“Yonos PARA Z15 and Yonos PARA Z25 ” range of circulation pumps incorporating brass bodies, plastic impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2010368

Expiry date:

31/10/2025

Size:

1” BSP (M) & 1½” BSP (M).

Marking:

Wilo, model, date of manufacture (YY)W(WW) and other technical information on adhesive label on motor head.

Installation Requirements:

R001

Model:

Yonos PARA Z AA BB CCCC DDD EEE FF AA denotes: connection size (15 for 1” or 25 for 1½”). BB denotes; maximum height of flow. CCCC denotes: customer control interface. DDD denotes: pump housing length. EEE denotes: electrical connection FF denotes: box orientation

Manufacturer:

Wilo Intec

Company Name

Wilo Intec

Address

50 Avenue Eugene Casella, 18700 Aubigny Sur Nere, France

Phone

+332 48 81 62 62

View All Listings by this Company

Range of single and twin ended shower booster pumps with plastic bodies and plastic impellers. The inlets/outlets incorporate stainless steel braided EPDM lined flexible hose assemblies with isolation valves and stainless steel strainers. The outlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The Universal Twin models incorporate an expansion vessel. Maximum working pressure (See model). Maximum operating temperature 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2007056

Expiry date:

31/07/2025

Size:

15mm push fit: CT50+XTRA, CT50XTRA, CT54XTRA, CT55+XTRA, CT55XTRA, CT59XTRA, CT75+XTRA, CT75XTRA, CT79XTRA, CT85+XTRA, CT85XTRA, CT89XTRA, CT60B, CT60BU, CT64HUXTRA, CT64HXTRA 21mm push fit: CTFORCE30IPS, CTFORCE30IPT, CTFORCE30ISU, CTFORCE30ITU, CTFORCE15IPT, CTFORCE15ITU, CTFORCE20IPS, CTFORCE20IPT, CTFORCE20ISU, CTFORCE20ITU, CT84HUXTRA, CT84HXTRA 22mm push fit: CTFORCE30PS, CTFORCE30PT, CTFORCE30SU, CTFORCE30TU, ACTFORCE30SU, ACCUFORCE, CTFORCE15PT, CTFORCE15TU, CTFORCE20PT, CTFORCE20PS, CTFORCE20SU, CTFORCE20TU, CT80B, CT80BU

Marking:

Salamander logo (graphical image of a Salamander) at each end of the pump housing. Salamander ID badge at the edge of the junction box. Pump ratings label sticker on top of junction box. Motor ratings label sticker on motor body.

Installation Requirements:

R001 R150 R415

Model:

CT50+XTRA, CT50XTRA, CT54XTRA, CT55+XTRA, CT55XTRA, CT59XTRA, CT75+XTRA, CT75XTRA, CT79XTRA, CT85+XTRA, CT85XTRA, CT89XTRA, CT60B, CT60BU, CT64HUXTRA, CT64HXTRA, CT80B, CT80BU, CT84HUXTRA, CT84HXTRA, CTFORCE15IPT, CTFORCE15ITU, CTFORCE15PT, CTFORCE15TU, CTFORCE20IPS, CTFORCE20IPT, CTFORCE20ISU, CTFORCE20ITU, CTFORCE20PT, CTFORCE20PS, CTFORCE20SU, CTFORCE20TU, CTFORCE30IPS, CTFORCE30IPT, CTFORCE30ISU, CTFORCE30ITU, CTFORCE30PS, CTFORCE30PT, CTFORCE30SU, CTFORCE30TU, ACTFORCE30SU, ACCUFORCE. Key: XTRA = Plastic Ended, B = Plastic Ended with Plastic Bypass, H = Plastic Ended with Plastic Bypass (Ireland) FORCE = Brass Ended, A = Manufactured for a separate company, ACCU = Accumulator pump, U = Includes expansion vessel, P = No expansion vessel, T= Twin ended pump, S = Single ended pump, I = sold in Ireland, + = supplied with couplers with isolating valves, The XTRA models without a + come with couplers without isolating valves. The rest of the product ranges include isolating valves as standard. Pressures: 50/54/55/59/15 = 1.5 Bar, 60/64 = 1.8 Bar, 75/79/20 = 2.0 Bar, 85/89 = 2.5 Bar, 80/84 = 2.6 Bar, 30 = 3.0 Bar, ACCUFORCE = 4.0 Bar.

Manufacturer:

Salamander Pumps Ltd

Company Name

Salamander Pumps Ltd

Postcode

SR5 3XE

Phone

0191 516 2002

View All Listings by this Company

Range of vertical submersible multistage pumps. Cold water use only. Open outlet use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011021

Expiry date:

30/11/2025

Size:

Suction manifold inlet x 1 ¼” BSP (F) outlet

Marking:

DAB, model and other technical information on body.

Installation Requirements:

R001

Model:

ESYBOX DIVER 55/120. DTRON3 35/90. DTRON3 45/90. DTRON3 35/120. DTRON2 35/90. DTRON2 45/90. DTRON2 35/120.

Manufacturer:

DAB Pumps Spa

Company Name

DAB Pumps Spa

Address

Via Marco Polo 35035 Mestrino (PD) Italy

Phone

Tel: +39 0499 048811 Fax: +39 0499 000179

View All Listings by this Company

Range of central heating pumps incorporating polyether sulphone impellers, copper-tin alloy body, carbon graphite axial bearings and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011073

Expiry date:

30/11/2025

Size:

DN32, DN40, DN50, DN65

Marking:

DAB PUMP S.p.A, model number, date of manufacture and other technical info on adhesive label on body

Installation Requirements:

R001 R415

Model:

EVOPLUS B XXX/YYY.ZZ SAN M Where: XXX = Hmax (m); either 40, 60, 80, 100, 120, 150, or 180. YYY = (Centre distance); either 220, 250, 280, or 340. ZZ = Size of flange connection (DN); either 32, 40, 50, or 65. EVOPLUS B 120/220.32 SAN M EVOPLUS B 120/250.40 SAN M EVOPLUS B 150/250.40 SAN M EVOPLUS B 180/250.40 SAN M EVOPLUS B 100/280.50 SAN M EVOPLUS B 120/280.50 SAN M EVOPLUS B 150/280.50 SAN M EVOPLUS B 180/280.50 SAN M EVOPLUS B 40/340.65 SAN M EVOPLUS B 60/340.65 SAN M EVOPLUS B 80/340.65 SAN M EVOPLUS B 100/340.65 SAN M EVOPLUS B 120/340.65 SAN M EVOPLUS B 150/340.65 SAN M

Manufacturer:

DAB Pumps Spa

Company Name

DAB Pumps Spa

Address

Via Marco Polo 35035 Mestrino (PD) Italy

Phone

Tel: +39 0499 048811 Fax: +39 0499 000179

View All Listings by this Company

Range of vertical multistage booster pumps, with stainless steel bodies and impellors (AISI304 or 316 see model). Maximum working pressure (model dependent): 4.0 bar models: BMVET(I) 32-10-1 to BMVET(I) 32-40. BMVET(I) 42-10-1 to BMVET(I) 42-20. BMVET(I) 65-10-1 to BMVET(I) 65-20-2. BMVET(I) 85-10-1 to BMVET(I) 85-10. 10.0 bar models: BMVET(I) 1-2 to BMVET(I)1-36. BMVET(I) 2-2 to BMVET(I) 2-11. BMVET(I) 3-2 to BMVET(I) 3-29. BMVET(I) 4-2 to BMVET(I) 4-10. BMVET(I) 8-2 to BMVET(I) 8-20. BMVET(I) 12-2 to BMVET(I) 12-18. BMVET(I) 16-2 t BMVET(I) 16-16. BMVET(I) 20-1 to BMVET(I) 20-17. BMVET(I) 32-50-2 to BMVET(I) 32-100. BMVET(I) 42-30-2 to BMVET(I) 42-50. BMVET(I) 65-20-1 to BMVET(I) 65-30. BMVET(I) 85-20-2 to BMVET(I) 85-30-2. 15.0 bar models: BMVET(I) 2-13 to BMVET(I) 2-26. BMVET(I) 3-31 to BMVET(I) 3-36. BMVET(I) 4-12 to BMVET(I) 4-22. BMVET(I) 32-110-2 to BMVET(I) 32-140. BMVET(I) 42-60-2 to BMVET(I) 42-130-2. BMVET(I) 65-40-2 to BMVET(I) 65-80-1. BMVET(I) 85-30-1 to BMVET(I) 85-60. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2009028

Expiry date:

30/09/2025

Note:

Claims for flow rate are made by the manufacturer and not considered part of the listing.

Size:

DN25 (Pumps with 1, 2 or 3 m³/h rated flow rates). DN32 (Pumps with 4 m³/h rated flow rates). DN40 (Pumps with 8 m³/h rated flow rates). DN50 (Pumps with 12, 16 or 20 m³/h rated flow rates). DN65 (Pumps with 32 m³/h rated flow rates). DN80 (Pumps with 42 m³/h rated flow rates). DN100 (Pumps with 65 or 85 m³/h rated flow rates).

Marking:

EFAFLU and other technical information on data plate. Flow arrow, PN and DN on body.

Installation Requirements:

R001 R415

Model:

BMVE T X - Y - Z. BMVE TI X - Y - Z. Model key: BMVE = Pump series name. T = Stainless Steel AISI304. TI = Stainless Steel AISI316. X = rated flow rate in m³/h (1, 2, 3, 4, 8, 12, 16, 20, 32, 42, 65, 85). Y = number of stages (2-140). Z = number of small impellors (blank, 1 or 2).

Factor:

EFAFLU BOMBAS E VENTILADORES S.A

Company Name

EFAFLU BOMBAS E VENTILADORES S.A

Phone

+351 252 298 700

General Email

geral@efaflu.pt

View All Listings by this Company

CM(E)(C) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. (CMEC models were added October 2023). The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Cast iron models: Maximum working pressure 10.0 bar. Cold water use only. Stainless steel models: Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for self-priming models, 99°C for all other models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011907

Expiry date:

30/11/2025

Size:

1” - 2” BSP (F) or NPT inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model and technical information on adhesive label either on the terminal box or fan cover.

Installation Requirements:

R001 R415

Model:

CM(E)(C)1, CM(E)(C)3 and CM(E)(C)5: CM(E)(C)1, cast iron / AISI304 2 – 8 stages. CM(E)(C)3, cast iron / AISI304 2 – 8 stages. CM(E)(C)5, cast iron / AISI304 2 – 8 stages. CM(E)(C)1, AISI316 2 - 14 stages. CM(E)(C)3, AISI316 2 - 14 stages. CM(E)(C)5, AISI316 2 - 13 stages. CM(E)(C)10 CM(E)(C)15 and CM(E)(C)25: CM(E)(C)10, cast iron / AISI304 1 – 5 stages. CM(E)(C)15, cast iron / AISI304 1 – 4 stages. CM(E)(C)25, cast iron / AISI304 1 – 4 stages. CM(E)(C)10, AISI316 1 – 8 stages. CM(E)(C)15, AISI316 1 – 4 stages. CM(E)(C)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI316 3 – 6 stages (S or O) CM(E)3, AISI316 3 – 6 stages (S or O) CM(E)5, AISI316 3 – 7 stages (S or O) Model key: CM/CME/CMEC X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. CMEC = Centrifugal Modular with integrated frequency converter and only core functions of the motor unit. (NOTE: CMEC models were added October 2023). X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres). S: Self-priming version (maximum suction lift 4 metres). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal Npt thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage: B/B1/C/D/E/E1/F/G/H/I/J/O/S/T/U/V/X. X12 = Motor information: A/B/C/D/EF/G/H/I/J. X13 = Mains plug: A/B/C/D. X14 = Sensor: N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C-A-A-N

Factor:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Country

Denmark

Phone

+45 24610542

View All Listings by this Company

Range of submersible pumps with stainless steel bodies, impellers and shaft. The XPW range incorporates a strainer cowl on the suction end of the pump. The XPWA range features a stainless head which provides a threaded connection instead of the strainer. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011326

Expiry date:

30/11/2025

Size:

XPW: 1¼” BSP (F). XPWA: 1¼” BSP (F) x 1½” BSP (F).

Marking:

Dutypoint, model and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Model:

(XPW)(i)(ii)-(iii) and (XPWA)(i)(ii)-(iii) ranges. Where: XPW or XPWA = range name. (i) = Nominal flow in m³/h x 10 (3, 5 or 9). (ii) = Number of stages x 10 (040-100). (iii) = Voltage/motor speed (M = single phase 230V, T = Three phase 400V, T230 = Three phase 230V. All of which can also be prefixed with 6 for 60Hz motor speed. Std. is 50Hz). Example codes: XPW3040-M & XPWA9090-T230.

Factor:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Olympus Park, Quedgeley Gloucestershire

Postcode

GL2 4DH

General Email

sales@dutypoint.com

View All Listings by this Company