Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241104026

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201). The inlet incorporates a stop valve. Model MB77025AM Matrix Single (CV) incorporates a single check valve cartridge and model MB77025DCV Matrix Dual (DCV) incorporates two, single check valve cartridges however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 20mm, 25mm & 32mm pushfit
Marking:: Atplas logo on body.
Installation Requirements:: R001 R008
Expiry date:: 30/11/2029
Model:: MB77025AM Matrix Single (CV) MB77025DCV Matrix Dual (DCV)

Product Images

Approval Holder:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

WRAS Approval Number: #241104028

Range of water meter manifolds with plastic bodies. The inlets incorporate a stop valve. Model MB77025CG Matrix Single (CV) incorporates a single check valve cartridge and model MB77025CGDCV Matrix Dual (DCV) incorporates two, single check valve cartridges however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (F)
Marking:: Atplas logo on body.
Installation Requirements:: R001 R008
Expiry date:: 30/11/2029
Model:: MB77025CG Matrix Single (CV). MB77025CGDCV Matrix Dual (DCV).

Product Images

Approval Holder:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

WRAS Approval Number: #250204002

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201) and copper pipe. The products incorporate a drain off valve, plastic strainer and a single check valve cartridge however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm & 22mm Compression. 25mm Pushfit.
Marking:: Talbot on body
Installation Requirements:: R001 R008 R511
Expiry date:: 28/02/2030
Model:: MA3261515AM Internal Meter Manifold Drain off failed 1113.1 MA3261522AM Internal Meter Manifold Drain off MA3262215AM Internal Meter Manifold Drain off MA3262222AM Internal Meter Manifold Drain off failed 1113.1 MA3262515AM Internal Meter Manifold Drain off MA3262522AM Internal Meter Manifold Drain off MA3261515BM Internal Meter Manifold Blank plug MA3261522BM Internal Meter Manifold Blank plug MA3262215BM Internal Meter Manifold Blank plug MA3262222BM Internal Meter Manifold Blank plug MA3262515BM Internal Meter Manifold Blank plug MA3262522BM Internal Meter Manifold Blank plug

Approval Holder:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

WRAS Approval Number: #240702036

Range of test port assemblies with DZR brass bodies. Maximum working pressure 25.0 Bar. Maximum operating temperature 100°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” ULF (15mm ULF), ½” LF (15mm LF), ½” (15mm), ¾” (20mm), 1” (25mm), 1”1/4” (32mm), 1”1/2” (40mm), 2” (50mm).
Marking:: RUBINETTERIE logo, flow arrow, thread size, DN, PN, DR and batch number on body.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: B-Heat - 200402.

Product Images

Approval Holder:: Rubinetterie Bresciane Bonomi S.p.A

Company Name
Rubinetterie Bresciane Bonomi S.p.A
Address
Via Massimo Bonomi, 1 Gussago (BS)
Postcode
25064
Country
Italy
Phone
+39 030 82 50 212

View All Listings by this Company
Manufacturer:: Rubinetterie Bresciane Bonomi S.p.A

Company Name
Rubinetterie Bresciane Bonomi S.p.A
Address
Via Massimo Bonomi, 1 Gussago (BS)
Postcode
25064
Country
Italy
Phone
+39 030 82 50 212

View All Listings by this Company

WRAS Approval Number: #241102710

Nova-Flo’ inline flow control device with a plastic body. The product is intended to restrict the flow of water to a bath or basin if water level reaches the overflow. Float located within the overflow pathway activate flaps on each inlet to restrict the flow prior to the taps being closed. Maximum working pressure: 12 Bar. Maximum working temperature: 60°C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 241102710
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Claims of the effectiveness of this device to restrict the water supply are made by the manufacturer and are not considered part of the approval listing.
Size:: See models below
Marking:: Nova-Flo & WRAS on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 30/11/2029
Model:: NF3: 22MM Spigots inlet/outlet

Product Images

Manufacturer:: About Time Design Ltd

Company Name
About Time Design Ltd
Address
Unit 19, Cheltenham Trade Park, Cheltenham, Gloucestershire, GL51 8LZ

View All Listings by this Company

WRAS Approval Number: #241102713

Range of plastic pressure sensors. Maximum working pressure: 15.99 Bar. Maximum operating temperature 90.0°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Part number, data code (X = last digit of year & YYY = day of year) and Sensata on body.
Installation Requirements:: R001
Expiry date:: 30/11/2029
Model:: 126CP3 - ¼” BSP M, 126CP4 - 3/8” BSP M, 126CP6 - 12mm OD.

Product Images

Manufacturer:: Sensata Technologies de Mexico S de RL de CV

Company Name
Sensata Technologies de Mexico S de RL de CV
Address
Av. Aguascalientes Sur #401 Ex-Ejido Ojo Caliente Aguascalientes
Postcode
20290
Country
Mexico
Phone
+52 449 910 5500

View All Listings by this Company

WRAS Approval Number: #241104707

Bias chamber incorporating an EPDM diaphragm and ‘O’-ring with a brass body. Maximum working pressure 35.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 7/8-14 UNF male
Marking:: Technolog & product info on label.
Installation Requirements:: R001
Expiry date:: 30/11/2029
Model:: CGF03S06

Product Images

Manufacturer:: Technolog Limited

Company Name
Technolog Limited
Address
Ravenstor Road Wirksworth
Postcode
DE4 4FY
Country
United Kingdom
Phone
01629 823611

View All Listings by this Company

WRAS Approval Number: #241102712

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (AMS models), 4.0 bar (EDH & EMH models) 8.0 bar (LVS models). Maximum operating temperature 85°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241102712
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: LEO on cover. LEO, model & technical information on date label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2029
Model:: EDH (m)XX-XX-F-E 1.m: different phase. --m: single phase, none: three phase. 2.XX: Rated flow (m³/h, range:2~20 m³/h. 3.XX: Impeller progression x10, progression range:1~6. 4.F: F type motor 5.E：E type end connection mode and size -- Rated flow (2 m³/h) :G1"XG1" -- Rated flow (4 m³/h) :G1¼"XG1¼" -- Rated flow (10-20 m³/h) :G2"XG2" AMS(m)XXX-XX-E 1.m: different phase. --m: single phase，none: three phase 2.XXX: Rated flow（L/min） 3. XX: Rated power（kW）. 4.E：E type end connection mode and size -- Rated flow(70-120m³/h) : G1¼"XG1" -- Rated flow(210m³/h) :G1½"XG1¼" -- Rated flow (370 m³/h): G2"XG1¼" LVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 EMH (m)XX-XX\XX-SE 1.m: different phase. --m: single phase，none: three phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Product Images

Manufacturer:: Leo Group Pump(Zhejiang) Co., Ltd

Company Name
Leo Group Pump(Zhejiang) Co., Ltd
Address
No 1,3rd street, East Industry Center,Wenling, Zhejiang, China

View All Listings by this Company

WRAS Approval Number: #241102718

Range of pumps with stainless steel bodies. Maximum working pressure depends on model, please refer to model. Maximum operating temperature 65°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241102718
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Clarke Pump, model & technical info on label.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2029
Model:: MHS90 4M MSP490: G1” BSP F (4.3bar). MHS90 5M MSP590: G1” BSP F (5.3bar). MHS90 6M MSP690: G1” BSP F (6.4bar). MHS120 4M MSP4120: G1¼” BSP F X G1” BSP F (4.5bar). MHS120 5M MSP5120: G1¼” BSP F X G1” BSP F (5.7bar). MHS120 6M MSP6120: G1¼” BSP F X G1” BSP F (6.9 bar).

Product Images

Approval Holder:: Clarke International Limited

Company Name
Clarke International Limited
Address
Sealand House, Hemnall Street, Epping, Essex, CM16 4LG UK

View All Listings by this Company

WRAS Approval Number: #241104702

Range of pumps with a plastic body. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241104702
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (M)
Marking:: Aquastrong logo on body. Aquastrong logo, model and other tech info on adhesive label.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2029
Model:: SMART-32, SMART-32Z, SMART-42, SMART-42Z, SMART 45, AQUA SMART 45 & SMART MINI.

Product Images

Approval Holder:: Aquastrong (Shanghai) International Trading Co., Ltd.

Company Name
Aquastrong (Shanghai) International Trading Co., Ltd.
Address
RM 133, BUILDING 5 (SOUTH), NO.3131 JINSHAJIANG ROAD, JIADING DISTRICT, SHANGHAI
Country
China

View All Listings by this Company