Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0470 : Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: #1901006

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1901006
Expiry date:: 31/07/2024
Size:: Stainless steel braided EPDM lined flexible hose assemblies with 15mm compression end connections.
Marking:: Ideal Standard on operating member.
Installation Requirements:: R001 R006 R010
Model:: B2136AA Calista.
Manufacturer:: Ideal Standard (UK) Ltd

Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

WRAS Approval Number: #1911900

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1911900
Expiry date:: 31/12/2024
Size:: 15mm copper inlet tails
Marking:: Bristan on operating member
Installation Requirements:: R001 R006 R010
Model:: VAL SNK C CD
Factor:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

WRAS Approval Number: #1906704

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1906704
Expiry date:: 30/06/2024
Size:: Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections
Marking:: Hansgrohe on front base of body
Installation Requirements:: R001 R006 R009 R010
Model:: 14 870 XXX Hansgrohe Talis S² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg
Country
Germany

View All Listings by this Company

WRAS Approval Number: #1905353

Range of single hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headwork with dome type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1905353
Expiry date:: 31/05/2024
Size:: Stainless steel braided EPDM lined hose assembly incorporating a 3/8” captive nut end connections.
Marking:: Kind logo on rear of body
Installation Requirements:: R001 R006 R010
Model:: JD-SK103** & JD-SK103-1**. ‘**’ denotes finish, and can be replaced with: C - Chrome, P - Polished, R - Rose Gold, T - Zirconium gold, G - Titanium gold, L - Lead, PB - Gun black, RS - Rose gold brushed, TS - Zirconium gold brushed, GS - Titanium gold brushed, LS - Lead brushed, BS - Black brushed, NS - Nickel brushed, RM - Rose gold Matt Satin, TM - Zirconium Matt Satin, GM - Titanium Matt Satin, LM - Lead Matt Satin, BM - Black Matt Satin, NM - Nickel Matt Satin, B - Matt black, A - Antique Brass, RA - Antique Copper, YA - Yellow Antique Brass, ORB - Oil rubbed bronze, W - White Polished, BP - Black Polished, CB - Matt Black & Chrome, CW - White & Chrome, GB - Matt Black & Gold or GW - White & Gold.
Manufacturer:: Guangzhou Kind Architecture Material Technology Co., Ltd.

Company Name
Guangzhou Kind Architecture Material Technology Co., Ltd.
Address
Unit 8 No 1 Dashadi West Huangpu District
Country
Guangzhou

View All Listings by this Company

WRAS Approval Number: #1905339

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1905339
Expiry date:: 31/05/2024
Note:: This approval is only for the tap and doesn’t include the reverse osmosis unit.
Size:: Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections.
Marking:: Kona (Geann Industrial Co. Ltd. logo) on body
Installation Requirements:: R001 R006 R010 R170
Model:: OZ-1000 Ozone.
Manufacturer:: Geann Industrial Co. Ltd.

Company Name
Geann Industrial Co. Ltd.
Address
29 Tou-Lun Lane, Tou-Lun Li, Lukang Town
Country
Changhua County,

View All Listings by this Company