Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2106031

Spring loaded resilient trim, in-line check valve cartridge with plastic guides and stem and EPDM seals within a plastic housing. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C

Section:: 0026 Backflow Prevention Devices
Section Subtitle:: SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:: 2106031
Marking:: Korie, 1st 4 digits of product code, (e.g. OF14) and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: OF14200000 DN14, OF15200000 DN15, OF20200000 DN20, OF25200000 DN25.

Approval Holder:: Yuhuan Korie Plastic Factory

Company Name
Yuhuan Korie Plastic Factory
Address
Technology Industry Functional Area, Chumen Village Yuhuan
Country
Zhejiang

View All Listings by this Company

WRAS Approval Number: #2110337

Range of check valve cartridges with plastic bodies to be housed in specifically dimensioned bodies. The product incorporates a plastic flow regulator. Maximum working pressure 16.0 bar & maximum operating temperature 65°C.

Section:: 0026 Backflow Prevention Devices
Section Subtitle:: SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:: 2110337
Size:: DN10
Marking:: Neoperl, flow arrow, CV15 on body
Installation Requirements:: R001
Expiry date:: 31/10/2026
Model:: Description Part Code CV15-FR 2,0L 31.2004.1 CV15-FR 3,0L 31.2006.1 CV15-FR 3,5L 31.2007.1 CV15-FR 4,0L 31.2008.1 CV15-FR 1.2 gpm 31.2009.1 CV15-FR 5,0L 31.2010.1 CV15-FR 1.5 gpm 31.2011.1 CV15-FR 6,0L 31.2012.1 CV15-FR 1.75 gpm 31.2013.1 CV15-FR 7,0L 31.2014.1 CV15-FR 2.0 gpm 31.2015.1 CV15-FR 8,0L 31.2016.1 CV15-FR 2.2 gpm 31.2017.1 CV15-FR 9,0L 31.2018.1 CV15-FR 2.5 gpm 31.2019.1 CV15-FR 10,0L 31.2020.1 CV15-FR 12,0L 31.2024.1 CV15-FR 14,0L 31.2028.1 CV15-FR 15,0L 31.2030.1 CV15-FR 16,0L 31.2032.1

Approval Holder:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

WRAS Approval Number: #2311336

Range of tundishes incorporating a plastic or coated, mild steel body. Maximum operating temperature 85°C.

Section:: 0046 Backflow Prevention Devices
Section Subtitle:: Tundish(s) air break to drain.
WRAS Approval Number:: 2311336
Size:: See model
Marking:: Altecnic and product info on body. Some models are also marked with the date of manufacture. The code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019.
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: 128-2001 CST 1F x 1 ¼”F Straight Tundish. 128-2003 CST 1 ½”F x 2”F Straight Tundish. 128-2004 CST 2”F x 2 ½”F Straight Tundish. 128-2005 CST 2 ½”F x 3”F Straight Tundish. 128-4001 CST 15mm x 22mm Straight Tundish. 128-4002 CST 15mm x 22mm Straight Tundish. 128-4003 CST 15mm x 22mm Straight Tundish. 128-4004 CST 22mm x 28mm Straight Tundish. AL-400010 15mm x 22mm Straight Tundish. AP-400010 15mm x 22mm Straight Tundish. AP-400012 15mm x 22mm Straight Tundish. G-128-2201 CST ½” M x ¾” M Angled Tundish. G-128-2010 CST 15mm x 22mm Straight Dry Trap Tundish. Model added May 2024: AP-400011 22mm x 28mm Straight Tundish. Model added September 2024: 128-2002CST 1 ¼” BSP(F) x 1 ½”BSP(F).

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2306013

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 Bar.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 2306013
Size:: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:: Omasa on operating member
Installation Requirements:: R001 R006 R010
Expiry date:: 30/06/2028
Model:: M202075

Approval Holder:: KAIPING OMASA SANITARY WARE INDUSTRY CO., LTD

Company Name
KAIPING OMASA SANITARY WARE INDUSTRY CO., LTD
Address
NO.65 LONGTANG XI RD. SHUIKOU TOWN, KAIPING CITY GUANGDONG,CHINA

View All Listings by this Company

WRAS Approval Number: #2305071

Range of wall mounted, two-hole, single outlet (fixed) combination taps assemblies (brass bodies - in various finishes), incorporating ceramic cartridge headworks with various operating members. The spout outlets incorporate plastic aerators. The inlet of the spout outlets incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 0510 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 2305071
Note:: The rough set is not supplied as part of this approval.
Size:: ½” BSP (F) rough set
Marking:: SHS logo on underside of spout
Installation Requirements:: R001 R010 R040
Expiry date:: 31/05/2028
Model:: T2020-1YY-XX (180mm Spout Length) T2020-2YY-XX (200mm Spout Length) Models added October 2024 T2020-120YY-XX (120mm Spout Length) T2020-140YY-XX (140mm Spout Length) Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: CTL = Lever Two. CTR = Knob-Fin. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish. URM = Urban Brass Matt Lacquered.

Approval Holder:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company