Pump(Zhejiang) Co.,Ltd

Address

No.1, 3rd street, East industry Center,Wenling, Zhejiang

View All Listings by this Company

Single pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2105052

Expiry date:

31/05/2026

Size:

1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).

Marking:

wilo on body. Wilo, Model, WRAS, PN & max temp

Installation Requirements:

R001 R415

Model:

SINGLE PUMP BOOSTER SET: Isar BOOST5-E-3 (WILO) & Isar BOOST5-E-3-G (WILO)- single pump, size 3 m³/h (50l/min). SINGLE PUMP BOOSTER SET: Isar BOOST5-E-5 (WILO) & Isar BOOST5-E-5-G (WILO) -single pump, size 5 m³/h (83.33l/min).

Factor:

Wilo SE.

Company Name

Wilo SE.

Address

Nortkirchenstraße 100, 442363, Dortmund

Country

Germany

View All Listings by this Company

Range of multistage pumps incorporating a stainless-steel housing and impellers. Model MHS170 6M has a maximum working pressure of 7.5 bar. Model MHB145 5M has a maximum working pressure of 6.2 bar. Maximum operating temperature 65˚C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2109036

Expiry date:

30/09/2026

Size:

Please refer to model.

Marking:

WENDY, model and other product information on junction box.

Installation Requirements:

R001 R415

Model:

MHB145 5M: 1” BSP (F) inlet x 1¼” BSP (F) outlet. MHS170 6M: 1¼” BSP (F) inlet x 1¼” BSP (F) outlet.

Manufacturer:

Fujian Fuan Wendy Electrical Machinery Co Ltd

Company Name

Fujian Fuan Wendy Electrical Machinery Co Ltd

Address

Qinxiyang Industrial Zone Fuan Fujian

Country

China

View All Listings by this Company