Directory Search Results

Print List

#241002051

Range of system 2000 of flange adaptors and connectors with ductile iron bodies (Blue Epoxy Coated) incorporating EPDM seals. For use with PE pipe manufactured to En 12201 & PVC Pipe manufactured to DIN 8062. Maximum working pressure: 16.0Bar Cold water use only.

Section:
1220 Fittings for use with Tube and Pipe
Section Subtitle:
Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:
241002051
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models below
Marking:
Hawle logo and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
System 2000 Range: 0400 DN50 – DN600 0430 DN63 – DN355 5045 DN80 & DN100 8075 DN63 – DN315 8515 DN63 – DN225 8525 DN63 – DN225 8535 DN63 – DN315 8545 DN63 – DN315 8555 DN63 – DN315 8557 DN63 – DN315
Product Images

Approval Holder:
E-Hawle Armaturenwerke GmbH
Company Name
E-Hawle Armaturenwerke GmbH
Address
Wagrainer Stabe 13 AT 4840 Vocklabruck

View All Listings by this Company

Print This Approval


#241204704

Dual flush, WC outlet valve. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
241204704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
2” BSP
Marking:
SIAMP on body.
Installation Requirements:
R001 R571 R582
Expiry date:
31/12/2029
Model:
Optima 50

Approval Holder:
Siamp
Company Name
Siamp
Address
4 Quai Antoine Premier BP 219 MC 98007
Country
Monaco
Phone
Tel: +377 9315 5375 Fax: +377 9205 7104
General Email
info@siamp.co.uk

View All Listings by this Company

Print This Approval


#241002039

Indirect heat interface unit with copper brazed, stainless-steel heat exchangers, providing heating and instantaneous hot water. The product incorporates an expansion vessel on the cold-water supply to the plate heat exchanger and a safety relief valve on the heating circuit set @ 2.5 bar. The DHW and heating circuits are both fitted with drain valves incorporating cover caps. Maximum working pressure 16 Bar (Primary), 10 Bar (DHW) & 3 Bar (Heating) Maximum operating temperature 95°C

Section:
1350 Heat Exchangers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4” BSP (M)
Marking:
YGHP, serial number, pressure, temperature and other technical information on adhesive label inside body
Installation Requirements:
R001 R140 R360 R511
Expiry date:
31/10/2029
Model:
YGHP E 018
Product Images

Manufacturer:
YGHP Ltd
Company Name
YGHP Ltd

View All Listings by this Company

Print This Approval


#241004721

Tudor range of above and under sink range of electrically heated vented water heaters (cased and insulated) incorporating an angle valve on the inlet for flow control. Maximum working pressure 3.5 bar. Maximum operating temperature 75°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
241004721
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Zip Water UK, Model and product info on adhesive label
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
T5UB5 Tudor Under Basin 5 Litre T5UB10 Tudor Under Basin 10 Litre T5OB5 Tudor Over Basin 5 Litre T5OB10 Tudor Over Basin 10 Litre
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company
Manufacturer:
Tiki Doo Stara Pazova
Company Name
Tiki Doo Stara Pazova
Address
Golubinacki Put 1B Stara Pazova 22300 Serbia
General Email

View All Listings by this Company

Print This Approval


#241002010

Range of in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) to 1½” BSP (M)
Marking:
ZENNER on cover. Flow arrow on body. Zenner and product info on meter face.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
176104 IUWS hydr. 2,5-110-1/2 D-cell 176105 IUWS hydr. 2,5-165-1/2 D-cell 176106 IUWS hydr. 2,5-170-1/2 D-cell 176672 IUWS hydr. 2,5-190-1/2 D-cell 176594 IUWS hydr. 4-105-3/4 D-cell 176107 IUWS hydr. 4-130-3/4 D-cell 176108 IUWS hydr. 4-165-3/4 D-cell 176139 IUWS hydr. 4-190-3/4 D-cell 183453 IUWS hydr. 4-220-3/4 D-cell 176140 IUWS hydr. 10-150-1 D-cell 181523 IUWS hydr. 10-160-1 D-cell 181525 IUWS hydr. 10-160-5/4 D-cell 176142 IUWS hydr. 10-260-5/4 D-cell 176519 IUWS hydr. 16-150-6/4 D-cell 176520 IUWS hydr. 16-200-6/4 D-cell 176521 IUWS hydr. 16-300-6/4 D-cell 176522 IUWS hydr. 25-300-2 D-cell
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company
Manufacturer:
Zenner Meters (Shanghai) Ltd.
Company Name
Zenner Meters (Shanghai) Ltd.
Address
No 15 Dongxing Road Songjiang Ind Zone Shanghai
Country
China

View All Listings by this Company

Print This Approval


#240902075

Range of in-line water meters with plastic bodies. The inlet incorporates a plastic filter. Maximum working pressure; 16 Bar Maximum operating temperature 50°C

Section:
1505 Water Meters
WRAS Approval Number:
240902075
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
All models available in body lengths of 165, 170 and 190mm
Size:
1" BSP (M)
Marking:
Contazara, Model and technical information on faceplate. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
CZ4000- Q3=4

Approval Holder:
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Company Name
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Address
Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Print This Approval


#241002014

Range of IUW ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature: 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models below, note all sizes listed in DN are flanged connections.
Marking:
Zenner, DN, Year of manufacture (YYYY) and technical information on dial face. Size & flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
160113 IUW Q3-25, DN50, Length 200mm 168288 IUW Q3-25, DN50, Length 270mm 173783 IUW Q3-25, DN50, Length 300mm 160115 IUW Q3-40, DN65, Length 200mm 168289 IUW Q3-40, DN65, Length 300mm 160117 IUW Q3-63, DN80, Length 225mm 168290 IUW Q3-63, DN80, Length 300mm 176100 IUW Q3-63, DN80, Length 225mm 184224 IUW Q3-63, DN80, Length 200mm 168291 IUW Q3-100, DN100, Length 360mm 173785 IUW Q3-100, DN100, Length 350mm 176101 IUW Q3-100, DN100, Length 250mm 169642 IUW Q3-160, DN125, Length 250mm 169643 IUW Q3-250, DN150, Length 300mm 171335 IUW Q3-250, DN150, Length 500mm 169645 IUW Q3-400, DN200, Length 350mm 169647 IUW Q3-630, DN250, Length 450mm 169648 IUW Q3-1000, DN300, Length 500mm
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company

Print This Approval


#241002027

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) ¾” BSP (M
Marking:
Janz logo, model code and other info on meter box
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Smartio DN15 Q3=2,5 R*** Smartio DN20 Q3=2,5 R*** Smartio DN20 Q3=4 R*** Body lengths DN15: 105 mm / 110mm / 115mm/ 134m / 142mm / 145mm / 160mm / 165mm / 170mm / 190mm / 220mm DN20: 105mm / 110mm / 115mm / 139mm /160mm / 165mm / 190mm / 220mm
Product Images

Manufacturer:
Janz Contagem e Gestão de Fluidos, SA
Company Name
Janz Contagem e Gestão de Fluidos, SA
Address
Av. Infante D. Henrique nº 286 Lisboa
Postcode
1950-421
Country
Portugal
Phone
00351 21 831 6000

View All Listings by this Company

Print This Approval


#241002034

Range of water meters with brass bodies with plastic impellers. LXSZ models incorporate a spherical valve on the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
LXSZxx: Laison name and logo on meter face. Flow arrow on body LXCxx: Laison name and logo on meter face. Flow arrow on plastic housing
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
LXSZxx & LXCxx Where xx denotes the inlet/outlet connections and can be replaced with any of the following: 15 = ¾” BSP (M) 20 = 1” BSP (M) 25 = 1.1/4” BSP (M)
Product Images

Approval Holder:
Hangzhou Laison Technology Co., Ltd.
Company Name
Hangzhou Laison Technology Co., Ltd.
Address
No.525 Xixi Road, Xihu district, Hangzhou, Zhejiang province, China

View All Listings by this Company

Print This Approval


#241002056

Range of water meters with cast iron bodies (blue epoxy coating). Maximum working pressure 16.0 Bar Maximum operating temperature 70.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50 (270mm, 300mm & 311mm) DN150 (300mm)
Marking:
Sensus,and product info on cover.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Cordonel
Product Images

Approval Holder:
Sensus UK Systems Ltd
Company Name
Sensus UK Systems Ltd
Address
North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU
Country
Basingstoke

View All Listings by this Company
Manufacturer:
Sensus GmbH Hannover
Company Name
Sensus GmbH Hannover
Address
Meineckestrasse 10 Laatzen 30880 Germany

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 937 of 1132

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.