Combination Tap Assemblies

Section Code 0682 : Spout outlets.

Back To Directory Sections

#240402048

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): boiling, chilled or sparkling water. Ambient (hot and cold) water is controlled via a ceramic cartridge headwork with a single lever operating member. The spout incorporates a plastic aerator on the Sparkling/Chilled and the Ambient outlet, and a separate outlet for the boiling water. Both model ranges incorporate a vent outlet within the tap spout for the boiling water circuit. Maximum working pressure 5.0 bar (Ambient (hot and cold) circuit only). 95458xxx models - Boiling circuit has a maximum operating temperature of 100°C. All other circuits have a maximum operating temperature of 65°C. 95459xxx models - Boiling circuit has a maximum operating temperature of 100°C. The ambient circuit has a maximum operating temperature of 65°C. The chilled/sparkling circuit has a maximum operating temperature of 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240402048
Expiry date:
30/04/2029
Note:
Boiling, chilled or sparkling water circuits - Open outlet use only. These taps are designed to only work with the Zip HydroTap Command Centres, (sold separately). R008 applies to the pushfit fittings.
Size:
Ambient hot and cold inlets: Hot: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Cold: ½” BSP (F) to tee piece installed prior to a stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Boiling water: 8mm OD s/steel spigot (attached to tubing). Chilled or Chilled/sparkling water (model dependent): 8mm OD s/steel spigot (attached to tubing).
Marking:
ZIP on operating member
Installation Requirements:
R001 R006 R007 R008 R009
Model:
Celsius Plus All-in-one Boiling/Chilled: 95458xxx. Celsius Plus All-in-one Boiling/Chilled/Sparkling: 95459xxx. Where xxx denotes finish and can be replaced with: Z00 = Chrome, Z01 = Brushed Chrome, Z03 = Matt Black.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#240402057

Deck mounted, fixed, bath spout (brass bodies with various finishes) with a manual diverter to shower. Maximum working pressure 5.0 bar. Maximum operating temperature 85 °C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240402057
Expiry date:
30/04/2029
Size:
½” BSP (M).
Marking:
Lefroy Brooks logo on underside of spout.
Installation Requirements:
R001 R005 R020
Model:
PSH008 YY. Understanding the product codes: First group of three letters and three numbers (PSH008). These are codes that remains constant and relate to the individual design of the spout. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome
Factor:
Lefroy Brooks Diffusion Ltd.
Company Name
Lefroy Brooks Diffusion Ltd.
Address
Unit 3 Marston Road, Wolverhampton, West Midlands
Postcode
WV2 4LX

View All Listings by this Company

Print This Approval


#240102060

Deck mounted spout outlets (brass body - various finishes). Maximum operating temperature 65°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240102060
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/01/2029
Note:
Open outlet use only.
Size:
½" BSP (M)
Marking:
Lefroy Brooks logo on underside of spout
Installation Requirements:
R001 R010 R040
Model:
PSH003 YY First group of six letters and numbers – This is the product identification code. This remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome
Factor:
Lefroy Brooks Diffusion Ltd.
Company Name
Lefroy Brooks Diffusion Ltd.
Address
Unit 3 Marston Road, Wolverhampton, West Midlands
Postcode
WV2 4LX

View All Listings by this Company

Print This Approval


#240502013

Wall mounted spout outlet with chromium plated brass body, incorporating a plastic flow regulator in the inlet. Open outlet use. Maximum operating temperature: 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240502013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/05/2029
Size:
1/2" BSP (M).
Marking:
Dornbracht on spout.
Installation Requirements:
R001 R040
Model:
Deque - 13430740.
Factor:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 D-58640 Iserlohn Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval


#240504002

Range of wall mounted spout outlets (brass bodies – various finishes), incorporating a plastic aerator. Open outlet use only. Maximum operating temperature 65°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240504002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/05/2029
Size:
½”BSP(M) – ½” BSP (M) Adapter
Marking:
C.P. Hart on faceplate
Installation Requirements:
R001 R040
Model:
CPH0323 (CP/MB/BRG/BGM/BB/BN/PB) Each product in seven colors CP:Chrome plating MB:Matt black BRG:Brushed rose gold BGM:Gun mental BB:Brushed brass BN:Brushed nickel PB:polished black
Factor:
C.P.Hart
Company Name
C.P.Hart
Address
Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford
Postcode
DA2 6QA

View All Listings by this Company

Print This Approval


#240502023

Deck mounted spout outlet with chromium plated brass body. The inlet incorporates a plastic flow regulator, and the spout outlet incorporates a plastic flow straightener with an integral strainer. Maximum working pressure: Open Outlet. Maximum operating temperature 60.0°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240502023
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/05/2029
Size:
½” BSP (M).
Marking:
Dornbracht on base of spout.
Installation Requirements:
R001 R006
Model:
13630740
Factor:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 D-58640 Iserlohn Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval


#240502046

Wall mounted spout with a brass body (various finishes) and a brass rough kit incorporating a stainless-steel strainer and a plastic flow regulator on the inlet of the spout. Open outlet use only. Maximum operating temperature: 60.0°C (10 942 xx0) and 80.0°C (10 941 180)

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240502046
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/05/2029
Size:
¾” BSP (M) (10 942 xx0) and ¾” BSP (F) (10 941 180)
Marking:
AXOR on body.
Installation Requirements:
R001 R040
Model:
10 942 xx0 (Spout) 10 941 180 (Rough Kit) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 12 of 12

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.