Range of pressure transmitters with stainless steel bodies and EPDM ‘O’-rings. Maximum working pressures: 520 XXX range 100.0 bar, 522 XXX range & 540 XXX range 60.0 bar. Maximum operating temperature 520 XXX & 522 XXX range 99°C & 540 XXX range 80°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2004017

Expiry date:

30/04/2025

Size:

G½” sealed at front with manometer, G½” sealed at front, 7/16” -20 UNF sealing cone, ¼” -18 NPT sealing thread, G¼” sealed at front, G¼” sealed at back DIN 3852-E, R¼” sealing thread EN 10226, ¼” -18 NPT inside sealing thread, M20x1.5 sealed at front with manometer, ¼” -14 NPT inside sealing thread, G¼” sealed at front with manometer, 1/8” -27 NPT sealing thread, G1/8” sealed at front, G¼” sealed at front, G¼” sealed at back DIN 3852-E with manometer, 7/16” -20 UNF inside sealed at front SAE J1926-1 / ISO 11926-1, 7/16” -20 UNF inside sealing cone with Schrader, 7/16” -20 UNF inside sealing cone, ½” -14 NPT sealing thread, G¼” sealed back.

Marking:

520 and 522 models: HUBA CONTROL, article number and date of manufacture (YY/MM/DD) on body. 540 models: HUBA CONTROL on adhesive label on face. Article number and date of manufacture (YY/MM) on adhesive label on body.

Installation Requirements:

R001

Model:

520 XXX, 522 XXX & 540 XXX ranges. ‘XXX’ is replaced with various numbers denoting pressure range, application, power supply, electrical connections and other parameters which do not relate to water contact

Factor:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Crane brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2008700

Expiry date:

31/08/2025

Size:

¼" BSP (M) taper threaded.

Marking:

Crane logo, WRAS and temperature on plastic tag.

Installation Requirements:

R001

Model:

Crane P84 Pressure Test Points.

Factor:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Phone

01473 277 364

General Email

bwiggins@crane-ltd.co.uk

View All Listings by this Company

Hattersley brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2008701

Expiry date:

31/08/2025

Size:

¼" BSP (M) taper threaded.

Marking:

Hatterlsley logo, WRAS and temperature on plastic tag.

Installation Requirements:

R001

Model:

Hattersley Fig 631 PRESSURE TEST POINTS

Factor:

Hattersley

Company Name

Hattersley

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

View All Listings by this Company

‘Cart’ range of plastic flow regulators within a plastic housing and either silicone, EPDM or NBR sealing gaskets and optional stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005300

Expiry date:

31/05/2025

Size:

14.68mm OD

Marking:

Neoperl on body.

Installation Requirements:

R001

Model:

cart - AB.CDEF.GHIJK Where: AB – denotes 31 CDEF – manufacturers sequential number GHIJK – packaging variations

Manufacturer:

Neoperl UK

Company Name

Neoperl UK

Address

View All Listings by this Company

Wall plate elbow (105° angle) with a brass body. Maximum operating temperature 100°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005327

Expiry date:

31/05/2025

Note:

Open outlet use only.

Size:

½” BSP (F) x 15mm compression serrated hose connection.

Marking:

Interplast logo on body

Installation Requirements:

R001 R040

Model:

800011620

Manufacturer:

Interplast SA

Company Name

Interplast SA

Address

10th KM National Road THessaloniki Katerni PO Box 62

Country

57400 Sindos

Phone

+30 2310 795531 Fax: +30 31 795373

View All Listings by this Company

Manifold with a brass body and 5 outlets. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005328

Expiry date:

31/05/2025

Size:

1” BSP (F) inlets x 1/2” BSP (F) outlets

Marking:

1” Elviom on body

Installation Requirements:

R001

Model:

589403400051

Manufacturer:

Interplast SA

Company Name

Interplast SA

Address

10th KM National Road THessaloniki Katerni PO Box 62

Country

57400 Sindos

Phone

+30 2310 795531 Fax: +30 31 795373

View All Listings by this Company

Range of stainless steel diaphragm valves with an EPDM diaphragm controlling the flow with handwheel operating member. Maximum working pressure 19.8 Bar. Maximum operating temperature 60°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2001008

Expiry date:

31/01/2025

Size:

DN25 & DN50 (Butt weld)

Marking:

SISTO, DN, temperature, pressure, model, serial number, year of manufacture (YYYY), WRAS and flow arrow on body.

Installation Requirements:

R001

Model:

SISTO-20NA Diaphragm valve, DN25. SISTO-20NA Diaphragm valve, DN50.

Manufacturer:

Sisto Armaturen SA

Company Name

Sisto Armaturen SA

Address

18, rue Martin Maas, L-6468 Echternach

Country

Luxembourg

View All Listings by this Company

Range of pressure sensors with stainless steel bodies, EPDM ‘O’-rings and ceramic diaphragms. Rectus 21 model has a maximum working pressure of 20.0 bar. ¼” BSP (M) model has a maximum working pressure of 50.0 bar. Cold water use only. From November 2019 Maximum operating temperature 85°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

1905092

Expiry date:

31/05/2024

Size:

Rectus 21 or ¼” BSP (M).

Marking:

ABB, WRAS, model number, pressure range and serial number on adhesive label on body.

Installation Requirements:

R001

Model:

3KXF004496XXXXX RANGE OF PRESSURE SENSORS

Factor:

ABB Ltd.

Company Name

ABB Ltd.

Address

Oldends Lane, Stonehouse, Glos.

Postcode

GL10 3TA

View All Listings by this Company

Range of axial expansion joints with either threaded or flanged end connections. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005309

Expiry date:

31/05/2025

Size:

Please refer to model.

Marking:

Model, size and MSC on body.

Installation Requirements:

R001

Model:

BSPT male end axial expansion joints where number in bracket relates to end connection size: AX3/015/MSC(25) - AX3/020/MSC(25) - AX3/025/MSC(25) - AX3/032/MSC(25) - AX3/040/MSC(25) AX3/050/MSC(25) - AX3/065/MSC(25) - AX3/015/MSC(50) - AX3/020/MSC(50) - AX3/025/MSC(50) AX3/032/MSC(50) - AX3/040/MSC(50) - AX3/050/MSC(50) Steel pipe end where number between /015/ relates to end connection size in mm eg xxx/015/xxx = 15mm: AX3/015/SPE - AX3/022/SPE - AX3/028/SPE - AX3/035/SPE - AX3/042/SPE - AX3/054/SPE Copper/steel end where number /015/ relates to end connection size in mm eg xxx/015/xxx = 15mm AX3/015/CPE - AX3/022/CPE - AX3/028/CPE - AX3/035/CPE - AX3/042/CPE - AX3/054/CPE PN16 flanged end connection where the /032/ relates to the flange size eg xxx/032/xxx = 32mm flange AX2/032/PN16 - AX2/040/PN16 - AX2/050/PN16 - AX2/065/PN16 - AX2/080/PN16 - AX2/100/PN16 - AX2/125/PN16 - AX2/150/PN16 - AX2/200/PN16 Tied expansion joint with PN16 flange where the /032/ relates to the flange size eg xxx/032/xxx = 32mm flange FA3/032/PN16T - FA3/040/PN16T - FA3/050/PN16T - FA3/065/PN16T - FA3/080/PN16T - FA3/100/PN16T - FA3/125/PN16T - FA3/150/PN16T - FA3/200/PN16T Double tied expansion joint with PN16 flange where the /032/ relates to the flange size eg xxx/032/xxx = 32mm flange FA2/032/PN16 - FA2/040/PN16 - FA2/050/PN16 - FA2/065/PN16 - FA2/080/PN16 - FA2/100/PN16 - FA2/125/PN16 - FA2/150/PN16 - FA2/200/PN16

Factor:

DST Group Ltd

Company Name

DST Group Ltd

Address

Design House, Unit 2C Southgate, White Lund Industrial Estate, Morecombe

Postcode

LA3 3PB.

Country

Lancashire.

Phone

01524 389 494

View All Listings by this Company

Range of combined bath filler, waste and overflow assemblies in various finishes. Maximum operating temperature 60ºC.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

1909409

Expiry date:

30/09/2024

Note:

Open outlet use only.

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Marking:

FANTINI & WRAS ON FACE PLATE

Installation Requirements:

R001 R090 R160

Model:

G1XXW002 combined bath filler ‘XX’ denotes finish and is replaced with. Standard chrome PVD chrome Black chrome Gold Rose gold PVD gold Brushed bronze Brushed copper White matt White Black matt Black Brushed nickel

Factor:

Fratelli Fantini Spa

Company Name

Fratelli Fantini Spa

Address

Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company