Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

#2005515

'EP6700 (shore hardness 67), EP7500 (shore hardness 75) & EP8300 (shore hardness 83)'. Black coloured, compression moulded EPDM materials. Tested in-radius size 0.97mm. For use with water up to 23°C

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2005515
Expiry date:
31/05/2025
Approval Holder:
Caudenor S.L.
Company Name
Caudenor S.L.
Address
Polígono de Trascueto P A2/3 39600 Revilla De Camargo Cantabria
Country
Spain

View All Listings by this Company

Print This Approval

#2004529

'FOWRY-190920'. Black coloured, compression moulded EPDM rubber. Shore hardness 75. Tested in-radius size 3.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2004529
Expiry date:
30/04/2025
Approval Holder:
Fowry Tech.(Shandong) Co. Ltd.
Company Name
Fowry Tech.(Shandong) Co. Ltd.
Address
North End of Gongye 2 Road, Sangluoshu Industry Zone, Huimin County
Country
Binzhou City,

View All Listings by this Company

Print This Approval

#2007511

'JHSX-02'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2007511
Expiry date:
31/07/2025
Approval Holder:
Yingkou Jiahua Plastic New Tech. Co. Ltd.
Company Name
Yingkou Jiahua Plastic New Tech. Co. Ltd.
Address
Ba Yu Quan, Yingkou City, Liaoning Province
Country
P.R.China

View All Listings by this Company

Print This Approval

#2007518

'XX-02'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2007518
Expiry date:
31/07/2025
Approval Holder:
Yingkou Honghai Xinxin Rubber Product Co. Ltd.
Company Name
Yingkou Honghai Xinxin Rubber Product Co. Ltd.
Address
Plastic Industrial Park, Lutun, Yingkou Economic Development Zone, Yingkou City
Country
Liaoning,

View All Listings by this Company

Print This Approval

#2009505

'EPDM G7005'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2009505
Expiry date:
30/09/2025
Approval Holder:
Jeantet Elastomers
Company Name
Jeantet Elastomers
Address
6 Faubourge Des Moulins, BP 117, 39206 Saint Claude Cedex
Country
France
Phone
(33) 03 84 45 03 57 Fax: +33 3 8445 6666
General Email
jeantet@jeantet.com

View All Listings by this Company

Print This Approval

#2009519

'EP500'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2009519
Expiry date:
30/09/2025
Approval Holder:
Guarnimed Srl Unipersonale
Company Name
Guarnimed Srl Unipersonale
Address
Via Rossini 17/19, 24060 Creadro BG, Italy
Phone
+39 03509 51111
General Email
info@guarnimed.it

View All Listings by this Company

Print This Approval

#2009521

'YL-E-7010'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2009521
Expiry date:
30/09/2025
Approval Holder:
Hebei Youlian Rubber Products Co. Ltd.
Company Name
Hebei Youlian Rubber Products Co. Ltd.
Address
198 Fuqiang South Road, Zaoqiang County Hengshui, Hebei 053100
Country
China

View All Listings by this Company

Print This Approval

#2009522

'E7581'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2009522
Expiry date:
30/09/2025
Approval Holder:
Trelleborg Sealing Solutions Germany GmbH.
Company Name
Trelleborg Sealing Solutions Germany GmbH.
Address
Schockenriedstraße 1. 70565 Stuttgart
Country
Germany

View All Listings by this Company

Print This Approval

#2010525

'EP5700'. Black coloured, compression moulded EPDM material. Shore hardness 57. Tested in-radius size 0.98mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2010525
Expiry date:
31/10/2025
Approval Holder:
Caudenor S.L.
Company Name
Caudenor S.L.
Address
Polígono de Trascueto P A2/3 39600 Revilla De Camargo Cantabria
Country
Spain

View All Listings by this Company

Print This Approval

#2010548

'EP70B002'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2010548
Expiry date:
31/10/2025
Approval Holder:
Tianjin Lanbiao Rubber Co. Ltd.
Company Name
Tianjin Lanbiao Rubber Co. Ltd.

View All Listings by this Company

Print This Approval

#2010550

'DLYY E6202'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2010550
Expiry date:
31/10/2025
Approval Holder:
Dalian Yingyu Co., Ltd.
Company Name
Dalian Yingyu Co., Ltd.
Address
No.692, ZhongShan Road, ShaHeKou District, Dalian
Country
China

View All Listings by this Company

Print This Approval

#2012506

EP0E7001P-WRC. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012506
Expiry date:
31/12/2025
Approval Holder:
Best Ring Industrial Corporation
Company Name
Best Ring Industrial Corporation
Address
No 36 Lane 148 Li De St Chang Ho City
Country
235 Taipei Hsein
Phone
+886 2 32349977
General Email
bestring@bestring.com.tw

View All Listings by this Company

Print This Approval

#2009546

'E7131'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2009546
Expiry date:
30/09/2025
Approval Holder:
Ulman Dichtungstechnik GmbH
Company Name
Ulman Dichtungstechnik GmbH
Address
Max-Planck-Strasse 32, 71116 Gartringen
Country
Germany

View All Listings by this Company

Print This Approval

#2012511

'E7008W'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012511
Expiry date:
31/12/2025
Approval Holder:
Best Ring Technology Co. Ltd.
Company Name
Best Ring Technology Co. Ltd.

View All Listings by this Company

Print This Approval

#2012527

'EPDM PX Black SH 78'. Black coloured, injection moulded EPDM material. Shore hardness 78. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012527
Expiry date:
31/12/2025
Approval Holder:
Orobica Plast Gom Srl. a socio unico
Company Name
Orobica Plast Gom Srl. a socio unico
Address
Via P. Mascagni, 5-24060 Credaro (BG)
Country
Italy

View All Listings by this Company

Print This Approval

#2012525

‘EPDM-FF’. Black coloured, compression moulded EPDM rubber material. Shore hardness 80A. Tested in-radius size 0.89mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012525
Expiry date:
31/12/2025
Approval Holder:
Alfa Laval Lund AB
Company Name
Alfa Laval Lund AB
Address
PO Box 74, SE-22100, Lund
Country
Sweden

View All Listings by this Company

Print This Approval

#2012531

'TIMO-70'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.17mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012531
Expiry date:
31/12/2025
Approval Holder:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval

#2012532

'H600071'. Black coloured, compression moulded EPDM material. Shore hardness 55. Tested in-radius size 1.25mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012532
Expiry date:
31/12/2025
Approval Holder:
ARSAN KAUÇUK PLASTİK MAKİNE SANAYİİ VE TİCARET A.Ş.
Company Name
ARSAN KAUÇUK PLASTİK MAKİNE SANAYİİ VE TİCARET A.Ş.
Address
Ferizli OSB. 1. Cadde No:20/1, Ferizli, Sakarya
Country
Turkey

View All Listings by this Company

Print This Approval

#2012534

'51M6767'. Black coloured, injection moulded EPDM material. Shore hardness 67. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012534
Expiry date:
31/12/2025
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#2012537

'TWK3628'. Black coloured, injection moulded EPDM material. Shore hardness 67. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012537
Expiry date:
31/12/2025
Approval Holder:
Polymer-Technik Elbe GmbH
Company Name
Polymer-Technik Elbe GmbH
Address
Heuweg 5, 06886 Lutherstadt Wittenberg
Country
Germany
Phone
+49-3491-659-155

View All Listings by this Company

Print This Approval

#2012553

'EPDMprx'. Black coloured, injection moulded EPDM material. Shore hardness 78. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012553
Expiry date:
31/12/2025
Approval Holder:
CIPRIANI PHE SRL
Company Name
CIPRIANI PHE SRL
Address
Via Nassar, 46, 37026 Pescantina (VR)
Country
Italy
Phone
+39 045 6750065
General Email
info@cipriani-phe.com

View All Listings by this Company

Print This Approval

#2103503

'60 EPDM 334 black 60 ShA' (shore hardness 60) and '70 EPDM 335 black 70 ShA' (shore hardness 70). Black coloured compression moulded EPDM materials. Tested in-radius 1.07mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2103503
Expiry date:
31/03/2026
Approval Holder:
Freudenberg Sealing Technologies GmbH & Co KG
Company Name
Freudenberg Sealing Technologies GmbH & Co KG
Address
Division O-Rings & Boots, Oberwihl 4, 79733 Görwihl
Country
Germany
Phone
+49 7754 701-0

View All Listings by this Company

Print This Approval

#2007533

'EW-001'. Black coloured, compression moulded EPDM material. Shore hardness 65. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2007533
Expiry date:
31/07/2025
Approval Holder:
Bilge Kaucuk Makine Yedek Parca San Ic Ve Dis Tic LTD STI
Company Name
Bilge Kaucuk Makine Yedek Parca San Ic Ve Dis Tic LTD STI
Address
Hosab 10, Cadde No 8, Nilufer, Bursa
Country
Turkey

View All Listings by this Company

Print This Approval

#2109501

`H34-50 to H34-70’. Range of black coloured, compression moulded EPDM rubber materials with a shore hardness of between 50 & 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109501
Expiry date:
30/09/2026
Approval Holder:
Viant Elkhorn, Inc.
Company Name
Viant Elkhorn, Inc.
Address
248 West Centralia Street, Elkhorn, Wisconsin 53121
Country
USA
Phone
+1 262 7235470

View All Listings by this Company

Print This Approval

#2105501

'EP60-WAUK-FR'. Black coloured, compression moulded EPDM sheet material. Shore hardness 60. In-radius size 1.35mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2105501
Expiry date:
31/05/2026
Approval Holder:
ELASTOMEROS RIOJANOS, S.A.U. (ELASTORSA)
Company Name
ELASTOMEROS RIOJANOS, S.A.U. (ELASTORSA)
Address
Ctra. de Quel, 35, Apartado 48, 26580 Arnedo, La Rioja
Country
Spain

View All Listings by this Company

Print This Approval

#2011545

'EPDM FRM8550C'. Black coloured, compression moulded EPDM sheet material. Shore hardness 75. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2011545
Expiry date:
30/11/2025
Approval Holder:
Tianjin City Fengrunmei Rubber Products Co., Ltd.
Company Name
Tianjin City Fengrunmei Rubber Products Co., Ltd.
Address
No.46-1 Zhenghe Road, Beizhakou Town, Jinnan District, Tianjin
Country
China

View All Listings by this Company

Print This Approval

#2105506

‘EPDM 825-c’. Black coloured, compression moulded EPDM sheet material. Shore hardness 80 A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2105506
Expiry date:
31/05/2026
Approval Holder:
Ein Shemer Rubber Industries A.C.A. Ltd
Company Name
Ein Shemer Rubber Industries A.C.A. Ltd
Address
D.N. Hefer 38816 Kibbutz Ein-Shemer
Country
Israel

View All Listings by this Company

Print This Approval

#2106506

'EP210107'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106506
Expiry date:
30/06/2026
Approval Holder:
Vortex Qingdao Pipe Fitting Co., Ltd.
Company Name
Vortex Qingdao Pipe Fitting Co., Ltd.
Address
No.4, chongxiang Road, Lancun Town, Jimo District, Qingdao, Shandong Province
Country
China

View All Listings by this Company

Print This Approval

#2106515

'OYRTEP7011PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106515
Expiry date:
30/06/2026
Approval Holder:
Toyokawa (Jinan) Machinery Co., Ltd.
Company Name
Toyokawa (Jinan) Machinery Co., Ltd.
Address
Xiuyuan Road, Zhangqiu, Jinan city
Country
China

View All Listings by this Company

Print This Approval

#2106518

'ZF-73'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106518
Expiry date:
30/06/2026
Approval Holder:
Wuxi Tongjiang Ruifeng Valve Seals Co.,Ltd.
Company Name
Wuxi Tongjiang Ruifeng Valve Seals Co.,Ltd.
Address
Building 20, No. 35 Yanqiao Road, Yanqiao street, Huishan district, Wuxi City, Jiangsu Province
Country
China

View All Listings by this Company

Print This Approval

#2106538

‘0250-35 (50A), 0260-35 (60A), 0270-44 (70A), 0280-22 (80A) and 0290-11 (90A)’. Black coloured, compression moulded EPDM materials. Shore hardness between 50A & 90A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106538
Expiry date:
30/06/2026
Approval Holder:
Industrial Rubber Ltd.
Company Name
Industrial Rubber Ltd.
Address
4 Fielder Drive, Newgate Lane Industrial Estate, Fareham, Hampshire
Postcode
PO14 1JE
Phone
01329 287955
General Email
info@industrial-rubber.com

View All Listings by this Company

Print This Approval

#2106543

‘5052911193 (50A), 5062911233 (60A), 5072911255 (70A), 5082911184 (80A) and 5092911126 (90A)’. Black coloured, compression moulded EPDM materials. Shore hardness between 50A & 90A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106543
Expiry date:
30/06/2026
Approval Holder:
Clwyd compounders Ltd.
Company Name
Clwyd compounders Ltd.
Address
1 Elm Point, Abbey Road North, Wrexham
Postcode
LL13 9UE

View All Listings by this Company

Print This Approval

#2108502

‘EW45, EW50, EW53, EW54, EW54W, EW55, EW60, EW65, EW70, EW75, EW80, EW81 & EW85’. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 45 & 85. Tested in-radius size 1.4mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108502
Expiry date:
31/08/2026
Approval Holder:
VIP Polymers Ltd.
Company Name
VIP Polymers Ltd.
Address
15 Windover Road, Huntingdon, Cambridgeshire
Postcode
PE29 7EB
Phone
01480 411 333
General Email
info@vip-polymers.com

View All Listings by this Company

Print This Approval

#2107558

'CEW50, CEW55, CEW60, CEW65, CEW70, CEW75, CEW80, CEW85 & CEW88'. Black coloured, transfer moulded EPDM rubber materials. Shore hardness between 50 & 88. Tested in-radius size 1.15mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2107558
Expiry date:
31/07/2026
Approval Holder:
VIP-Polymers (Shanghai) Ltd.
Company Name
VIP-Polymers (Shanghai) Ltd.
Address
No 196, Yang Guang Da Dao, Xinwu Economic Development Zone, Wuhu County Wuhu
Country
China

View All Listings by this Company

Print This Approval

#2107559

'CVE45, CVE48, CVE50, CVE52, CVE55, CVE60, CVE61, CVE65, CVE69, CVE70, CVE75, CVE78 & CVE80'. Black coloured, extruded, EPDM materials. Shore hardness between 45 & 80. Tested in-radius size 1.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2107559
Expiry date:
31/07/2026
Approval Holder:
VIP Polymers Ltd.
Company Name
VIP Polymers Ltd.
Address
15 Windover Road, Huntingdon, Cambridgeshire
Postcode
PE29 7EB
Phone
01480 411 333
General Email
info@vip-polymers.com

View All Listings by this Company

Print This Approval

#2012564

'51M5567'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 0.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012564
Expiry date:
31/12/2025
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#2108512

‘AquaFlex® T 5818’. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108512
Expiry date:
31/08/2026
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2108518

'AquaFlex T 5817'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108518
Expiry date:
31/08/2026
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2106547

'RVK EPDM EP 210107'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106547
Expiry date:
30/06/2026
Approval Holder:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
PLOT 1B20,INDUSTRIAL VALLEY KING ABDULLAH ECONOMIC CITY RABIGH, JEDDAH 21911
Country
Saudi Arabia

View All Listings by this Company

Print This Approval

#2012565

'TYT_001'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 0.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012565
Expiry date:
31/12/2025
Approval Holder:
Wuxi Woco Motor Acoustic Systems Co. Ltd.
Company Name
Wuxi Woco Motor Acoustic Systems Co. Ltd.
Address
No. 100 Xi Mei Road, National High-Tech Industrial Development Zone, PC 214112, Wuxi, Province Jiangsu
Country
China

View All Listings by this Company

Print This Approval

#2012566

'TWK4563'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 0.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012566
Expiry date:
31/12/2025
Approval Holder:
Polymer-Technik Elbe GmbH
Company Name
Polymer-Technik Elbe GmbH
Address
Heuweg 5, 06886 Lutherstadt Wittenberg
Country
Germany
Phone
+49-3491-659-155

View All Listings by this Company

Print This Approval

#2109505

'E0265'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. Between September 2021 and 3rd August 2022, the material was for use with water up to 23°C. Between 4th August 2022 and September 2026, the material is for use with water up to 50°C

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109505
Expiry date:
30/09/2026
Approval Holder:
Semperit Technische Produkte GmbH
Company Name
Semperit Technische Produkte GmbH
Address
Triester Bundesstrasse 26, A-2632 Wimpassing im Schwarzatale
Country
Austria
Phone
+43 2630 310 0 Fax: +43 2630 475
General Email
office@semperit.at

View All Listings by this Company

Print This Approval

#2012568

'S-9028'. Black coloured, compression moulded EPDM rubber material Shore hardness 60 ShA. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012568
Expiry date:
31/12/2025
Approval Holder:
Amiantit Rubber Industries Ltd
Company Name
Amiantit Rubber Industries Ltd
Address
PO Box 589 Damman 31421 Saudi Arabia
Phone
Tel: +966 3 8571160/8571164 Fax: +966 3 8573200

View All Listings by this Company

Print This Approval

#2111506

'EBW-65'. Black coloured, compression moulded EPDM rubber material. Shore hardness 65. Tested in-radius size 0.98mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111506
Expiry date:
30/11/2026
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2107571

'E701/A'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2107571
Expiry date:
31/07/2026
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval

#2109544

'RCI EP 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 0.95mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109544
Expiry date:
30/09/2026
Approval Holder:
Rubber Craft Industries
Company Name
Rubber Craft Industries
Address
J-294, Indaryani Nagar, MIDC Bhosari, Pune - 411026
Country
India

View All Listings by this Company

Print This Approval

#2102542

'EP 70110 HC'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2102542
Expiry date:
28/02/2026
Approval Holder:
Zenith Industrial Rubber Products Pvt. Ltd.
Company Name
Zenith Industrial Rubber Products Pvt. Ltd.
Address
141/144, 14th Floor, Free Press House, Free Press Journal Marg, 215 Nariman Point, Mumbai - 400 021
Country
India

View All Listings by this Company

Print This Approval

#2103559

'0713.17/55 (shore hardness 55) & 0713.17/70 (shore hardness 70)'. Black coloured, compression moulded EPDM rubber materials. Tested in-radii size 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2103559
Expiry date:
31/03/2026
Approval Holder:
Luebke & Vogt. GmbH & Co. KG
Company Name
Luebke & Vogt. GmbH & Co. KG
Address
Hustener Strasse 43 - 45, D - 59846 Sundern, Germany

View All Listings by this Company

Print This Approval

#2110525

'QC'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110525
Expiry date:
31/10/2026
Approval Holder:
Tianjin Qichang Valve Co. Ltd
Company Name
Tianjin Qichang Valve Co. Ltd
Address
16 Huoju Road Beizhakou Economic Development Zone Jinnan District
Country
Tianjin

View All Listings by this Company

Print This Approval

#2106549

'HYPRESS12V'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.1mm. Between June 2021 and August 2022, the material was for use with water up to 23°C. Between September 2022 and June 2026, the material is for use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106549
Expiry date:
30/06/2026
Approval Holder:
HYPRESS RUBBER MFG. CO.
Company Name
HYPRESS RUBBER MFG. CO.
Address
Gat no. 323, Plot No. 2, VILLAGE SHINDEWADI – SHIRWAL, TALUKA – KHANDALA DISTRICT – SATARA, PIN - 412801 MAHARASHTRA
Country
India

View All Listings by this Company

Print This Approval

#2103560

'EPDM BW 5920 D 50'. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2103560
Expiry date:
31/03/2026
Approval Holder:
Prabhat Elastomers Pvt. Ltd.
Company Name
Prabhat Elastomers Pvt. Ltd.
Address
'Prabhat Bhavan', 96 L.B.S. Marg, Vikhroli West, Mumbai, Maharashtra 400083
Country
India
Phone
+91 22 3294 6102
General Email
prabhatin@vsnl.com

View All Listings by this Company

Print This Approval

#2109552

'S/EP-50, S/EP-60, S/EP-70 & S/EP-80'. Black coloured, compression moulded EPDM materials with a shore hardness of between 50A & 80A. Tested in-radius size 1.05mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109552
Expiry date:
30/09/2026
Approval Holder:
Waheguru Rubber Manufacturing Co. (P) Ltd
Company Name
Waheguru Rubber Manufacturing Co. (P) Ltd
Address
732/A, Delhi Road, Post Office - Belumilki, Dist. - Hooghly, West Bengal - 712223
Country
India

View All Listings by this Company

Print This Approval

#2106550

'ILPEA 70-90 EPDM COMPOUND WRAS AF'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.25mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106550
Expiry date:
30/06/2026
Approval Holder:
Industrie ILPEA spa
Company Name
Industrie ILPEA spa
Address
Viale Industrie, 887, 21020 Malgesso (VA)
Country
Italy

View All Listings by this Company

Print This Approval

#2108540

'EPDM-W E267'. Black coloured, compression moulded EPDM material. Shore hardness 80A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108540
Expiry date:
31/08/2026
Approval Holder:
Alfa Laval Lund AB
Company Name
Alfa Laval Lund AB
Address
PO Box 74, SE-22100, Lund
Country
Sweden

View All Listings by this Company

Print This Approval

#2102544

'Coru177'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2102544
Expiry date:
28/02/2026
Approval Holder:
Accrasystem Ltd. T/A Coruba
Company Name
Accrasystem Ltd. T/A Coruba
Address
Units 28-30 Purdeys Way, Rochford, Essex
Postcode
SS4 1ND

View All Listings by this Company

Print This Approval

#2102545

'SM177'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2102545
Expiry date:
28/02/2026
Approval Holder:
Accrasystem Ltd. T/A Metroseal
Company Name
Accrasystem Ltd. T/A Metroseal
Address
Unit 28-30 Purdeys Way, Rochford, Essex
Postcode
SS4 1ND

View All Listings by this Company

Print This Approval

#2111513

'Hongli IRHD50'. Black coloured, press moulded EPDM material. Shore hardness 50. Tested in-radius size 1.12mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111513
Expiry date:
30/11/2026
Approval Holder:
Maanshan Hongli Rubber Products Co., Ltd.
Company Name
Maanshan Hongli Rubber Products Co., Ltd.
Address
No. 226 Xinhua Road, HuaShan Area, Maanshan City, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#2111516

'A-KT 70-00'. Black coloured, extruded and rotocured EPDM rubber material. Shore hardness 70. Tested in-radius size 1.00mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111516
Expiry date:
30/11/2026
Approval Holder:
Holcim Technical Solutions and Products GmbH
Company Name
Holcim Technical Solutions and Products GmbH
Address
Fred-Joachim-Schoeps-Str. 55, 68535 Edingen-Neckarhausen, Germany

View All Listings by this Company

Print This Approval

#2112507

'Sunaflex T 8289'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2112507
Expiry date:
31/12/2026
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2110541

'LC 50-90'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.33mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110541
Expiry date:
31/10/2026
Approval Holder:
Comet Srl
Company Name
Comet Srl
Address
Via Fogliano, Trav I, 12, 25030 Coccaglio (BS)
Country
Italy
Phone
+39 035 933535
General Email
comet@cometsre.com

View All Listings by this Company

Print This Approval

#2111525

'Sunaflex T 8157'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111525
Expiry date:
30/11/2026
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2204501

'EP50, EP55, EP60, EP65, EP70, EP75 & EP80'. Black coloured, transfer moulded EPDM material. Shore hardness between 50 & 80. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204501
Expiry date:
30/04/2027
Approval Holder:
VIP Polymers Ltd.
Company Name
VIP Polymers Ltd.
Address
15 Windover Road, Huntingdon, Cambridgeshire
Postcode
PE29 7EB
Phone
01480 411 333
General Email
info@vip-polymers.com

View All Listings by this Company

Print This Approval

#2110545

'Athena-EPDM-XX70'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.33mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110545
Expiry date:
31/10/2026
Approval Holder:
Athena SpA
Company Name
Athena SpA
Address
Via delle Albere 13, 36045 Alonte (Vicenza)
Country
Italy

View All Listings by this Company

Print This Approval

#2110547

'AS-IS'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110547
Expiry date:
31/10/2026
Approval Holder:
Die Erste Industry Co., Ltd.
Company Name
Die Erste Industry Co., Ltd.
Address
1F, Building 5m No. 58 Xutang Road, Songjiang District, Shanghai
Country
China

View All Listings by this Company

Print This Approval

#2112518

'EPDM60BKFG, EPDM65BKFG, EPDM70BKFG, EPDM75BKFG & EPDM80BKFG'. Black coloured, compression moulded EPDM rubbers. Shore hardness between 60A & 80A. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2112518
Expiry date:
31/12/2026
Approval Holder:
Kesaria Rubber Industries Pvt. Ltd.
Company Name
Kesaria Rubber Industries Pvt. Ltd.
Address
Binola Industrial Area, VPO Bhoda Kalan, 57/58 KM Stone, NH-8, Gurgaon, 122413, Haryana
Country
India

View All Listings by this Company

Print This Approval

#2201521

0713.23/60 (shore hardness 60A). 0713.23/65 (shore hardness 65A). 0713.23/70 (shore hardness 70A). 0713.23/75 (shore hardness 75A). 0713.23/80 (shore hardness 80A). 0713.23/85 (shore hardness 85A). Black coloured, compression moulded EPDM rubber materials. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2201521
Expiry date:
31/01/2027
Approval Holder:
Luebke & Vogt. GmbH & Co. KG
Company Name
Luebke & Vogt. GmbH & Co. KG
Address
Hustener Strasse 43 - 45, D - 59846 Sundern, Germany

View All Listings by this Company

Print This Approval

#2201525

'E2532'. Black coloured, compression moulded EPDM material. Shore hardness 55. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2201525
Expiry date:
31/01/2027
Approval Holder:
Semperit Technische Produkte GmbH
Company Name
Semperit Technische Produkte GmbH
Address
Triester Bundesstrasse 26, A-2632 Wimpassing im Schwarzatale
Country
Austria
Phone
+43 2630 310 0 Fax: +43 2630 475
General Email
office@semperit.at

View All Listings by this Company

Print This Approval

#2007539

'JSP/SF-02'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2007539
Expiry date:
31/07/2025
Approval Holder:
Jilin Senfeng Pipe Co. Ltd.
Company Name
Jilin Senfeng Pipe Co. Ltd.
Address
B-1 Jiancaijiayuan Fukang Road (132300) Panshi City Jilin Province
Country
China
Phone
86 432 65612291

View All Listings by this Company

Print This Approval

#2108542

`SACHDEVA/EPDM-80`. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108542
Expiry date:
31/08/2026
Approval Holder:
Sachdeva Metal Works
Company Name
Sachdeva Metal Works
Address
C-33, Focal Point Extension, Jalandhar, Punjab, 144004
Country
India

View All Listings by this Company

Print This Approval

#2106552

'E300'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106552
Expiry date:
30/06/2026
Approval Holder:
Hengshui Chuangcheng Sealing Technology Co., Ltd
Company Name
Hengshui Chuangcheng Sealing Technology Co., Ltd
Address
North of Sanlizhuang Village, East Yafu Road, Jingxian County
Country
China

View All Listings by this Company

Print This Approval

#2112526

'EPNE-50'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2112526
Expiry date:
31/12/2026
Approval Holder:
National Engineering Industries Ltd.
Company Name
National Engineering Industries Ltd.
Address
2 Beerpara Lane, Dum Dum, Kolkata 700030
Country
India

View All Listings by this Company

Print This Approval

#2202549

'EWDRI 50, EWDRI 55, EWDRI 60, EWDRI 65, EWDRI 70 & EWDRI 80'. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 50 & 80. Tested in-radius size 0.69mm. 'EWDRI 50' is for use with water up to 70°C. 'EWDRI 55, EWDRI 60, EWDRI 65, EWDRI 70 & EWDRI 80' are for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2202549
Expiry date:
28/02/2027
Approval Holder:
Deesawala Rubber Industries
Company Name
Deesawala Rubber Industries
Address
5-5-65/S12A, S.A. Trade Centre, Ranigunj 'X' Road, Secunderabad, Pin-500003, Telengana
Country
India

View All Listings by this Company

Print This Approval

#2108543

'ESW-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108543
Expiry date:
31/08/2026
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2112530

'E51-70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.02mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2112530
Expiry date:
31/12/2026
Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval

#2204504

'EUW-75'. Black coloured, compression moulded EPDM rubber material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204504
Expiry date:
30/04/2027
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2204505

'EUW-80'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204505
Expiry date:
30/04/2027
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2204506

'EUW-60'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 0.9mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204506
Expiry date:
30/04/2027
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2204519

'JJSXEPDMIRHD50 (shore hardness 50) & JJSXEPDMIRHD70 (shore hardness 70)'. Black coloured, compression moulded EPDM materials. Tested in-radius size 0.99mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204519
Expiry date:
30/04/2027
Approval Holder:
JingJiang SanXing Rubber Products Co. Ltd.
Company Name
JingJiang SanXing Rubber Products Co. Ltd.
Address
No. 10, West ZhongZhou Road, JingJiang City, JiangSu Province
Country
China

View All Listings by this Company

Print This Approval

#2204523

'VL1713M266B Black'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 1.02mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204523
Expiry date:
30/04/2027
Approval Holder:
Vernay Laboratories Inc
Company Name
Vernay Laboratories Inc
Address
120E South College Street Yellow Springs Ohio 45387
Country
USA
Phone
Tel: +1 937 7677261 Fax: +1 937 7677913

View All Listings by this Company

Print This Approval

#2204526

‘AA9HWZ (88 Sh.)’. Grades ‘AA6HWZ (60 Sh.), AA7HWZ (70 Sh.), AA7SWZ (70 Sh.), AA8HWZ (80 Sh.) were added in December 2022. Black coloured, compression moulded EPDM sheet materials. With a shore hardness of between 60 & 88. Tested in-radius size 1.15mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204526
Expiry date:
30/04/2027
Approval Holder:
Gummiwerk Kraiburg GmbH & Co
Company Name
Gummiwerk Kraiburg GmbH & Co
Address
Teplitzer Strasse 20, D-84478 Waldkraiburg
Country
Germany
Phone
+49 8638 610 Fax: +49 8638 61310

View All Listings by this Company

Print This Approval

#2105527

'EPDM G7503'. Black coloured, injection moulded EPDM rubber material. Shore hardness 75. Tested in-radius size 1.1mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2105527
Expiry date:
31/05/2026
Approval Holder:
Jeantet Elastomers
Company Name
Jeantet Elastomers
Address
6 Faubourge Des Moulins, BP 117, 39206 Saint Claude Cedex
Country
France
Phone
(33) 03 84 45 03 57 Fax: +33 3 8445 6666
General Email
jeantet@jeantet.com

View All Listings by this Company

Print This Approval

#2205535

'TIMO 7 NC-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205535
Expiry date:
31/05/2027
Approval Holder:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval

#2204534

'AES-2/EPDM-50'. Black coloured, compression moulded EPDM sheet material. Shore hardness 50. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204534
Expiry date:
30/04/2027
Approval Holder:
Allianz Elastomer OPP - Samarpan Lamination
Company Name
Allianz Elastomer OPP - Samarpan Lamination
Address
Rajpar Road, At-Sanala, Morbi - 363641
Country
India

View All Listings by this Company

Print This Approval

#2205542

'AEH-5/EPDM-80'. Black coloured, compression moulded EPDM material. Shore hardness 80.Tested in-radius size 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205542
Expiry date:
31/05/2027
Approval Holder:
Allianz Elastomer OPP - Samarpan Lamination
Company Name
Allianz Elastomer OPP - Samarpan Lamination
Address
Rajpar Road, At-Sanala, Morbi - 363641
Country
India

View All Listings by this Company

Print This Approval

#2209502

'EP701253C'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2209502
Expiry date:
30/09/2027
Approval Holder:
Fannteer Corporation
Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

Print This Approval

#2205545

'E2514'. Black coloured, compression moulded EPDM rubber. Shore hardness 67. Tested in-radius size 1.03mm. For use with water up to 60°C,

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205545
Expiry date:
31/05/2027
Approval Holder:
Semperit Technische Produkte GmbH
Company Name
Semperit Technische Produkte GmbH
Address
Triester Bundesstrasse 26, A-2632 Wimpassing im Schwarzatale
Country
Austria
Phone
+43 2630 310 0 Fax: +43 2630 475
General Email
office@semperit.at

View All Listings by this Company

Print This Approval

#2206508

'AA7LNZ'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2206508
Expiry date:
30/06/2027
Approval Holder:
Gummiwerk Kraiburg GmbH & Co
Company Name
Gummiwerk Kraiburg GmbH & Co
Address
Teplitzer Strasse 20, D-84478 Waldkraiburg
Country
Germany
Phone
+49 8638 610 Fax: +49 8638 61310

View All Listings by this Company

Print This Approval

#2111541

'XR0240012'. Black coloured, compression moulded EPDM material. Shore hardness 40. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111541
Expiry date:
30/11/2026
Approval Holder:
Changtai Sinrun Rubber-Plastic Co. Ltd.
Company Name
Changtai Sinrun Rubber-Plastic Co. Ltd.
Address
Xingtai Development Zones, Changtai county, Zhangzhou, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#2109564

'EPDM 69064340'. Black coloured, injection moulded EPDM sheet material. Shore hardness 57. Tested in-radius size 0.9mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109564
Expiry date:
30/09/2026
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2203549

'XXE03'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2203549
Expiry date:
31/03/2027
Approval Holder:
Xingtai Rubber Factory
Company Name
Xingtai Rubber Factory
Address
No. 175 North Xingzhou Road, Xingtai City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval

#2105528

'RE EP/50, 'RE EP/60, 'RE EP/70 & RE EP/80'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2105528
Expiry date:
31/05/2026
Approval Holder:
Royal Elastomers Pvt. Ltd.
Company Name
Royal Elastomers Pvt. Ltd.
Address
Khasra No.550,549/1,534/3, Village- Kandarka, Ahiwara Road, Post: Kumhari, Dist: Durg, Chhattisgarh, 490042
Country
India

View All Listings by this Company

Print This Approval

#2206516

'EP50'. Black coloured, compression moulded EPDM material. Shore hardness 50A. Tested in-radius size 0.97mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2206516
Expiry date:
30/06/2027
Approval Holder:
Umm Al Quwain Rubber Industries Ltd (URIL)
Company Name
Umm Al Quwain Rubber Industries Ltd (URIL)
Address
PO Box 79, Umm Al Quwain
Country
United Arab Emirates
Phone
Tel: +791 6671320 Fax: +791 6671221

View All Listings by this Company

Print This Approval

#2207519

'D0012'. Black coloured, EPDM rubber material manufactured by vulcanised moulding. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2207519
Expiry date:
31/07/2027
Approval Holder:
Rong Sheng Long Rubber Sealing Article Company Limited of Foshan City
Company Name
Rong Sheng Long Rubber Sealing Article Company Limited of Foshan City
Address
Beside of Beihua Road, Tandong Industrial Zone Shunde District, Foshan City, Guangdong Province
Country
China

View All Listings by this Company

Print This Approval

#2303500

'HW-EPDM SH 50'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303500
Expiry date:
31/03/2028
Approval Holder:
Holdwell Components Private Ltd.
Company Name
Holdwell Components Private Ltd.
Address
Plot No. 64-A, Sector-C, Urla Industrial Area, Raipur, Chhattisgarh
Postcode
492003
Country
India

View All Listings by this Company

Print This Approval

#2210503

'EP01961PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210503
Expiry date:
31/10/2027
Approval Holder:
Chang Horing Rubber Co., Ltd.
Company Name
Chang Horing Rubber Co., Ltd.
Address
No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien
Country
Taiwan
Phone
+886 4 7810868

View All Listings by this Company

Print This Approval

#2108547

'CVE78'. Black coloured, extruded EPDM material. Shore hardness 80. Tested in-radius size 10.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2108547
Expiry date:
31/08/2026
Approval Holder:
VIP Polymers Ltd.
Company Name
VIP Polymers Ltd.
Address
15 Windover Road, Huntingdon, Cambridgeshire
Postcode
PE29 7EB
Phone
01480 411 333
General Email
info@vip-polymers.com

View All Listings by this Company

Print This Approval

#2302500

‘EWA 12150 (EW48) Rev.1. EWA 12155A (EP55) Rev.1. EWA 12160A (EW 60) Rev.1. EWA 12165 (EW65 2GS) Rev.1. EWA 12170 (WRC 70) Rev.1. EWA 12175 (WRC 75) Rev.1. EWA 12180 (EW80) Rev.1’. Black coloured, compression moulded, EPDM sheet materials. Shore hardness between 50 & 80. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302500
Expiry date:
29/02/2028
Approval Holder:
Andhra Polymers Pvt.Ltd.,
Company Name
Andhra Polymers Pvt.Ltd.,
Address
Plot No.2, Phase-V IDA, Jeedimetla, Hyderabad 500 055
Country
India

View All Listings by this Company

Print This Approval

#2206535

'EPH-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2206535
Expiry date:
30/06/2027
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2208535

‘KRE 60 (103), KRE 65 (100) & KRE 65 (106)’. In September 2022 ‘KRE 60 (104)’ was added to the approval. Black coloured, compression moulded EPDM rubber materials. Shore hardness 60 & 65. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2208535
Expiry date:
31/08/2027
Approval Holder:
Kowa Rubber Industries Co., Ltd.
Company Name
Kowa Rubber Industries Co., Ltd.
Address
2243 Ogawara, Suzaka-shi, Nagano, 382-0005
Country
Japan
Phone
+81 26 2469123

View All Listings by this Company

Print This Approval

#2208545

'TIMO 3-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2208545
Expiry date:
31/08/2027
Approval Holder:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval

#2303502

'EX60LC, EX70LC & EX80LC'. Black coloured, compression moulded EPDM rubber materials. Shore hardness 60, 70 & 80. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303502
Expiry date:
31/03/2028
Approval Holder:
A.T. Gomma Guarnizioni Industriali Srl
Company Name
A.T. Gomma Guarnizioni Industriali Srl
Address
Via Mearolo 3/D, 24060 Foresto Sparso (BG), Italy
Phone
+39 035 930254

View All Listings by this Company

Print This Approval

#2208562

'HT5697-5'. Black coloured, injection moulded EPDM material. Shore hardness 67. Tested in-radius size 1.0mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2208562
Expiry date:
31/08/2027
Approval Holder:
Terramix SA/Hultec
Company Name
Terramix SA/Hultec
Address
De Empaques Santa Ana 150 M Este Y 125 M Sur Pozos De Santa Ana
Country
San Jose, Costa Rica
Phone
Tel: +506 2829900 Fax: +506 2822514

View All Listings by this Company

Print This Approval

#2208572

Black coloured, compression moulded EPDM materials with a tested in-radius size of 1.3mm. 'EPW-50, EPW-55, EPW-60, EPW-65, EPW-70 & EPW-75' have a shore hardness of between 50 & 75 and are for use with water up to 23°C. ‘EPW-80' has a shore hardness of 80 and is suitable for use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2208572
Expiry date:
31/08/2027
Approval Holder:
Vajra Rubber Products Pvt. Ltd.
Company Name
Vajra Rubber Products Pvt. Ltd.
Address
Regd. Office XII/371A, Pyngode, Konathakunnu PO, Thrissur District, Kerala, Pin-680 123
Country
India

View All Listings by this Company

Print This Approval

#2210506

'EH600-151'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210506
Expiry date:
31/10/2027
Approval Holder:
Chi-Yih Enterprise Co., Ltd.
Company Name
Chi-Yih Enterprise Co., Ltd.
Address
No 93, Lane 245, Section 3 Sha-Tien Road Ta-Tu 432 Taichung
Country
Taiwan
Phone
+88 6426 996 802
General Email
eric@chiyih.com

View All Listings by this Company

Print This Approval

#2110559

'H600042'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.3mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110559
Expiry date:
31/10/2026
Approval Holder:
ARSAN KAUÇUK PLASTİK MAKİNE SANAYİİ VE TİCARET A.Ş.
Company Name
ARSAN KAUÇUK PLASTİK MAKİNE SANAYİİ VE TİCARET A.Ş.
Address
Ferizli OSB. 1. Cadde No:20/1, Ferizli, Sakarya
Country
Turkey

View All Listings by this Company

Print This Approval

#2209516

'Hongli IRHD 70'. Black coloured, press moulded EPDM material. Shore hardness 70. Tested in-radius size 1.09mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2209516
Expiry date:
30/09/2027
Approval Holder:
Maanshan Hongli Rubber Products Co., Ltd.
Company Name
Maanshan Hongli Rubber Products Co., Ltd.
Address
No. 226 Xinhua Road, HuaShan Area, Maanshan City, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#2302506

‘EWA 12150 (EW48) Rev.1. EWA 12155A (EP55) Rev.1. EWA 12160A (EW 60) Rev.1. EWA 12165 (EW65 2GS) Rev.1. EWA 12170 (WRC 70) Rev.1. EWA 12175 (WRC 75) Rev.1. EWA 12180 (EW80) Rev.1’. Black coloured, compression moulded, EPDM sheet materials. Shore hardness between 50 & 80. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302506
Expiry date:
29/02/2028
Approval Holder:
Polytech Industries LLC
Company Name
Polytech Industries LLC
Address
Al Hamra Industrial Zone (earlier RAKIA Industrial Zone) WIZ-04, WH 25-28, Al Jazira, Al Hamra, Al Khaimah
Country
United Arab Emirates
Phone
+971 7 2434951
General Email
admin@polytechindustries.ae

View All Listings by this Company

Print This Approval

#2201538

‘SBPEP4555 (50), SBPEP55 (55), SBPEP60 (60), SBPEP65 (65), SBPEP70 (70), SBPEP75 (75) & SBPEP7085 (80)’. Black coloured, compression moulded EPDM rubber sheet materials with a shore hardness of between 50 & 80. Tested in-radius size of 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2201538
Expiry date:
31/01/2027
Approval Holder:
Shree Balaji Polytech Products PVT Ltd.
Company Name
Shree Balaji Polytech Products PVT Ltd.
Address
Fortuna Tower, 23A Netaji Subhas Road, 1st Floor, Room No. 27
Country
Kolkata-700 001,

View All Listings by this Company

Print This Approval

#2210507

'E6083AA'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210507
Expiry date:
31/10/2027
Approval Holder:
Ge Mao Rubber Industrial Co. Ltd.
Company Name
Ge Mao Rubber Industrial Co. Ltd.
Address
No15, Kung-Yeh East 4th Road, Lu-Kang, Chang Hua, Taiwan
Country
China
Phone
+886 4781 0288 Fax: +886 4781 0289

View All Listings by this Company

Print This Approval

#2209530

'EPDM C12251'. Black coloured, compression moulded, EPDM rubber material. Shore hardness 77. Tested in-radius size 12.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2209530
Expiry date:
30/09/2027
Approval Holder:
KSB SAS
Company Name
KSB SAS
Address
Zone Industriale de Gagnaire Fonseche, 24490 LA ROCHE CHALAIS
Country
France
Phone
(+33) 553 92 44 00

View All Listings by this Company

Print This Approval

#2210508

'EP601289C'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210508
Expiry date:
31/10/2027
Approval Holder:
Fannteer Corporation
Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

Print This Approval

#2209538

'KRE70 (80-3)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2209538
Expiry date:
30/09/2027
Approval Holder:
Kowa Rubber Industries Co., Ltd.
Company Name
Kowa Rubber Industries Co., Ltd.
Address
2243 Ogawara, Suzaka-shi, Nagano, 382-0005
Country
Japan
Phone
+81 26 2469123

View All Listings by this Company

Print This Approval

#2210510

'EP6007K'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210510
Expiry date:
31/10/2027
Approval Holder:
Progum Elastomer Technology Co., Ltd.
Company Name
Progum Elastomer Technology Co., Ltd.
Address
5F-9, No 258 Liancheng Road, Jhonghe District, New Taipei City 23553
Country
Taiwan

View All Listings by this Company

Print This Approval

#2210516

'EC-6509-A'. Black coloured, compression moulded EPDM rubber material. Shore hardness 65. Tested in-radius size 0.5mm. For use with water up to 80°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210516
Expiry date:
31/10/2027
Approval Holder:
DiaCom Corporation
Company Name
DiaCom Corporation
Address
5 Howe Drive, Amherst, NH 03031
Country
USA
Phone
(001) 603-880-1900
General Email
dereks@diacom.com

View All Listings by this Company

Print This Approval

#2208598

'EP62/75'. Black coloured, compression moulded EPDM 'O' ring. Shore hardness 75. Tested in-radius size 3.5. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2208598
Expiry date:
31/08/2027
Approval Holder:
James Walker & Co Ltd (Cockermouth)
Company Name
James Walker & Co Ltd (Cockermouth)
Address
Compression Packing Laboratory Gote Brow Cockermouth
Postcode
CA13 0NH
Country
Cumbria
Phone
+ 44 (0)1900 823555 Fax: 01900 827138 Telex: 64168
General Email
cockermouth@jameswalker.biz

View All Listings by this Company

Print This Approval

#2210521

'XR0270012'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210521
Expiry date:
31/10/2027
Approval Holder:
Changtai Sinrun Rubber-Plastic Co., Ltd.
Company Name
Changtai Sinrun Rubber-Plastic Co., Ltd.
Address
Xingtai Development Zones, Changtai county, Zhangzhou, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#2210539

'RE7012(70SH)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210539
Expiry date:
31/10/2027
Approval Holder:
Changtai Sinrun Rubber-Plastic Co., Ltd.
Company Name
Changtai Sinrun Rubber-Plastic Co., Ltd.
Address
Xingtai Development Zones, Changtai county, Zhangzhou, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#2211521

'EW Gasket Material'. Black coloured EPDM gasket material which is injection moulded and then spliced. Shore hardness 65A. Initial tested in-radius size 3.9mm. In March 2023, the tested in-radius size was increased to 4.4mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211521
Expiry date:
30/11/2027
Approval Holder:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

Print This Approval

#2210553

'E65-04BL-G / Black'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 0.95mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210553
Expiry date:
31/10/2027
Approval Holder:
Harkesh Rubber LLP
Company Name
Harkesh Rubber LLP
Address
233A Adarash Industrial Estate, Sahar Road, Chakala, Andheri East, Mumbai 400099
Country
India

View All Listings by this Company

Print This Approval

#2211526

'EPDM 1570'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211526
Expiry date:
30/11/2027
Approval Holder:
Shandong Lede Machinery Co. Ltd.
Company Name
Shandong Lede Machinery Co. Ltd.
Address
No 3998 West Waihuan Road, Weicheng District Weifang, Shangdong
Country
China

View All Listings by this Company

Print This Approval

#2211528

'MRP-EN-50, MRP-EN-55, MRP-EN-60, MRP-EN-65, MRP-EN-70, MRP-EN-75 & MRP-EN-80'. Black coloured, compression moulded EPDM materials with a shore hardness of between 50 & 80. Tested in-radius size 0.88mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211528
Expiry date:
30/11/2027
Approval Holder:
Mahalaxmi Rubber Products
Company Name
Mahalaxmi Rubber Products
Address
Plot No 58, Phase 1, IDA Cherlapally, Hyderabad, 500051
Country
India

View All Listings by this Company

Print This Approval

#2211533

'CE EPDM (TY-02-50) & CE EPDM (TY-05-80)'. Black coloured, compression moulded EPDM sheet materials. Shore hardness between 50 & 80. Tested in-radius size between 0.75mm & 1.0mm. For use with water up to 23°C. From February 2024 the materials are for use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211533
Expiry date:
30/11/2027
Approval Holder:
Chandranchal Efforts PVT. LTD.
Company Name
Chandranchal Efforts PVT. LTD.
Address
SY.NO 75/U 76/A Village Chegunta, Dist. Medak Hydrabad -502 255 Telengna
Country
India

View All Listings by this Company

Print This Approval

#2302510

‘EP70A9OF’. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.06mm For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302510
Expiry date:
29/02/2028
Approval Holder:
Fannteer Corporation
Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

Print This Approval

#2211546

'AA6KWZ, AA7KWZ, AA8KWZ and AA9KWZ'. Black coloured, compression moulded EPDM materials with a shore hardness of between 60 & 88. Tested in-radius size 1.0mm. AA6KWZ is for use with water up to 65°C. AA7KWZ, AA8KWZ and AA9KWZ are for use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211546
Expiry date:
30/11/2027
Approval Holder:
Gummiwerk Kraiburg GmbH & Co
Company Name
Gummiwerk Kraiburg GmbH & Co
Address
Teplitzer Strasse 20, D-84478 Waldkraiburg
Country
Germany
Phone
+49 8638 610 Fax: +49 8638 61310

View All Listings by this Company

Print This Approval

#2303506

'HW-EPDM'. Black coloured, compression moulded EPDM sheet materials. Shore hardness 50, 60, 70 and 80. Tested in-radius size 1.0mm. The 50 shore hardness material is for use with water up to 65°C. The 60, 70 & 80 shore hardness materials are for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303506
Expiry date:
31/03/2028
Approval Holder:
Holdwell Components Private Ltd.
Company Name
Holdwell Components Private Ltd.
Address
Plot No. 64-A, Sector-C, Urla Industrial Area, Raipur, Chhattisgarh
Postcode
492003
Country
India

View All Listings by this Company

Print This Approval

#2212558

‘51M5577, 51M6077, 51M6577, 51M7077, 51M7577, 51M8077, 51M8577’. Black coloured, injection moulded EPDM materials. Shore hardness between 55A & 85A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2212558
Expiry date:
31/12/2027
Approval Holder:
WOCO Industrietechnik GmbH
Company Name
WOCO Industrietechnik GmbH
Address
Hanauer Landstrabe 16, D 63628 Bad Soden - Salmunster
Country
Germany

View All Listings by this Company

Print This Approval

#2211560

'APE 55 N'. Black coloured, injection moulded EPDM rubber material. Shore hardness 55. Tested in-radius 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211560
Expiry date:
30/11/2027
Approval Holder:
Intermarp (Italia) Spa
Company Name
Intermarp (Italia) Spa
Address
Via Matteotti 42/46, 1-28060 Granozzo (Novara)
Country
Italy
Phone
+39 0321 555811 Fax: +39 0321 555800

View All Listings by this Company

Print This Approval

#2212559

‘TWK7534, TWK5810, TWK5811, TWK5812, TWK5813, TWK5814, TWK5815’. Black coloured, injection moulded EPDM materials. Shore hardness between 55A & 85A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2212559
Expiry date:
31/12/2027
Approval Holder:
Polymer-Technik Elbe GmbH
Company Name
Polymer-Technik Elbe GmbH
Address
Heuweg 5, 06886 Lutherstadt Wittenberg
Country
Germany
Phone
+49-3491-659-155

View All Listings by this Company

Print This Approval

#2301523

'GM-EP01'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.15mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2301523
Expiry date:
31/01/2028
Approval Holder:
Shandong Guoming Water Transfer Rubber Products Co., Ltd.
Company Name
Shandong Guoming Water Transfer Rubber Products Co., Ltd.
Address
Courtyard of Shandong Guoming Ductile Casting Pipe Technology Co., Ltd. Baishui Niu Village, Shangyan Town, Lanling County Linyu, City
Country
China

View All Listings by this Company

Print This Approval

#2301527

'EPDM E282'. Black coloured, compression moulded EPDM sheet material. Shore hardness 80A. Tested in-radius size 1.0 For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2301527
Expiry date:
31/01/2028
Approval Holder:
TRP Sealing Systems Ltd.
Company Name
TRP Sealing Systems Ltd.
Address
24 Netherwood Road, Rotherwas Industrial Estate, Hereford
Postcode
HR2 6JU

View All Listings by this Company

Print This Approval

#2303507

'E7014F'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C. From April 2023, the material is for use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303507
Expiry date:
31/03/2028
Approval Holder:
Xiamen Maihua Rubber Products Co. Ltd.
Company Name
Xiamen Maihua Rubber Products Co. Ltd.
Address
No.36, Dapu Road, Fengnan, Tong’an District, Xiamen 361100
Country
China
Phone
+86-592-7766536
General Email
info@xmmh.com

View All Listings by this Company

Print This Approval

#2205573

'EPDM 70.503-00'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2205573
Expiry date:
31/05/2027
Approval Holder:
Angst+Pfister AG
Company Name
Angst+Pfister AG
Address
Thurgauerstrass 66, CH8052 Zurich
Country
Switzerland
Phone
+41 44 306 61 11
General Email
ch@angst-pfister.com

View All Listings by this Company

Print This Approval

#2302547

'51616 – E40, 51616 – E50, 51616 – E60, 51616 – E70 & 51616 – E80'. Black coloured, compression moulded EPDM materials. Shore hardness between 40 & 80. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302547
Expiry date:
29/02/2028
Approval Holder:
Arul Polymers Pvt Ltd.
Company Name
Arul Polymers Pvt Ltd.
Address
A-6C, SIDCO industrial Estate, Hosur-635126. Krishnagiri ( District). TamilNadu.
Country
India
General Email
development@arulrubbers.com

View All Listings by this Company

Print This Approval

#2210559

'5594610'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210559
Expiry date:
31/10/2027
Approval Holder:
Eriks
Company Name
Eriks
Address
5330 Emmer Drive, New Berlin, WI 53151
Country
United States

View All Listings by this Company

Print This Approval

#2303545

‘Sunaflex T 9635’. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. Between March 2023 and August 2023, the material was for use with water up to 23°C. Between September 2023 and March 2028, the material is for use with water up to 80°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303545
Expiry date:
31/03/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2304525

'A-KT 80-00'. Black coloured, extruded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2304525
Expiry date:
30/04/2028
Approval Holder:
Holcim Technical Solutions and Products GmbH
Company Name
Holcim Technical Solutions and Products GmbH
Address
Fred-Joachim-Schoeps-Str. 55, 68535 Edingen-Neckarhausen, Germany

View All Listings by this Company

Print This Approval

#2304526

'A-KT 90-00'. Black coloured, extruded and rotocured EPDM rubber material. Shore hardness 90. Tested in-radius size 1.0mm. Between April 2023 and October 2024, the material is for use with water up to 23°C. From November 2024, the material is for use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2304526
Expiry date:
30/04/2028
Approval Holder:
Holcim Technical Solutions and Products GmbH
Company Name
Holcim Technical Solutions and Products GmbH
Address
Fred-Joachim-Schoeps-Str. 55, 68535 Edingen-Neckarhausen, Germany

View All Listings by this Company

Print This Approval

#2303547

'EPNER-4665'. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303547
Expiry date:
31/03/2028
Approval Holder:
National Engineering Industries Ltd.
Company Name
National Engineering Industries Ltd.
Address
2 Beerpara Lane, Dum Dum, Kolkata 700030
Country
India

View All Listings by this Company

Print This Approval

#2304539

‘CRIEP50 & CRIEP80’. Black coloured, compression moulded EPDM rubber materials. Shore hardness 50 & 80 respectively. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2304539
Expiry date:
30/04/2028
Approval Holder:
Maithri Rubber Industries
Company Name
Maithri Rubber Industries
Address
3-4-28/1, Chavan Plaza, Sudhanagar, Hanamkonda, Warangal, TL 506001
Country
India

View All Listings by this Company

Print This Approval

#2304542

'EIW-54'. Black coloured, injection moulded EPDM material. Shore hardness 51 ShA. Tested in-radius size 0.5mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2304542
Expiry date:
30/04/2028
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2211564

'Liner Code 'W' (for Butterfly Valves R480/R481/R487 & R488)'. Black coloured, compression moulded EPDM material with a shore hardness of 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211564
Expiry date:
30/11/2027
Approval Holder:
GEMÜ Gebr. Müller Apparatebau GmbH
Company Name
GEMÜ Gebr. Müller Apparatebau GmbH
Address
Fritz-Müller-Platz 1, 74676 Niedernhall-Waldzimmern
Country
Germany

View All Listings by this Company

Print This Approval

#2305527

'Sunaflex T 8165'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2305527
Expiry date:
31/05/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2211566

'E134-B85-KTW-W270'. Black coloured, compression moulded EPDM material with a shore hardness of 88. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211566
Expiry date:
30/11/2027
Approval Holder:
Seal Maker Produktions- und Vertriebs GmbH
Company Name
Seal Maker Produktions- und Vertriebs GmbH
Address
Viktor-Kaplan Allee 7, A – 7025 Pöttelsdorf
Country
Austria

View All Listings by this Company

Print This Approval

#2310501

'HG02'. Black coloured, compression moulded EPDM sheet material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2310501
Expiry date:
31/10/2028
Approval Holder:
Qingdao Huaguan Valve Co., Ltd.
Company Name
Qingdao Huaguan Valve Co., Ltd.
Address
Wanjia Town, Pingdu, Qingao City, Shandong Province
Country
China

View All Listings by this Company

Print This Approval

#2210560

'SE-618PF'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210560
Expiry date:
31/10/2027
Approval Holder:
Hun-Yi Rubber Industrial Co., Ltd.
Company Name
Hun-Yi Rubber Industrial Co., Ltd.
Address
No. 40, Lane 193, Hochen Road, Homei Town, Changhua County
Country
Taiwan,
Phone
+(886)47551315
General Email
hunyirubber@yahoo.com.tw

View All Listings by this Company

Print This Approval

#2302564

Initial approval was for ‘REK-8000-Premium’ (shore hardness 80) only. In April 2024 ‘REK-5000-Premium’ (shore hardness 50) & ‘REK-7000-Premium’ (shore hardness 70) were added to the approval. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302564
Expiry date:
29/02/2028
Approval Holder:
Rekor Kaucuk Sanayi ve Ticaret A.S.
Company Name
Rekor Kaucuk Sanayi ve Ticaret A.S.
Address
REKOR KAUÇUK, OSB 21. Cadde No: 20 Odunpazarı, Eskişehir
Country
Turkey

View All Listings by this Company

Print This Approval

#2012574

'E7015WRC'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012574
Expiry date:
31/12/2025
Approval Holder:
Satori Seal Corporation
Company Name
Satori Seal Corporation
Address
8455 Utica Avenue, Rancho Cucamonga, CA 91730-3809
Country
USA

View All Listings by this Company

Print This Approval

#2306530

'EPDM H 85'. Black coloured, compression moulded EPDM rubber material. Shore hardness 85. Tested in-radius size 1.10mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306530
Expiry date:
30/06/2028
Approval Holder:
Prabhat Elastomers Pvt. Ltd.
Company Name
Prabhat Elastomers Pvt. Ltd.
Address
'Prabhat Bhavan', 96 L.B.S. Marg, Vikhroli West, Mumbai, Maharashtra 400083
Country
India
Phone
+91 22 3294 6102
General Email
prabhatin@vsnl.com

View All Listings by this Company

Print This Approval

#2306533

'Mescola EPDM-PX 659/70.nr'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306533
Expiry date:
30/06/2028
Approval Holder:
Argo Di Tm Fumagalli S.r.l.
Company Name
Argo Di Tm Fumagalli S.r.l.
Address
Via Monte Pordoi 5, 20021 Baranzare (MI)
Country
Italy

View All Listings by this Company

Print This Approval

#2312502

'EP5360'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in -radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312502
Expiry date:
31/12/2028
Approval Holder:
WEFLO Valve Co., Ltd.
Company Name
WEFLO Valve Co., Ltd.
Address
No 789 Chunyang Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong
Country
China

View All Listings by this Company

Print This Approval

#2307513

‘E7035PF EPDM’. Black coloured, compression moulded EPDM material. Shore hardness 70A. Tested in-radius 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307513
Expiry date:
31/07/2028
Approval Holder:
MFC Sealing Technology Co., Ltd./ MFC Sealing Technology(Huizhou) Co., Ltd.
Company Name
MFC Sealing Technology Co., Ltd./ MFC Sealing Technology(Huizhou) Co., Ltd.
Address
No 41 Wu-Chuan-Wu Road, New Taipei Industrial Park, New Taipei City
Country
Taiwan

View All Listings by this Company

Print This Approval

#2307515

'CS-EW70'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 0.96mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307515
Expiry date:
31/07/2028
Approval Holder:
Cherrysource Ltd.
Company Name
Cherrysource Ltd.
Address
Unit 7, Pinfold Lane, Llay Industrial Estate, Llay, Wrexham
Postcode
LL12 0PX

View All Listings by this Company

Print This Approval

#2306559

'ML 57314'. Black coloured, compression moulded EPDM material. Shore hardness 68A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306559
Expiry date:
30/06/2028
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#2307527

'EPDM-812-cm (70H/mid)'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307527
Expiry date:
31/07/2028
Approval Holder:
Ein Shemer Rubber Industries A.C.A. Ltd
Company Name
Ein Shemer Rubber Industries A.C.A. Ltd
Address
D.N. Hefer 38816 Kibbutz Ein-Shemer
Country
Israel

View All Listings by this Company

Print This Approval

#2306561

'PT-EPDM55'. Black coloured, compression moulded EPDM material. Shore hardness 55. Tested in-radius size 1.1mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306561
Expiry date:
30/06/2028
Approval Holder:
Shanghai Pingtai Rubber Products Co. Ltd.
Company Name
Shanghai Pingtai Rubber Products Co. Ltd.
Address
No. 6 Siping Road, Situan Town, Fengxian District, Shanghai

View All Listings by this Company

Print This Approval

#2307529

'AEC.5/EPDM.80'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307529
Expiry date:
31/07/2028
Approval Holder:
Allianz Elastomer
Company Name
Allianz Elastomer
Address
Opp.-Samarpan Lamination, Rajpar Road AT-Sakatsanla, Morbi 363641 Gujarat
Country
India

View All Listings by this Company

Print This Approval

#2308514

'EPDM 773'. Black coloured, injection moulded EPDM sheet material (manufactured in Czech Republic). Shore hardness 50. Tested in radius sizes 0.9mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308514
Expiry date:
31/08/2028
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2308515

'EPDM 798'. Black coloured, injection moulded EPDM material (manufactured in Czech Republic). Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308515
Expiry date:
31/08/2028
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2308523

'Kingsun EP1702'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308523
Expiry date:
31/08/2028
Approval Holder:
Kingsun Sealing Technology (Shanghai) Co., Ltd
Company Name
Kingsun Sealing Technology (Shanghai) Co., Ltd
Address
Room402, Building 7, No.5, Lane 689, Xiwang Road, Jiading District, Shanghai
Country
China

View All Listings by this Company

Print This Approval

#2312503

'XXE01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312503
Expiry date:
31/12/2028
Approval Holder:
Xingtai Rubber Factory
Company Name
Xingtai Rubber Factory
Address
No. 175 North Xingzhou Road, Xingtai City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval

#2309510

'JM-EP01'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309510
Expiry date:
30/09/2028
Approval Holder:
Wuhu Jinmao Environmental Science & Technology Co. Ltd.
Company Name
Wuhu Jinmao Environmental Science & Technology Co. Ltd.
Address
The Industrial Zone in Suncun Town, Fanchang County, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#2308528

'Sunaflex T 8193'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308528
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2308529

'AquaFlex T 5893'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308529
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2308530

'AquaFlex T 9696'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308530
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2409500

'EUW-70'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2409500
Expiry date:
30/09/2029
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2302565

‘SMS-8000-Premium’. Black coloured, compression moulded EPDM material. Shore hardness 80 respectively. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302565
Expiry date:
29/02/2028
Approval Holder:
Samsun Makina Sanayi A.S.
Company Name
Samsun Makina Sanayi A.S.
Address
Organize Sanayi Bolgesi, Yasar Dogu Caddesi, No. 33 P.K. 136
Country
55267 Kutlukent,

View All Listings by this Company

Print This Approval

#2309514

'NPEPDM-80'. Shore hardness 80. 'NPEPDM-50' was added to the approval in December 2023. Shore hardness 50. Black coloured, compression moulded, EPDM materials. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309514
Expiry date:
30/09/2028
Approval Holder:
National Polymers
Company Name
National Polymers
Address
Survey No.-2B6, Plot No .3 Vill -Rupal, Taluka- Bavla, Ahmedabad-380009, Gujarat
Country
India

View All Listings by this Company

Print This Approval

#2309521

'334701 - EPDM peroxide 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309521
Expiry date:
30/09/2028
Approval Holder:
Techne SA
Company Name
Techne SA
Address
ZA Les Haies, 69480 Morance
Country
France
Phone
+33 478 430156
General Email
www.techne.fr

View All Listings by this Company

Print This Approval

#2309526

'Ganga 50, 60, 70, 80 & 90'. Black coloured, compression moulded EPDM materials with a shore hardness of between 50 & 90 ShA. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309526
Expiry date:
30/09/2028
Approval Holder:
Mangla Rubber Technologies
Company Name
Mangla Rubber Technologies
Address
319 Shivaji Road, Vijay Nagar, Meerut, UP 250002
Country
India

View All Listings by this Company

Print This Approval

#2310508

'EPDM50BKWS, EPDM55BKWS, EPDM60BKWS, EPDM65BKWS, EPDM70BKWS, EPDM75BKWS & EPDM80BKWS'. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2310508
Expiry date:
31/10/2028
Approval Holder:
Kesaria Rubber Industries Pvt. Ltd.
Company Name
Kesaria Rubber Industries Pvt. Ltd.
Address
Binola Industrial Area, VPO Bhoda Kalan, 57/58 KM Stone, NH-8, Gurgaon, 122413, Haryana
Country
India

View All Listings by this Company

Print This Approval

#2204543

'JJSXEPDMIRHD50 (shore hardness 50) & JJSXEPDMIRHD70 (shore hardness 70)'. Black coloured, compression moulded EPDM materials. Tested in-radius size 0.99mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204543
Expiry date:
30/04/2027
Approval Holder:
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Company Name
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Address
Building No.5, Zi Yun Wisdom Plaza, No. 19 Kazimen Avenue, Qinhuai District, Nanjing
Country
China

View All Listings by this Company

Print This Approval

#2310526

Sunaflex® T 8715. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.00mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2310526
Expiry date:
31/10/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2303557

'E7014F'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C. From April 2023, the material is for use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303557
Expiry date:
31/03/2028
Approval Holder:
Maihua (Xiamen) newmaterial Co., Ltd.
Company Name
Maihua (Xiamen) newmaterial Co., Ltd.
Address
2F,factory building 3, No.36,Dapu Road, Fengnan, Tongan District, Xiamen City
Country
China

View All Listings by this Company

Print This Approval

#2310547

'EPDM 30114010102A Black'. Black coloured, compression moulded EPDM sheet material. Shore hardness 75. Tested in-radius size 3.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2310547
Expiry date:
31/10/2028
Approval Holder:
Unitech Rubber Seal Solutions (Tianjin) Co Ltd
Company Name
Unitech Rubber Seal Solutions (Tianjin) Co Ltd
Address
Jingbin Industry Park, Wuqing District, Tianjin
Country
China
Phone
+86-13821320325; +86-22-85190998
General Email
service@unitech.cc

View All Listings by this Company

Print This Approval

#2309538

'PT0165/2'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius 1.25mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309538
Expiry date:
30/09/2028
Approval Holder:
TS International S.r.l.
Company Name
TS International S.r.l.
Address
Via G. Carducci 19, 24060 Sovere (BG)
Country
Italy

View All Listings by this Company

Print This Approval

#2311517

'HBHG'. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311517
Expiry date:
30/11/2028
Approval Holder:
Hebei Huagen Technology Co., Ltd.
Company Name
Hebei Huagen Technology Co., Ltd.
Address
568 Zhonghu Avenue, Taocheng District, Hengshui City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval

#2308551

'AquaFlex T 5857'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308551
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2311548

'334137 – EPDM Peroxide 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311548
Expiry date:
30/11/2028
Approval Holder:
Techne
Company Name
Techne
Address
ZA Les Haies, 69480 MORANCE
Country
France

View All Listings by this Company

Print This Approval

#2311549

'PT0469'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311549
Expiry date:
30/11/2028
Approval Holder:
TS International S.r.l.
Company Name
TS International S.r.l.
Address
Via G. Carducci 19, 24060 Sovere (BG)
Country
Italy

View All Listings by this Company

Print This Approval

#2403502

'EP002971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2403502
Expiry date:
31/03/2029
Approval Holder:
Chang Xing Rubber (Shanghai) LLC.
Company Name
Chang Xing Rubber (Shanghai) LLC.
Address
No. 88, Zhong-Chen Rd. Songjiang Zone, Shanghai City
Country
China

View All Listings by this Company

Print This Approval

#2403503

'EP7001165PWRC'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2403503
Expiry date:
31/03/2029
Approval Holder:
Chang Xing Rubber (Shanghai) LLC.
Company Name
Chang Xing Rubber (Shanghai) LLC.
Address
No. 88, Zhong-Chen Rd. Songjiang Zone, Shanghai City
Country
China

View All Listings by this Company

Print This Approval

#2405504

'EPDM HT5697-4A'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. Between May 2024 and October 2024, the material was for use with water up to 50°C. Between November 2024 and May 2029, the material is for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2405504
Expiry date:
31/05/2029
Approval Holder:
Terramix SA/Hultec
Company Name
Terramix SA/Hultec
Address
De Empaques Santa Ana 150 M Este Y 125 M Sur Pozos De Santa Ana
Country
San Jose, Costa Rica
Phone
Tel: +506 2829900 Fax: +506 2822514

View All Listings by this Company

Print This Approval

#2311556

'ML 57302'. Black coloured, compression moulded EPDM material. Shore hardness 55A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311556
Expiry date:
30/11/2028
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#240755001

'EP02971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755001
Expiry date:
31/07/2029
Approval Holder:
Chang Horing Rubber Co., Ltd.
Company Name
Chang Horing Rubber Co., Ltd.
Address
No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien
Country
Taiwan
Phone
+886 4 7810868

View All Listings by this Company

Print This Approval

#2312536

'SME001 EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 60. In November 2024 'SME001 EPDM', a compression moulded EPDM rubber with a shore hardness of 75 was added to the approval so that a range with a hardness between 60 & 75 is covered by the approval. Tested in-radius size of 1.0mm and are for use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312536
Expiry date:
31/12/2028
Approval Holder:
SRI RAMKARTHIC POLYMERS PVT LTD
Company Name
SRI RAMKARTHIC POLYMERS PVT LTD
Address
D.NO 2/1 - 1&2 SF NO 237/1B&2A Thudiyalur Road, Kottaipalayam, Coimbatore, TA 641110
Country
India

View All Listings by this Company

Print This Approval

#240550005

'E59WKZ'. Black coloured, injection moulded EPDM rubber material. Shore hardness 58. Tested in-radius 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240550005
Expiry date:
31/05/2029
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval

#240155010

'HT5557-10'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 1.0mm. Between January 2024 and March 2024, the material was for use with water up to 50°C. From April 2024 the material is for use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240155010
Expiry date:
31/01/2029
Approval Holder:
Terramix SA/Hultec
Company Name
Terramix SA/Hultec
Address
De Empaques Santa Ana 150 M Este Y 125 M Sur Pozos De Santa Ana
Country
San Jose, Costa Rica
Phone
Tel: +506 2829900 Fax: +506 2822514

View All Listings by this Company

Print This Approval

#2106561

'EP210107'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106561
Expiry date:
30/06/2026
Approval Holder:
Klamflex Pipe Couplings (Pty) Limited
Company Name
Klamflex Pipe Couplings (Pty) Limited

View All Listings by this Company

Print This Approval

#240255027

'EPDM-A-001'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255027
Expiry date:
28/02/2029
Approval Holder:
Dalian Rainbow Foundry Co., Ltd.
Company Name
Dalian Rainbow Foundry Co., Ltd.
Address
Hebin North Road #51, Deng Sha He Town, JinZhou District, Dalian
Country
China

View All Listings by this Company

Print This Approval

#240255040

'3E60B11P/3E60B18P & 3E70B03P/3E70B16P'. Black coloured, compression moulded EPDM materials. Shore hardness 60 & 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255040
Expiry date:
28/02/2029
Approval Holder:
Tosin Industrial Corporation
Company Name
Tosin Industrial Corporation
Address
No 116-2 & 117, Lane 460, Nan Shin 2nd See., Chung Feng Road, Pingzhen Bist, Taoyuan City 32472
Country
Taiwan

View All Listings by this Company

Print This Approval

#240355009

'EW gasket material'. Black coloured, injection moulded, EPDM gasket material. Shore hardness 65A. Tested in-radius size 3.9mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240355009
Expiry date:
31/03/2029
Approval Holder:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

Print This Approval

#241255001

'E6029 (shore hardness 70) & E6392 (shore hardness 80)'. Black coloured, compression moulded EPDM rubber materials. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255001
Expiry date:
31/12/2029
Approval Holder:
DLR Elastomer Engineering Ltd.
Company Name
DLR Elastomer Engineering Ltd.
Address
Unit 1A & B, Leyland Business Park, Centurion Way, Farington, Leyland
Postcode
PR25 3GR

View All Listings by this Company

Print This Approval

#2311570

'EPDM-LJHY'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311570
Expiry date:
30/11/2028
Approval Holder:
Anhui Lujiang Huayi Rubber Products Co. Ltd.
Company Name
Anhui Lujiang Huayi Rubber Products Co. Ltd.
Address
Quanshui Industrial Zone, Baihu Town, Lujiang County, Hefei City, Anhui
Country
China

View All Listings by this Company

Print This Approval

#240355019

'ECW-70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240355019
Expiry date:
31/03/2029
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2311571

'Jihua 3517'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311571
Expiry date:
30/11/2028
Approval Holder:
Jihua Rubber Industrial Co., Ltd.
Company Name
Jihua Rubber Industrial Co., Ltd.
Address
Jihua Polymer Material High-tech Industrial Park, The Yangtze River Road, Yueyang Area, (Hunan) Pilot Free Trade Zone
Country
China

View All Listings by this Company

Print This Approval

#241055001

'EP05280PWRC'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055001
Expiry date:
31/10/2029
Approval Holder:
Chang Horing Rubber Co., Ltd.
Company Name
Chang Horing Rubber Co., Ltd.
Address
No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien
Country
Taiwan
Phone
+886 4 7810868

View All Listings by this Company

Print This Approval

#240755003

'EH700-144'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755003
Expiry date:
31/07/2029
Approval Holder:
Chi-Yih Enterprise Co., Ltd.
Company Name
Chi-Yih Enterprise Co., Ltd.
Address
No 93, Lane 245, Section 3 Sha-Tien Road Ta-Tu 432 Taichung
Country
Taiwan
Phone
+88 6426 996 802
General Email
eric@chiyih.com

View All Listings by this Company

Print This Approval

#240355027

'EUW-75'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240355027
Expiry date:
31/03/2029
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2311572

'EPDM-LJHY'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311572
Expiry date:
30/11/2028
Approval Holder:
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Company Name
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Address
Building No.5, Zi Yun Wisdom Plaza, No. 19 Kazimen Avenue, Qinhuai District, Nanjing
Country
China

View All Listings by this Company

Print This Approval

#240755004

'EP7041F'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755004
Expiry date:
31/07/2029
Approval Holder:
Xiamen HongYangXin Rubber Tech Co., Ltd.
Company Name
Xiamen HongYangXin Rubber Tech Co., Ltd.
Address
866 Xiafang, Jishan Village, Xingtai Development Zone, Changtai District, Zhangzhou City, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#241055002

'EP801324C'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055002
Expiry date:
31/10/2029
Approval Holder:
Fannteer Corporation
Company Name
Fannteer Corporation
Address
2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680
Country
Taiwan
Phone
+886 2 2577 4691
General Email
info@fannteer.com.tw

View All Listings by this Company

Print This Approval

#240255055

'C12251'. Black coloured, compression moulded EPDM material. Shore hardness 77. Tested in-radius size 10.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255055
Expiry date:
28/02/2029
Approval Holder:
KSB SAS
Company Name
KSB SAS
Address
Zone Industriale de Gagnaire Fonseche, 24490 LA ROCHE CHALAIS
Country
France
Phone
(+33) 553 92 44 00

View All Listings by this Company

Print This Approval

#2210563

'CH EP 160 DM'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210563
Expiry date:
31/10/2027
Approval Holder:
DIS MRP Seals (p) Ltd.
Company Name
DIS MRP Seals (p) Ltd.
Address
DP4, Sidco Industrial Estate, Arakkonam, Ranipet Dist, Tamil Nadu, 631 005
Country
India

View All Listings by this Company

Print This Approval

#240755005

'EP02971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755005
Expiry date:
31/07/2029
Approval Holder:
Yaw-Yew Rubber Co. Ltd.
Company Name
Yaw-Yew Rubber Co. Ltd.
Address
No. 49-38, Fanshe St. Fuxing Township, Changhua County
Country
Taiwan
Phone
+886-4-7783390

View All Listings by this Company

Print This Approval

#240355050

'EPDM BW 5950 J 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 2.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240355050
Expiry date:
31/03/2029
Approval Holder:
Prabhat Elastomers Pvt. Ltd.
Company Name
Prabhat Elastomers Pvt. Ltd.
Address
'Prabhat Bhavan', 96 L.B.S. Marg, Vikhroli West, Mumbai, Maharashtra 400083
Country
India
Phone
+91 22 3294 6102
General Email
prabhatin@vsnl.com

View All Listings by this Company

Print This Approval

#240555028

'KX-1'. Black coloured, compression moulded, EPDM rubber sheet material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555028
Expiry date:
31/05/2029
Approval Holder:
Suzhou Kangxi Rubber Plastic Co. Ltd.
Company Name
Suzhou Kangxi Rubber Plastic Co. Ltd.
Address
No. 159 Dongqiao Renmin Road, Huang dai Town, Suzhou City, Jiangsu Province
Country
China

View All Listings by this Company

Print This Approval

#2302568

Initial approval was for ‘SMS-80’ (shore hardness 80) only. In April 2024 ‘SMS-50' (shore hardness 50) & ‘SMS-70’(shore hardness 70) were added to the approval. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302568
Expiry date:
29/02/2028
Approval Holder:
SAMSUN MAKINA SANAYI A.S.
Company Name
SAMSUN MAKINA SANAYI A.S.
Address
ORGANIZE SANAYI BOLGESI, YASAR DOGU CADDESI, N0:41 55300, KUTLUKENT, SAMSUN
Country
Turkey
Phone
+90 362 266 51 60
General Email
info@samsunmakina.com.tr

View All Listings by this Company

Print This Approval

#240455051

'AquaFlex T 5858'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240455051
Expiry date:
30/04/2029
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#240555033

'EPDM70-BH'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555033
Expiry date:
31/05/2029
Approval Holder:
Anhui Binghui Technology Co., Ltd.
Company Name
Anhui Binghui Technology Co., Ltd.
Address
No. 3399, Qifeng Road, Shizishan High-tech Industrial Development Zone, Tongguan District, Tongling City, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#240555034

'DQ-EPDM75'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555034
Expiry date:
31/05/2029
Approval Holder:
Ningbo Daqi Sealing Technology Co., Ltd.
Company Name
Ningbo Daqi Sealing Technology Co., Ltd.
Address
No. 398 Yiheng Road, Industrial Zone, Changhe Town, Cixi City, Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval

#240555037

'HT5557-20'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555037
Expiry date:
31/05/2029
Approval Holder:
Terramix S.A. / Hultec
Company Name
Terramix S.A. / Hultec
Address
PO BOX 84140-1000, San José
Country
Costa Rica

View All Listings by this Company

Print This Approval

#240555043

'EP8008'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555043
Expiry date:
31/05/2029
Approval Holder:
Xiamen Haiyixin Rubber Seal Products Co., Ltd.
Company Name
Xiamen Haiyixin Rubber Seal Products Co., Ltd.
Address
Haicang Distr., Xiamen, Fujian, CN-361027
Country
China

View All Listings by this Company

Print This Approval

#240555046

'LX-EP701P'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555046
Expiry date:
31/05/2029
Approval Holder:
Anhui Lixin Rubber Technology Co., Ltd.
Company Name
Anhui Lixin Rubber Technology Co., Ltd.
Address
6 Xinqing Road, Industrial Zone, Xuanzhou District, Xuancheng City, Anhui Provice, 242000
Country
China

View All Listings by this Company

Print This Approval

#240755010

'EZ Valve EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755010
Expiry date:
31/07/2029
Approval Holder:
Henkel Corporation
Company Name
Henkel Corporation
Address
One Henkel Way, Rocky Hill, 06067
Country
United States

View All Listings by this Company

Print This Approval

#240655006

'AEC 2/EPDM-50, AEC 3/EPDM-60, AEC 4/EPDM-70 & AEC.A5/EPDM-80'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655006
Expiry date:
30/06/2029
Approval Holder:
Allianz Elastomer
Company Name
Allianz Elastomer
Address
Opp.-Samarpan Lamination, Rajpar Road AT-Sakatsanla, Morbi 363641 Gujarat
Country
India

View All Listings by this Company

Print This Approval

#240755011

'SE-718PF'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755011
Expiry date:
31/07/2029
Approval Holder:
Hun-Yi Rubber Industrial Co., Ltd.
Company Name
Hun-Yi Rubber Industrial Co., Ltd.
Address
No. 40, Lane 193, Hochen Road, Homei Town, Changhua County, Taiwan
Country
China

View All Listings by this Company

Print This Approval

#240655015

'AquaFlex T 5821'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655015
Expiry date:
30/06/2029
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#240555055

'EDXX 74'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240555055
Expiry date:
31/05/2029
Approval Holder:
Sattec DBS Gomma S.r.l
Company Name
Sattec DBS Gomma S.r.l
Address
Via E. Mattei, 12, 33080 Prata di Pordenone - PN
Country
Italy
Phone
+39-0434 620100
General Email
commerciale@sattecgomma.it

View All Listings by this Company

Print This Approval

#240755014

'70EP505P'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755014
Expiry date:
31/07/2029
Approval Holder:
Xiamen Baode Tech Rubber Co. Ltd.
Company Name
Xiamen Baode Tech Rubber Co. Ltd.
Address
5th Floor, No. 40, Huli Park, Tong'an Industrial Concentration Zone, Xiamen City, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#2212574

‘EPDM EV2’. Black coloured, injection moulded EPDM materials. Shore hardness 75A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2212574
Expiry date:
31/12/2027
Approval Holder:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

Print This Approval

#240455062

‘ML57308’ Black coloured, compression moulded EPDM rubber material. Shore hardness 75A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240455062
Expiry date:
30/04/2029
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#240655052

'OLDAL 460'. Black coloured, injection moulded EPDM material. Shore hardness 50. Tested in-radius size 1.2mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655052
Expiry date:
30/06/2029
Approval Holder:
Oldrati Guarnizioni Industriali Spa
Company Name
Oldrati Guarnizioni Industriali Spa
Address
Via Quarenghi 2, 24060 Villongo (Bergamo)
Country
Italy
Phone
+39 035 939213 Fax: +39 035 939613

View All Listings by this Company

Print This Approval

#240755015

'E7083AA'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755015
Expiry date:
31/07/2029
Approval Holder:
Ge Mao Rubber Industrial Co. Ltd.
Company Name
Ge Mao Rubber Industrial Co. Ltd.
Address
No15, Kung-Yeh East 4th Road, Lu-Kang, Chang Hua, Taiwan
Country
China
Phone
+886 4781 0288 Fax: +886 4781 0289

View All Listings by this Company

Print This Approval

#241055005

'E8083AA'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055005
Expiry date:
31/10/2029
Approval Holder:
Ge Mao Rubber Industrial Co. Ltd.
Company Name
Ge Mao Rubber Industrial Co. Ltd.
Address
No15, Kung-Yeh East 4th Road, Lu-Kang, Chang Hua, Taiwan
Country
China
Phone
+886 4781 0288 Fax: +886 4781 0289

View All Listings by this Company

Print This Approval

#240755016

'CH EP 172 DM'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755016
Expiry date:
31/07/2029
Approval Holder:
DIS MRP Seals (p) Ltd.
Company Name
DIS MRP Seals (p) Ltd.
Address
DP4, Sidco Industrial Estate, Arakkonam, Ranipet Dist, Tamil Nadu, 631 005
Country
India

View All Listings by this Company

Print This Approval

#241055006

'SE-808PF'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055006
Expiry date:
31/10/2029
Approval Holder:
Hun-Yi Rubber Industrial Co., Ltd.
Company Name
Hun-Yi Rubber Industrial Co., Ltd.
Address
No. 40, Lane 193, Hochen Road, Homei Town, Changhua County, Taiwan
Country
China

View All Listings by this Company

Print This Approval

#240755028

'EP7037K'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755028
Expiry date:
31/07/2029
Approval Holder:
Progum Elastomer Technology Co., Ltd.
Company Name
Progum Elastomer Technology Co., Ltd.
Address
5F-9, No 258 Liancheng Road, Jhonghe District, New Taipei City 23553
Country
Taiwan

View All Listings by this Company

Print This Approval

#240655064

'Pango2023'. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655064
Expiry date:
30/06/2029
Approval Holder:
Pango Pump and Valve Manufacturing (Shandong) Co. Ltd.
Company Name
Pango Pump and Valve Manufacturing (Shandong) Co. Ltd.
Address
Workshop No.7 West Zone, Pump and Valve Technology Industrial Park, Beixinzhuang Village, Xinxing Town, Lanling County, Linyi City
Country
China

View All Listings by this Company

Print This Approval

#2007547

'EW-001'. Black coloured, compression moulded EPDM material. Shore hardness 65. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2007547
Expiry date:
31/07/2025
Approval Holder:
Gif Plastik Sanayi Ticaret Ltd. Sti
Company Name
Gif Plastik Sanayi Ticaret Ltd. Sti
Address
Kayapa OSB Mah. Nergiz (530) Cad. No. 7, Nilufer, Bursa 16315
Country
Turkey

View All Listings by this Company

Print This Approval

#240655067

'TRA-7073'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240655067
Expiry date:
30/06/2029
Approval Holder:
Talbros Sealing Material Pvt. Ltd.
Company Name
Talbros Sealing Material Pvt. Ltd.
Address
Plot No. 60, Sec-6, Faridabad Haryana, Pin Code 121006
Country
India

View All Listings by this Company

Print This Approval

#240855017

'EPDM70(E7-512K)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240855017
Expiry date:
31/08/2029
Approval Holder:
Air Water Mach Rubber Products (Fujian) CO., LTD.
Company Name
Air Water Mach Rubber Products (Fujian) CO., LTD.
Address
Rongqiao Economy and Technology Development Zone, Fuqing City, Fujian Province
Country
China

View All Listings by this Company

Print This Approval

#240855034

'LCKB70'. Black coloured, compression moulded EPDM material. Shore hardness 70A. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240855034
Expiry date:
31/08/2029
Approval Holder:
Comet Srl
Company Name
Comet Srl
Address
Via Fogliano, Trav I, 12, 25030 Coccaglio (BS)
Country
Italy
Phone
+39 035 933535
General Email
comet@cometsre.com

View All Listings by this Company

Print This Approval

#240955014

'E13970'. Black coloured, injection moulded EPDM material. Shore hardness 65. Tested in-radius size 1.3mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240955014
Expiry date:
30/09/2029
Approval Holder:
Berwin Polymer Processing Group
Company Name
Berwin Polymer Processing Group
Address
Broadway, Globe Lane Industrial Estate, Dukinfield, Cheshire
Postcode
SK16 4UJ

View All Listings by this Company

Print This Approval

#240955049

'F3352'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 0.65mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240955049
Expiry date:
30/09/2029
Approval Holder:
Qingyang Ruibo Rubber Seal Products Factory
Company Name
Qingyang Ruibo Rubber Seal Products Factory
Address
No. 1 Economic Development Qingyang, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#241055049

'ERA10-2 SEALING'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055049
Expiry date:
31/10/2029
Approval Holder:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#241055059

'EP80R-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.5mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055059
Expiry date:
31/10/2029
Approval Holder:
Jinan Lide Rubber & Plastic Co. Ltd.
Company Name
Jinan Lide Rubber & Plastic Co. Ltd.
Address
Pingyin Industrial Park, Yushan Zone, Jinan
Country
China

View All Listings by this Company

Print This Approval

#240955062

'EPWL-60'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size between 1.25mm & 5.25mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240955062
Expiry date:
30/09/2029
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval

#250155008

'ME0940/40 - 90'. Black coloured, injection moulded EPDM rubber material. Shore hardness between 40 & 90. Tested in-radii sizes between 1.0mm & 3.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250155008
Expiry date:
31/01/2030
Approval Holder:
Elastotech s.r.l.
Company Name
Elastotech s.r.l.
Address
Via Provinciale, 92/94, 24060 Castelli Calepio (BG)
Country
Italy
Phone
0039 - 035 - 4496000

View All Listings by this Company

Print This Approval

#250455005

'OLD ETP890 70N'. Black coloured, injection moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.11mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250455005
Expiry date:
30/04/2030
Approval Holder:
Oldrati Guarnizioni Industriali Spa
Company Name
Oldrati Guarnizioni Industriali Spa
Address
Via Quarenghi 2, 24060 Villongo (Bergamo)
Country
Italy
Phone
+39 035 939213 Fax: +39 035 939613

View All Listings by this Company

Print This Approval

#240955066

'EPWL-70'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius size between 1.25mm & 5.25mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240955066
Expiry date:
30/09/2029
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval

#240255057

'3E60B11P & 3E70B03P'. Black coloured, compression moulded EPDM materials. Shore hardness 60 & 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240255057
Expiry date:
28/02/2029
Approval Holder:
Blatt & Co GmbH
Company Name
Blatt & Co GmbH
Address
IM Klauenfuss 16, D 74172 Neckarsulm
Country
Germany
Phone
Tel: +49 7132 976117

View All Listings by this Company

Print This Approval

#2303560

‘0548’. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. Between March 2023 and August 2023, the material was for use with water up to 23°C. Between September 2023 and March 2028, the material is for use with water up to 80°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303560
Expiry date:
31/03/2028
Approval Holder:
Wilhelm Kachele GmbH
Company Name
Wilhelm Kachele GmbH
Address
Jahnstrasse 9, D-73235 Wilhelm Teck
Country
Germany
Phone
Tel: +49 7023 2038 Fax: +49 7023 103 188

View All Listings by this Company

Print This Approval

#241055077

'EP80R-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.5mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055077
Expiry date:
31/10/2029
Approval Holder:
ATUSA GRUPO EMPRESARIAL, S.A.
Company Name
ATUSA GRUPO EMPRESARIAL, S.A.
Address
Pol. Industrial ATUSA-Agurain, S/N 01200 Salvatierra (Álava- España)
Phone
+34 945 18 00 00
General Email
info@atusa.es

View All Listings by this Company

Print This Approval

#241155036

'798F'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241155036
Expiry date:
30/11/2029
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#250155010

'E50B01, E70B01 & E80B01'. Black coloured, compression moulded EPDM material. Shore hardness between 50, 70 & 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250155010
Expiry date:
31/01/2030
Approval Holder:
Suzhou Chengda Rubber Co. Ltd.
Company Name
Suzhou Chengda Rubber Co. Ltd.
Address
No. 25 Yue Yang Road, Yue Wang Industry Zone, Shaxi Zhen, Taicang City
Country
China

View All Listings by this Company

Print This Approval

#240755071

'CERULEAN EP 14 (KIEP14)'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755071
Expiry date:
31/07/2029
Approval Holder:
Industrial Spares Manufacturing and Trading Co.
Company Name
Industrial Spares Manufacturing and Trading Co.
Address
66 & 77, Functional Developed Plots, Perungudi, Chennai 600096
Country
India

View All Listings by this Company

Print This Approval

#241255023

'8550C'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255023
Expiry date:
31/12/2029
Approval Holder:
Tianjin Qichang Valve Manufacturing Co., Ltd.
Company Name
Tianjin Qichang Valve Manufacturing Co., Ltd.
Address
No.16, Huoju Rd, Beizhakou Economic Development Zone, Jinnan District, Tianjin
Country
China

View All Listings by this Company

Print This Approval

#241255031

'EP55 & EP70'. Black coloured, compression moulded EPDM materials. Shore hardness 55 & 70. Tested in-radii size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255031
Expiry date:
31/12/2029
Approval Holder:
Umm Al Quwain Rubber Industries Ltd (URIL)
Company Name
Umm Al Quwain Rubber Industries Ltd (URIL)
Address
PO Box 79, Umm Al Quwain
Country
United Arab Emirates
Phone
Tel: +791 6671320 Fax: +791 6671221

View All Listings by this Company

Print This Approval

#250255013

'51M6630'. Black coloured, injection moulded EPDM material. Shore hardness 70A. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250255013
Expiry date:
28/02/2030
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#241255041

'EPDM50P - ELAST45901, EPDM60P - ELAST46901, EPDM70P - ELAST47901 & EPDM80P - ELAST48901’. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255041
Expiry date:
31/12/2029
Approval Holder:
SPC Corporate Ltd.
Company Name
SPC Corporate Ltd.
Address
Cory Way, West Wiltshire Trading, Westbury, Wiltshire
Postcode
BA13 4QT

View All Listings by this Company

Print This Approval

#241255065

'CSTD/BS6920-BA60' (shore hardness 60), 'CSTD/BS6920-BA70' (shore hardness 70) and 'CSTD/BS6920-BA75' (shore hardness 75). Black coloured, compression moulded EPDM materials. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255065
Expiry date:
31/12/2029
Approval Holder:
Zeta Kaucuk A.S.
Company Name
Zeta Kaucuk A.S.
Address
Hasanaga OSB Mah.14. Cadde 12/2 Nilufer, Bursa
Country
Turkey

View All Listings by this Company

Print This Approval

#250255017

'Precision782628 EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250255017
Expiry date:
28/02/2030
Approval Holder:
Guangzhou Precision Rubber & Plastic Co., Ltd.
Company Name
Guangzhou Precision Rubber & Plastic Co., Ltd.
Address
No. 1-6, Qishan Huancun Middle Street, Xiuquan Avenue, Huadu District, Guangzhou City, Guangdong Province
Country
China

View All Listings by this Company

Print This Approval

#250255026

'E633'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250255026
Expiry date:
28/02/2030
Approval Holder:
Semperit Technische Produkte GmbH
Company Name
Semperit Technische Produkte GmbH
Address
Triester Bundesstrasse 26, A-2632 Wimpassing im Schwarzatale
Country
Austria
Phone
+43 2630 310 0 Fax: +43 2630 475
General Email
office@semperit.at

View All Listings by this Company

Print This Approval

#250355017

'EP011470P(KAWN)'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250355017
Expiry date:
31/03/2030
Approval Holder:
Chang Horing Rubber Co., Ltd.
Company Name
Chang Horing Rubber Co., Ltd.
Address
No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien
Country
Taiwan
Phone
+886 4 7810868

View All Listings by this Company

Print This Approval

#241255075

'51M7568'. Black coloured, injection moulded EPDM material. Shore hardness 75 ShA. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255075
Expiry date:
31/12/2029
Approval Holder:
WOCO GmbH & Co. KG
Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16, D 63628 Bad Soden - Salmünster
Country
Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

Print This Approval

#250455013

'AA7BCZ'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250455013
Expiry date:
30/04/2030
Approval Holder:
Gummiwerk KRAIBURG GmbH & Co. KG
Company Name
Gummiwerk KRAIBURG GmbH & Co. KG
Address
Teplitzer Strasse 20 D – 84478 Waldkraiburg
Country
Germany
Phone
+49 8638 61-0
General Email
info@kraiburg-rubber-compounds.com

View All Listings by this Company

Print This Approval

#250355087

'ZXMFJ-50 SEALING'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius 1.25mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250355087
Expiry date:
31/03/2030
Approval Holder:
Baoding Zhongxing Seals Manufacturing Co., Ltd.
Company Name
Baoding Zhongxing Seals Manufacturing Co., Ltd.
Address
Da CiLiang, Xushui District, Baoding City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.