'Strongcoat EPW-P'. Site applied, two-component, light grey coloured (once applied) epoxy coating. Mix Part A (light grey coloured liquid) with Part B (orange coloured liquid) in a 8.1:3.78 volume ratio and apply coat 1 as per manufacturer's TDS 06-0020-A-2021. Cure for 24 hours@23°C. Mix and apply coat 2 in the same way as coat 1 and cure for 7 days@23°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2312565

Expiry date:

31/12/2028

Approval Holder:

DCP Saudi Co.

Company Name

DCP Saudi Co.

Address

Sulay Industrial Area, Istanbul St. Riyadh

Country

Saudi Arabia

View All Listings by this Company

‘Sika MonoTop®-1010’, one-part cementitious bonding primer for use with ‘Sika MonoTop®-615’ one-part cementitious repair mortar. Mix ‘Sika MonoTop®-1010’ with tap water in the ratio of 25kg:5.25 litres. Apply as per manufacturer’s Product Data Sheet ‘020302020010000054, March 2021, Version 01.01’. Mix ‘Sika MonoTop®-615’ with tap water in the ratio of 25kg:3.8 litres and apply immediately to ‘Sika MonoTop®-1010’ as per manufacturer’s Product Data Sheet ‘020302040030000198, December 2021, Version 02.02’. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5063 Concrete, Cement and Mortar

Section Subtitle:

Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.

WRAS Approval Number:

2305561

Expiry date:

31/05/2028

Approval Holder:

Sika Ltd.

Company Name

Sika Ltd.

Address

Watchmead, Welwyn Garden City, Hertfordshire

Postcode

AL7 1BQ

Country

United Kingdom

Phone

01707 394444

General Email

sales@uk.sika.com

View All Listings by this Company

'DESCAFLEX PWH-300 601701, 601568 & 601700'. Range of black coloured, extruded polyethylene cables consisting of an outer sheath (available in two different thicknesses) and three or four inner cables. For use with water up to 85°C.

Section:

5140 Hoses & Tubing

Expiry date:

31/05/2029

Approval Holder:

Desca AG

Company Name

Desca AG

Address

Lerzenstrasse 14, CH-8953 Dietikon

Country

Switzerland

View All Listings by this Company

'Vinoleo SS'. Colourless lubricant to be applied in accordance with manufacturer's TDS reference '163460 version 2'. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/05/2029

Approval Holder:

MacDermid Enthone Ltd.

Company Name

MacDermid Enthone Ltd.

Address

198 Golden Hillock Road, Birmingham

Postcode

B11 2PN

View All Listings by this Company

'LUBKOTE® E352, LUBKOTE® SG96(N96), LUBKOTE® SG98(N98)'. White coloured lubricants. Apply as per manufacturer's product data sheet 'YC20231201-1'. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

30/04/2029

Approval Holder:

Yuchen Tech (HK) Co. Ltd.

Company Name

Yuchen Tech (HK) Co. Ltd.

Address

RM 2914 (B), Ho King Commercial Centre, 2-16 Fa Yuen Street, Mongkok

Country

Hong Kong

View All Listings by this Company