Range of water meters with plastic bodies. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1505 Water Meters

Size:

DN50, DN80 & DN100

Marking:

Bermad logo and flow arrow on body. Bermad logo, model and size on adhesive label on top casing.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

MUT7000

Approval Holder:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

Range of water meter chambers with plastic or DZR brass body manifold assemblies. The inlet incorporates a screw down isolation valve or quarter turn isolation valve (DZR brass model) & the chamber incorporates non-return valves (not suitable for back flow protection). Maximum working pressure 12.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

Please refer to model.

Marking:

GPS logo, part number, flow arrow, pressure and date of manufacture (DD/MM/YYYY) on adhesive label on body

Installation Requirements:

R001 R008

Expiry date:

30/09/2028

Model:

T25T25T – 25mm PE pushfit inlet X outlet P20P20P – 25mm PE pushfit inlet X outlet P25P25P – 20mm PE pushfit inlet X outlet HP25T25 – 25mm PE pushfit inlet X outlet HT25P25 – 25mm PE pushfit inlet X outlet HP20T25 – 20mm PE pushfit inlet X 25mm PE pushfit outlet HT25P20 – 25mm PE pushfit inlet X 20mm PE pushfit outlet C34M34M - 3/4" BSP (F) inlet X outlet

Approval Holder:

Aliaxis UK Ltd.

Company Name

Aliaxis UK Ltd.

Address

35 St Peter’s Road, Huntingdon

Postcode

PE29 7DA

Country

United Kingdom

Phone

01622852761

General Email

david.cousins@aliaxis.com

View All Listings by this Company

Range of vertical multistage pumps with cast iron bodies with a black electrodeposition coating, stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: MVX 30 & MVX 45- 32.0 bar, MVX 65 & MVX95 VR - 25.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305084

Size:

DN65 - DN100

Marking:

Sea-Land SRL, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

Code example - MVX range: MVX 30 /13 A B C D E F G H J K L M N. Where: MVX = Pump model 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). MVX30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); MVX45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); MVX65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); MVX95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Approval Holder:

SEA-LAND SRL

Company Name

SEA-LAND SRL

Address

Via. E. Mattei 25 Torreglia (PD)

Postcode

35038

Country

Italy

Phone

+39 049 5212944

General Email

info@sea-land.it

View All Listings by this Company

Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor, pressure vessel and a non-return valve integral to the pump chamber. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2204362

Size:

1” BSP (F)

Marking:

HW (Company logo) and model number other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2027

Model:

HMPP V JVS 10 (370W), 25m (Rated Head), HMPP V JVS 15 (550W), 24m (Rated Head) & HMPP V JVS 65 (750W), 30m (Rated Head) Water Booster Pumps.

Approval Holder:

HWS PUMPS & VALVES CANADA INC.

Company Name

HWS PUMPS & VALVES CANADA INC.

Address

398-2416 MAIN ST VANCOUVER BC V5T 3E2 CANADA

View All Listings by this Company

Range of shower handsets, (plastic bodies – various finishes) incorporating a plastic flow regulator in the inlets.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2310904

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Ideal standards on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2028

Model:

A957064## IdealRain Handspray A957146## IdealRain Handspray BD580## IdealRain Handspray Finishes where ## can be RO (Rosé), XG (Silk Black), SI (Silver), AA (Chrome) Models added July 2025 BE217## IdealRain Handspray B953418## IdealRain Handspray BE218## IdealRain Handspray B953417## IdealRain Handspray BD990## IdealRain Handspray

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company