Water Regulations Approval Scheme Ltd

Pumps

Section Code 1610 : Wholesome water use.

WRAS Approval Number: #2105026

Range of multistage centrifugal pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. Maximum operating pressure 11.0 bar. Maximum working temperature 90°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105026
Expiry date:: 31/05/2026
Size:: 1” BSP (F) inlet x 1 ¼” BSP (F) outlet.
Marking:: Pedrollo S.p.A. logo on body. PEDROLLO, CE, model number, maximum temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Model:: Single Phase: FCRm 90/5, FCRm 90/6, FCRm 90/7, FCRm 130/3, FCRm 130/4, FCRm 130/5, FCRm200/3, FCRm 200/4, FCRm 200/5. Three Phase: FCR 90/5, FCR 90/6, FCR 90/7, FCR 130/3, FCR 130/4, FCR 130/5, FCR 130/6, FCR 200/3, FCR 200/4, FCR 200/5, FCR200/6.
Manufacturer:: Pedrollo Spa

Company Name
Pedrollo Spa
Address

View All Listings by this Company

WRAS Approval Number: #2105028

Range of pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Single versions are standalone pumps, twin versions also include stainless steel manifolds. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105028
Expiry date:: 31/05/2026
Size:: 1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).
Marking:: Pedrollo on body. Model, PN, max temp, date of manufacture within serial number (DGP YY MM x xxx) and other technical info on adhesive label on body.
Installation Requirements:: R001 R415
Model:: Single pump booster set: DGPED 3 (Pedrollo) DGPED 5 (Pedrollo) Twin pump booster set with manifold: Gruppo 2DGPED 33 (Pedrollo) Gruppo 2DGPED 35 (Pedrollo) Gruppo 2DGPED 55 (Pedrollo) DGPED 3 = single pump, size 3 m³/h (50l/min). DGPED 5 = single pump, size 5 m³/h (83.33l/min). 2DGPED 33 = 2 pumps booster, size 3 m³/h (50l/min) for each pump. 2DGPED 35 = 2 pumps booster, size 3 m³/h (50l/min) for one pump, size 5 m³/h (83.33l/min) for the other pump. 2DGPED 55 = 2 pumps booster, size 5 m³/h (83.33l/min) for each pump.
Manufacturer:: Pedrollo S.p.A.

Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311

View All Listings by this Company

WRAS Approval Number: #2104008

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: EH Three phase models 85°C, EH Single phase models 55.0°C and EHsp models 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2104008
Expiry date:: 30/04/2026
Size:: EH models: 1 ¼” BSP (F) – 2” BSP (F) EHsp models: 1” BSP (F)
Marking:: Data label showing Franklin electric S.r.l, model number, PMAX and other technical info on body. WRAS label on body. Max temperature on adhesive label on body.
Installation Requirements:: R001 R415
Model:: Horizontal/Self-Priming Multi-Stage Pumps: EH 3/XX A KKK MM EN B C D. EH 5/XX A KKK MM EN B C D. EH 9/XX A KKK MM EN B C D. EH 15/XX A KKK MM EN B C D. EH 20/XX A KKK MM EN B C D. EHsp 3/XX A KKK MM EN B C D. EHsp 5/XX A KKK MM EN B C D. Where: EH = Standard model. EHsp = Self-priming model. 3/5/9/15/20 = rated power [m³/h]. XX = no. of stages (50 Hz single phase): 2 to 9 for EH 3 & 5; 2 to 6 for EH 9; 2 to 3 for EH 15; 2 for EH 20; 4 & 5 stages for EHsp 3 & 5. (50 Hz three phase): 2 to 9 for EH 3 & 5; 2 to 8 for EH 9; 2 to 7 for EH 15; 2 to 5 for EH 20; 4 & 5 stages for EHsp 3 & 5. (60 Hz single phase): 2 to 7 for EH 3; 2 to 5 for EH 5; 2 to 3 for EH 9; 3 to 5 for EHsp 3 & 5. (60 Hz three phase): 2 to 7 for EH 3 & 5; 2 to 5 for EH 9; 2 to 4 for EH 15; 2 to 3 for EH 20; 3 to 5 for EHsp 3 & 5. A = Pump material: “I” for AISI 304 (All the versions) and “N” for AISI 316 (not available for “EHsp” versions). KKK = Motor power (kW x 10). MM = motor connection and frequency as follows: M5 = single phase and 50Hz T5 = three phase and 50Hz M6 = single phase and 60Hz T6 = three phase and 60Hz EN = Type of mechanical seal: E0 or E1 or E2 for EH 3/5/9 models. E1 or E2 for EH 15/20 models. E0 for EHsp models. B = “No load” - standard version, D - sealing disc with plug. C = “No load” - standard version, A - cable with plug, S = without condensate drain plugs. D = motor efficiency class.
Factor:: Franklin Electric SRL

Company Name
Franklin Electric SRL
Address
Via Asolo 7 Dueville Vicenza 36031
Country
Italy
Phone
+39 0444 360366
General Email
info.it@fele.com

View All Listings by this Company

WRAS Approval Number: #2105014

Range of self-priming pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. Maximum working pressure 7.0 bar. Cold water use only. From November 2021 maximum operating temperature 60°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105014
Expiry date:: 31/05/2026
Size:: 1” BSP (F) inlet/outlet.
Marking:: Plurijet and logo on body. PEDROLLO, Plurijet. CE, temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Model:: Plurijetm 3/80, Plurijetm 4/80, Plurijetm 3/100, Plurijetm 4/100, Plurijet 3/80, Plurijet 4/80, Plurijet 3/100, Plurijet 4/100.
Manufacturer:: Pedrollo S.p.A.

Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311

View All Listings by this Company

WRAS Approval Number: #2104914

Range of single stage end suction pumps with stainless steel or cast iron pump housings, EPDM ‘O’-rings and wear rings available in low-lead bronze/brass or stainless steel. Cast iron models are coated in black cathodic paint (textured finish) or black epoxy (smooth finish). The pumps are available with carbon graphite/silicon carbide mechanical shaft seal. Impellors are available in cast iron with black cathodic paint, low-lead bronze or stainless steel. The pumps are available with fixed flange, as well as loose flange (model dependent). Maximum working pressure 10.0 or 16.0 bar depending on model. Maximum operating temperatures: Stainless steel and cast iron with (smooth) epoxy coating pumps 85°C. Cast iron pumps with (textured) cathodic paint coating are cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2104914
Expiry date:: 30/04/2026
Size:: Nominal ø of suction port sizes (DN): 50, 65, 80, 100, 125, 150, 200, 250, 300, 350. Nominal ø of discharge port (DN): 32, 40, 50, 65, 80, 100, 125, 150, 200, 250,300
Marking:: Grundfos on body. Model, Pressure Max, Temperature Max, Made in Hungary and Grundfos logo on data plate.
Installation Requirements:: R001 R415
Model:: NB, NBE, NBG, NBGE, NK, NKE, NKG, NKGE. NB, NBE, NBG, NBGE Example codes: NBE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NBG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. NK, NKE, NKG, NKGE Example codes: NKE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NKG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. Where: NBE, NBG, NKE or NKG is the type range. It can also be NB, NBGE, NK or NKGE. NB, NBG, NK, NKG: Pump with standard motor. NBE, NBGE, NKE, NKGE: Pump with MGE motor. _ Nominal diameter (mm) of inlet port (DN) - not displayed on NB/NBE/NK/NKE models. For NBG/NBGE/NKG/NKGE models the value will be between 50 & 350. 32 = Nominal diameter (mm) of outlet port (DN). Value between 32 & 300. 125 = Nominal impeller diameter [mm] (dimension varies). .1 = Reduced performance. 142 = Actual impeller diameter [mm] (dimension varies). Sensor version S1 Without factory-fitted sensor, pressure sensor is supplied with the pump. S2 With factory-fitted differential-pressure sensor, Series 2000. X1: Letter or multiple letters for pump version. Pipe connection F: DIN flange. Flange pressure rating (PN - nominal pressure) 1 = 10 bar. 2 = 16 bar. X2: Materials - Pump housing/Impeller/Wear ring/Shaft denoted by a single letter. Rubber parts in pump The letter indicates material of O-ring for pump cover E: EPDM. Shaft seal arrangement S: Single seal. Code for mechanical shaft seal and shaft seal rubber parts BBQE or BQQE.
Factor:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company