Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2012003

Range of gas fired water heaters incorporating stainless steel strainers on the inlets. Maximum working pressure 10.0 Bar Maximum working temperature 85˚C

Section:: 1400 Heaters
Section Subtitle:: Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:: 2012003
Size:: 1/2" BSP (M) inlet and outlets
Marking:: VANWARD on front of heater, VANWARD model and technical info on adhesive label on side of heater.
Installation Requirements:: R001 R140
Expiry date:: 31/12/2025
Model:: JSQ*FT-X** JSQ: mechanical exhaust gas water heater; *: Capacity(L); X**: appearance style (X11, X12, X13, X14) JSQ10FT-X11 JSQ10FT-X12 JSQ10FT-X13 JSQ10FT-X14 JSQ11FT-X11 JSQ11FT-X12 JSQ11FT-X13 JSQ11FT-X14 JSQ12FT-X11 JSQ12FT-X12 JSQ12FT-X13 JSQ12FT-X14 JSQ14FT-X11 JSQ14FT-X12 JSQ14FT-X13 JSQ14FT-X14 JSQ16FT-X11 JSQ16FT-X12 JSQ16FT-X13 JSQ16FT-X14 JSQ17FT-X11 JSQ17FT-X12 JSQ17FT-X13 JSQ17FT-X14 JSG*FT-X** JSG: Balanced gas water heater; *: Capacity(L); X**: appearance style (X11, X12, X13, X14) JSG10FT-X11 JSG10FT-X12 JSG10FT-X13 JSG10FT-X14 JSG11FT-X11 JSG11FT-X12 JSG11FT-X13 JSG11FT-X14 JSG12FT-X11 JSG12FT-X12 JSG12FT-X13 JSG12FT-X14 JSG14FT-X11 JSG14FT-X12 JSG14FT-X13 JSG14FT-X14 JSG16FT-X11 JSG16FT-X12 JSG16FT-X13 JSG16FT-X14 JSG17FT-X11 JSG17FT-X12 JSG17FT-X13 JSG17FT-X14

Product Images

Approval Holder:: Guangdong Vanward New Electric Co. Ltd.

Company Name
Guangdong Vanward New Electric Co. Ltd.
Address
13 Jianye Mid- Road Shunde High Tech Industry Development Zone
Country
Ronggui Shunde

View All Listings by this Company
Manufacturer:: Guangdong Vanward New Electric Co. Ltd.

Company Name
Guangdong Vanward New Electric Co. Ltd.
Address
13 Jianye Mid- Road Shunde High Tech Industry Development Zone
Country
Ronggui Shunde

View All Listings by this Company

WRAS Approval Number: #2012051

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system, incorporating a pressure relief valve set at 3.0 bar and expansion vessel on the primary circuit. The inlet of the replenishing valve between the primary and secondary circuits incorporate a plastic strainer. Maximum working pressure 2.5 bar (primary) and 6.0 bar (secondary). Maximum operating temperature 85˚C.

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 2012051
Note:: Please note that the inlet pipework connects to the flow sensor, no fittings or valves prior to this are supplied. Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with Schedule 2 paragraph 7 of the Water Supply (Water Fittings) Regulations 1999.
Size:: ½” BSP (M) inlet and outlet Secondary Circuit. ½” BSP (M) replenishing valve. ¾” BSP(M) inlet and outlet primary circuit.
Marking:: Strom on front of body. Model and technical info on adhesive label on side of body.
Installation Requirements:: R001 R140 R360
Expiry date:: 31/12/2025
Model:: Strom E range comprising of models: SBSP7C, SBSP11C & SBSP15C. SBTP18C, SBTP21C & SBTP24C. The number in model indicates kW rating.

Approval Holder:: STROM LTD

Company Name
STROM LTD

View All Listings by this Company

WRAS Approval Number: #2012341

Range of flow sensors with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C

Section:: 1530 Miscellaneous Fittings
Size:: ¾” BSP (M).
Marking:: Sika, part number and other information on adhesive label on cable. Flow arrow on body
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: Flow sensors type series VTY15 Models: VY1545abcdefgh ab:for body material (MA = Brass CW617N-DW, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd: for sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef: for electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh: for process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz ab: for body material (MA = Brass CW617N-DW, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy: for name of customer (5 digits, e.g. SCHMI, MUELL, …) zz: for consecutive number (2 digits, 01…99)

Product Images

Approval Holder:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company
Manufacturer:: SIKA Systemtechnik GmbH

Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company

WRAS Approval Number: #2012053

Range of isolation valves incorporating brass bodies and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 2012053
Size:: SEE MODEL
Marking:: Delabie on valve body (855755). Delabie on washer (855755UK).
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: 855755 Eccentric coupling STOP CHECK ½” BSP (M) x ¾” BSP (M) Offset Union 855755UK In-line STOP CHECK ½” BSP (M) x ¾” BSP (M)

Product Images

Approval Holder:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

WRAS Approval Number: #2011326

Range of submersible pumps with stainless steel bodies, impellers and shaft. The XPW range incorporates a strainer cowl on the suction end of the pump. The XPWA range features a stainless head which provides a threaded connection instead of the strainer. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2011326
Size:: XPW: 1¼” BSP (F). XPWA: 1¼” BSP (F) x 1½” BSP (F).
Marking:: Dutypoint, model and other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2025
Model:: (XPW)(i)(ii)-(iii) and (XPWA)(i)(ii)-(iii) ranges. Where: XPW or XPWA = range name. (i) = Nominal flow in m³/h x 10 (3, 5 or 9). (ii) = Number of stages x 10 (040-100). (iii) = Voltage/motor speed (M = single phase 230V, T = Three phase 400V, T230 = Three phase 230V. All of which can also be prefixed with 6 for 60Hz motor speed. Std. is 50Hz). Example codes: XPW3040-M & XPWA9090-T230.

Product Images

Approval Holder:: Dutypoint Ltd.

Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company