Combination Tap Assemblies
Section Code 0450 : Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #1909099
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The products are supplied with a click type waste.
Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909099
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.
- Marking:
- NABIS ON OPERATING MEMBER
- Installation Requirements:
- R001 R006 R010
- Model:
-
A05028 NABIS BASIN MIXER
- Factor:
- WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT
WARWICK TECHNOLOGY PARK
WARWICK
Postcode
CV34 6DY
View All Listings by this Company
WRAS Approval Number: #1910903
Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Product is supplied with a click type pop up waste.
Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910903
- Expiry date:
- 31/10/2024
- Size:
- 15mm copper tails
- Marking:
- Bristan on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
J SMBAS C
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #1910319
Range of single hole, single outlet (fixed) combination tap assembly (chrome plated brass). Incorporating a single sequential ceramic disc headworks, and single lever operating members.
The spout outlet incorporates a plastic aerator. Inlets incorporate screwdriver operated servcing valves and have stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Maximum working pressure 10 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910319
- Expiry date:
- 31/10/2024
- Size:
- 15mm conmpression
- Marking:
- Twyford on operating member
- Installation Requirements:
- R001 R005 R009 R010
- Model:
-
SF5347CP
- Factor:
- Twyford Bathrooms (Geberit Service)
Company Name
Twyford Bathrooms (Geberit Service)
Address
Caledonian Building Services
Site 2 Off Ossington Road
Newark
Postcode
NG23 6NT
Phone
01270 879777
View All Listings by this Company - Manufacturer:
- Roco TR Banyo A.S
Company Name
Roco TR Banyo A.S
Address
View All Listings by this Company
WRAS Approval Number: #1910012
Range of single hole, single outlet (fixed) combination tap assemblies (black or chromium plated brass) incorporating a ceramic cartridge headwork with, single lever operating member. The spout outlet incorporates a plastic aerator.
The 100208340 & 100208350 models are supplied with a lever type pop-up waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910012
- Expiry date:
- 31/10/2024
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided, PEX lined flexible hose assemblies with ⅜” captive nut end connections and EPDM rubber washers.
- Marking:
- NK Porcelanosa on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
100208340,100208350,100208352,100208353,100208354, 100208355,100208362 & 100208373.
- Factor:
- Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal
Puebla de Arenoso CV 20 KM 2
Country
Spain
View All Listings by this Company
WRAS Approval Number: #1910019
Single hole, single outlet (fixed) combination tap assembly with a brass body (various finishes, see model) incorporating ceramic cartridge headwork, and single lever operating member. The spout outlet incorporates a rubber aerator
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910019
- Expiry date:
- 31/10/2024
- Size:
- Stainless steel braded thermoplastic silicone rubber (TPSiV) lined flexible hoses with ⅜” captive nut end connections
- Marking:
- Hansgrohe on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
31 931 xxx Hansgrohe Focus Single lever bath mixer Monotrou
Where xxx denotes the surface finish (which is a non-water contact part).
It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
- Manufacturer:
- Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9,
77761 Schiltach
Country
Germany
View All Listings by this Company
WRAS Approval Number: #1910039
Range of single hole single outlet floor mounted bath taps with chromium plated brass bodies incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a combined plastic aerator and plastic flow regulator.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910039
- Expiry date:
- 31/10/2024
- Size:
- 12.7mm Spigot.
- Marking:
- NK Porcelanosa on operating member.
- Installation Requirements:
- R001 R010 R040
- Model:
-
100208363 (Black)
100208374 (Chrome)
- Factor:
- Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
Carretera Villareal
Puebla de Arenoso CV 20 KM 2
Country
Spain
View All Listings by this Company
WRAS Approval Number: #1911301
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating self-closing headwork with a dome type operating member. Models also incorporate a straightner and metal back nuts.
Maximum operating pressure 3.0 bar. Cold water use only
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1911301
- Expiry date:
- 30/11/2024
- Size:
- 3/8" BSP (M)
- Marking:
- Special Taps logo ‘ST’ (S placed above the letter T) on body
- Installation Requirements:
- R001 R006
- Model:
-
105 push button tap
- Manufacturer:
- Special Taps Srl
Company Name
Special Taps Srl
Address
Via Delle Beulle 11
28010 Cavallirio
Italy
View All Listings by this Company
WRAS Approval Number: #1911322
Single hole, single outlet, fixed combination tap assembly (brass body with various finishes), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1911322
- Expiry date:
- 30/11/2024
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
- Marking:
- Crosswater 'X' logo on rear of body
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
ZR06_110x Basin Monobloc
Where x denotes finish and can be replaced by:
C = Chrome,
V = Stainless steel effect,
F = Brushed brass,
M = Matt Black,
A = Anthracite,
W = White,
B = Brushed Black Chrome,
N = Polished Nickel,
L = Brushed Nickel,
Q = Unlacquered Brass,
RG = Rose Gold,
BGR = Brushed Rose Gold,
P = Copper.
- Factor:
- Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House,
Rennie Drive,
Dartford.
Postcode
DA1 5FU
Phone
0845 873 8840
View All Listings by this Company
WRAS Approval Number: #1911909
Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a stainless-steel aerator.
Maximum operating pressure 5.0 bar. Maximum operating temperature 85°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1911909
- Expiry date:
- 30/11/2024
- Size:
- Stainless steel braided EPDM lined hose assemblies incorporating a ½”
captive nut end connections
- Marking:
- Bristan on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
GWF BASNW C
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #1910046
Range of single hole, single outlet (fixed) combination tap assemblies with chromium plated brass bodies. Incorporating a ¼ turn ceramic disc headworks and single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet.
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1910046
- Expiry date:
- 31/10/2024
- Size:
- ½” BSP (M)
- Marking:
- HUANRI on rear of tap body.
- Installation Requirements:
- R001 R006
- Model:
-
4005AG5
4005BD18
- Manufacturer:
- Zhejiang Huanri Sanitation Co Ltd
Company Name
Zhejiang Huanri Sanitation Co Ltd
Address
Xuanmen Industrial Zone,
Lupu Town
Yuhuan County
Zhejiang Province
Country
China
Phone
86 0576 87144858
View All Listings by this Company
Back To Directory Sections Page 8 of 58