Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101334

Expiry date:

31/01/2026

Size:

see model

Marking:

Dunshan Press and size on body.

Installation Requirements:

R001

Model:

DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm

Manufacturer:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of polypropylene push-fit fittings and inserts for use with MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101004

Expiry date:

31/01/2026

Size:

20mm & 25mm

Marking:

PN, JG and size on body

Installation Requirements:

R001

Model:

UG101B - 20 x 1/2" BSP MALE ADAPTOR UG102B - 25 x 3/4" BSP MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG222025B - 20 x 25mm STEM ELBOW UG222525B - 25 x 25mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25 x 20mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UGPWB1514 - 15 x 1/2" WING BACK ELBOW UGPWB2014 - 20 x 1/2" BACK PLATE ELBOW UGPWB2514 - 25 x 1/2" BACK PLATE ELBOW UGPWB2516 - 25 x 3/4" BACK PLATE ELBOW UTS147-DB - 20MM PIPE INSERT UTS197-DB- 25MM PIPE INSERT

Factor:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of polypropylene push-fit fittings with inserts for use with MDPE Pipe (manufactured to BS EN 12201-2) on one side of the fitting and PB (BS 7291), PEX (BS 7291) or Copper (BS EN 1057) on the other. Models UTS147-DB, UTS197-DB & UTS251-DB are for above and below ground use. All other models are for above ground use only. Maximum working pressure when using 20mm pipe is 16.0 bar. Maximum working pressure when using 25mm & 32mm pipe is 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101045

Expiry date:

31/01/2026

Marking:

PN, JG & size on protective cap.

Installation Requirements:

R001

Model:

Above ground use only. UG601B - 20 x 15MM PE-COPPER COUPLER. UG602B - 25 x 22MM PE-COPPER COUPLER. UG603B - 25 x 15MM PE-COPPER COUPLER. UG604B - 32 x 28MM PE-COPPER COUPLER. UG063228B - 32 X 28MM REDUCER. Above and below ground use. UTS147-DB - 20MM PIPE INSERT UTS197-DB - 25MM PIPE INSERT UTS251-DB - 32MM PIPE INSERT

Factor:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with EN ISO 21003 pipe. Maximum working pressure 10.0 bar. For cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012038

Expiry date:

31/12/2025

Size:

Please refer to model.

Marking:

RIFENG & Crimp Profiles (U-TH-H) on crimp sleeve.

Installation Requirements:

R001

Model:

Equal Straight Union: F17-S1216x1216, F17-S1620x1620 F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union: F17-S1620x1216 F17-S2025x1216 F17-S2025x1620 F17-S2026x1216 F17-S2026x1620 F17-S2632x1216 F17-S2632x1620 F17-S2632x2025 F17-S2632x2026 Male Straight Union: F17-S1216x3/8 F17-S1216x1/2 F17-S1216x3/4 F17-S1620x1/2 F17-S1620x3/4 F17-S1620x1 F17-S2025x3/4 F17-S2025x1 F17-S2026x3/4 F17-S2026x1 F17-S2632x1 Female Straight Union: F17-S1216x3/8F F17-S1216x1/2F F17-S1216x3/4F F17-S1620x1/2F F17-S1620x3/4F F17-S1620x1F F17-S2025x3/4F F17-S2025x1F F17-S2026x3/4F F17-S2026x1F F17-S2632x1F Equal Elbows: F17-L1216x1216 F17-L1620x1620 F17-L2025x2025 F17-L2026x2026 F17-L2632x2632 Unequal Elbows: F17-L1620*1216 F17-L2025*1216 F17-L2025*1620 F17-L2632*2025 Male Elbows: F17-L1216x3/8 F17-L1216x1/2 F17-L1216x3/4 F17-L1620x1/2 F17-L1620x3/4 F17-L1620x1 F17-L2025x3/4 F17-L2025x1 F17-L2026x3/4 F17-L2026x1 F17-L2632x1 Female Elbows: F17-L1216x3/8F F17-L1216x1/2F F17-L1216x3/4F F17-L1620x1/2F F17-L1620x3/4F F17-L2025x3/4F F17-L2026x3/4F F17-L2025x1F F17-L2632x1F Equal Tees: F17-T1216x1216x1216 F17-T1620x1620x1620 F17-T2025x2025x2025 F17-T2026x2026x2026 F17-T2632x2632x2632 Unequal Tees: F17-T1216x1620x1216 F17-T1216x2025x1216 F17-T1620x1216x1216 F17-T2025x1216x1216 F17-T2026x1216x1216 F17-T2026x1216x1620 F17-T1620x1216x1620 F17-T1620x1620x1216 F17-T1620x2025x1620 F17-T1620x2026x1620 F17-T2025x1216x2025 F17-T2025x1620x1620 F17-T2025x2025x1620 F17-T2025x1620x2025 F17-T2026x1216x2026 F17-T2026x1620x1620 F17-T2026x1620x2026 F17-T2026x2026x1620 F17-T2632x1216x2632 F17-T2632x1620x2632 F17-T2632x2026x2026 F17-T2632x2025x2632 F17-T2632x2026x2632 Female Tee: F17-T1216x3/8Fx1216 F17-T1216x1/2Fx1216 F17-T1620x1/2Fx1620 F17-T1620x3/4Fx1620 F17-T2025x1/2Fx2025 F17-T2025x3/4Fx2025 F17-T2026x1/2Fx2026 F17-T2026x3/4Fx2026 F17-T2632x3/4Fx2632 F17-T2632x1Fx2632 Male tee: F17-T1216x3/8x1216 F17-T1216x1/2x1216 F17-T1620x1/2x1620 F17-T1620x3/4x1620 F17-T2025x1/2x2025 F17-T2025x3/4x2025 Wall-plated female elbow: F17-L1216x3/8F (Z) F17-L1216x1/2F (Z) F17-L1620x1/2F (Z) F17-L1620x3/4F (Z) F17-L2025x3/4F (Z) F17-L2026x3/4F (Z) Demountable female straight union: F17-S1216x3/8F (H) F17-S1216x1/2F (H) F17-S1216x3/4F (H) F17-S1620x1/2F (H) F17-S1620x3/4F (H) F17-S2025x3/4F (H) F17-S2026x3/4F (H) F17-S2632x1F (H) End cap: F17-D1216 F17-D1620 F17-D2025 F17-D2026 F17-D2632

Manufacturer:

Rifeng Enterprise (Foshan) Co. Ltd.

Company Name

Rifeng Enterprise (Foshan) Co. Ltd.

Address

F1 - F14 Building No. 1, Rifeng Road, Leping Town, Sanshui District, Foshan City, Guangdong Province 528318

Country

China

View All Listings by this Company

Range of crimp fittings with a bronze body incorporating EPDM O-rings. For use with copper pipe manufactured to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106010

Expiry date:

30/06/2026

Size:

See model.

Marking:

Conex Universal Limited logo: >B<, WRAS and size on fitting body.

Installation Requirements:

R001

Model:

HZ Valve adaptor: HZC625101: 15mm crimp joint X ½” BSP (M). HZC625102: 22mm crimp joint X ¾” BSP (M). HZC625103: 28mm crimp joint X 1” BSP (M). HZC625104: 35mm crimp joint X 1 ¼” BSP (M). HZC625105: 42mm crimp joint X 1 ½” BSP (M). HZC625106: 54mm crimp joint X 2” BSP (M).

Factor:

Conex Universal Ltd

Company Name

Conex Universal Ltd

Address

Global House 95 Vantage Point The Pensnett Estate Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 121 5772831

General Email

salesuk@ibpgroup.com

View All Listings by this Company

Manufacturer:

IBP Instalfittings sp ZOO

Company Name

IBP Instalfittings sp ZOO

Address

General Email

View All Listings by this Company