Directory Search Results

Print List

#241055032

'EPDM 70: Blaco_Water/Food-EE70’. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70 A. Tested in-radius size 0.75mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
241055032
Expiry date:
31/10/2029

Approval Holder:
Blatt & Co GmbH
Company Name
Blatt & Co GmbH
Address
IM Klauenfuss 16, D 74172 Neckarsulm
Country
Germany
Phone
Tel: +49 7132 976117

View All Listings by this Company

Print This Approval


#241055035

'EPDM B1-4771'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
241055035
Expiry date:
31/10/2029

Print This Approval


#241002030

Range of stop valves with plastic bodies. The valves incorporate a built in solenoid valve which is operated by a switch located on the valve or by a remote control. The leak detector supplied with model SVSM66MRD is not connected to any water pipe, is independent of the valve and is intended to be installed in the area at risk of leakage. It is intended to detect leakage and sends an electrical signal to close the valve. For use with copper pipe (manufactured to BS EN1057), PEX pipe (manufactured to BS7291-3) and PB pipe (manufactured to BS7291 -2). Maximum working pressure 10.0 bar. Cold water use only

Section:
2336 Valves
Section Subtitle:
Stop - plastic.
WRAS Approval Number:
241002030
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm pushfit
Marking:
TLC (Twistloc logo – manufacturer’s brand) on body. TLC and size on inlet connection.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
SVSM66MR Smart Stop Valve. SVSM66MRD Smart Stop Valve with Leak Detector.
Product Images

Approval Holder:
SNC Corporation
Company Name
SNC Corporation
Address
30, Baekbeom-ro 678 beon-gil Seo-gu Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200
General Email
nchoi@twistloc.com

View All Listings by this Company
Manufacturer:
SNC Corporation
Company Name
SNC Corporation
Address
30, Baekbeom-ro 678 beon-gil Seo-gu Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200
General Email
nchoi@twistloc.com

View All Listings by this Company

Print This Approval


#241004027

Range of single-hole, multiple outlet, swivel, combination tap assemblies (brass bodies - various finishes) a quarter turn ceramic disc controlling the flow to the swivel arm with a dome type operating member and a ceramic cartridge with a single lever controlling the flow to the pull-out spray outlet incorporating a plastic aerator. The spray outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature for boiling water pathway 98°C, for mixed water pathway 65C and purified water pathway 85°C

Section:
0683 Combination Tap Assemblies
Section Subtitle:
Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.
WRAS Approval Number:
241004027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections
Marking:
NLB on body.
Installation Requirements:
R001 R006 R009 R010 R090 R170
Expiry date:
31/10/2029
Model:
14013** & 13012D** ** represent different finishes No suffix: Chrome plated H: Black N: Nickel brushed GJS: Zirconium gold brushed G: Zirconium gold QTSL: Brushed bronze bright QTS: Brushed bronze matte TJ: Titanium gold TJLS: Titanium gold brushed MGJ: Rose gold MGJL: Rose gold brushed HGT: Red bronze HTL: Yellow bronze brushed HTS: Red bronze brushed PVDQH: Gun grey HQ: Gun grey brushed Q: Bronze DYB: Matte white STS: Acid copper brushed BZ: Spray pearl white DMGJ: Light rose gold brushed
Product Images

Manufacturer:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU
Country
China

View All Listings by this Company

Print This Approval


#241002038

Range of single hole, single outlet (fixed) electronically controlled tap assemblies. Incorporating a solenoid valve activated via an infra-red sensor. The inlets to the control box incorporate stainless steel strainers and the outlet incorporates a plastic aerator. Maximum working pressure: 8 Bar Maximum operating temperature: 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
241002038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot x 1/2" BSP (F) adaptor connected to a ½” BSP (M) x ½” BSP (M) solenoid connected to stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:
Stern Logo on tap cover
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
225610: Touch free B AB1953 & 225710: Touch free E AB1953
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#250104701

Bottom entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250104701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (M) Plastic 1/2” BSP (M) Brass 3/8” BSP (M) Brass
Marking:
R&T, model & BS1212-4 on body
Installation Requirements:
R001 R550 R560
Expiry date:
31/01/2030
Model:
A1370 13½” A1370 11½” A1370 10”

Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422

View All Listings by this Company

Print This Approval


#240704740

Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies with a drain port located between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
240704740
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
Albion Logo etched on body. Size, flow arrow mould on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
ART 37 15mm compression, ART 37 22mm compression ART 37 28mm compression

Approval Holder:
Albion Valves (UK) Limited
Company Name
Albion Valves (UK) Limited
Address
9a Fallbank Industrial Estate Dodworth Barnsley
Postcode
S75 3LS
Country
United Kingdom
Phone
01226 729900
General Email
samjed@albionvalvesuk.com

View All Listings by this Company

Print This Approval


#241004045

‘Precolor’ range of one piece, pre-insulated cold water storage cisterns and covers for domestic water storage, supplied with a wholesome water kit. The cisterns walls are available in grey, blue, green, white, red and anthracite grey (external) colours and the cistern base is straw coloured. For cold water use only. From November 2024 the water contact layer of the cistern base and walls is available in grey or straw colours. The outer layer of the cistern base is available in blue, green, white, red and anthracite grey colours.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
241004045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
20 litres – 42,000 litres.
Marking:
Precolor on adhesive label on body.
Installation Requirements:
R001 R270 R280
Expiry date:
31/10/2029
Model:
Precolor 20 - 50,000. Precolor Excell 40,001 – 42,000.

Manufacturer:
Precolor Sales Limited
Company Name
Precolor Sales Limited
Address
Newport Road, Market Drayton, Shropshire
Postcode
TF9 2AA
Phone
01630 657281

View All Listings by this Company

Print This Approval


#241188006

Range of aerators with plastic bodies and EPDM ‘O’-rings. Maximum operating temperature 65°C Open outlet use only

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
241188006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
STD – M22 and M24
Marking:
Neoperl on body
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
Perlator Honeycomb Clinic snap range comprising of models: PL-HC-STD-CLINIC-SNAP-OR-V-lam Red - 01.3631.000. PL-HC-STD-CLINIC-SNAP-OR-V-lam Yellow - 01.3632.000. PL-HC-STD-CLINIC-SNAP-OR-V-lam Blue - 01.3633.000. PL-HC-STD-CLINIC-SNAP-OR-V-lam Green - 01.3634.000. PL-HC-STD-CLINIC-SNAP-OR-V-lam Grey - 01.3635.000. Clinic Honeycomb range comprising of models: PL-HC CLINIC-STD-IT-Z-lam Blue - 40.2102.0A0. PL-HC CLINIC-STD-IT-Z-lam Green - 40.2102.0B0. PL-HC CLINIC-STD-IT-Z-lam Red - 40.2102.0C0. PL-HC CLINIC-STD-IT-Z-lam Yellow - 40.2102.0F0. PL-HC CLINIC-STD-IT-T-lam Blue - 40.2110.0A0. PL-HC CLINIC-STD-IT-T-lam Green - 40.2110.0B0. PL-HC CLINIC-STD-IT-T-lam Red - 40.2110.0C0. PL-HC CLINIC-STD-IT-T-lam Yellow - 40.2110.0F0. Clinic Neostrahl range comprising of models: FS CLINIC-STD IT Red - 02.4060.000. FS CLINIC-STD IT Yellow - 02.4061.000. FS CLINIC-STD IT Green - 02.4062.000. FS CLINIC-STD IT Blue - 02.4063.000.
Product Images

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#241104003

Range of ceramic cartridge headworks with plastic bodies. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
241104003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Galatron Plast on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
0125CFOC3-000/G25 EVO C3 - 0/90° DX: 25.03mmOD 0125AFOC1-000/G25 Open EVO C1 : 25.07mmOD
Product Images

Manufacturer:
Galatron Plast Spa
Company Name
Galatron Plast Spa
Address
Via Dell' Artigianato 22, Castiglione Delle Stiviere, 46043 Mantova
Country
Italy
Phone
+39 0376 630778 Fax: +39 0376 632333

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 970 of 1111

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.