Directory Search Results

Print List

#240204028

Range of water meter housings. The 4414-WMH-20 (threaded) model has a DZR brass body and a check valve cartridge on the inlet verified by test (suitable for backflow protection against Fluid Category 2). The 4414-WMH-1 & 4414-WMH-2 (compression) models have a brass body and an approved check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The compression models are for use with copper pipe (manufactured to EN 1057). Maximum operating pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1510 Water Meter Manifolds
Size:
see model
Marking:
Eagle and flow arrow on body. The 4414-WMH-20 model is also marked CR.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
4414-WMH-1: 15mm compression, 4414-WMH-2: 22mm compression, 4414-WMH-20: ¾” BSP (F).

Approval Holder:
SCE Technology (Ningbo) Co.,Ltd.
Company Name
SCE Technology (Ningbo) Co.,Ltd.
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#240204050

Range of wall & floor mounted, two hole, single outlet combination tap assemblies with brass bodies incorporating ceramic cartridge headworks with single lever operating members. Spout incorporates a plastic aerator. Products also incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M).
Marking:
Gessi on handle.
Installation Requirements:
R001 R010 R030
Expiry date:
28/02/2029
Model:
65113 (wall mounted), 65128 (floor mounted) + 65099 (floor mounting plate / roughing set).

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#240208003

Range of flow sensors with plastic bodies and rotors. Maximum working pressure: 10 Bar. Maximum operating temperature: 80°C.

Section:
1530 Miscellaneous Fittings
Size:
See model.
Marking:
Resideo, Model, Max temperature, Max pressure & made in Japan on the front face.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
C7195A 2001 – 1/2” BSP (M). C7195B 1001 – 3/4” BSP (M). C7195C 1009 – cartridge only, to be inserted in a ø25.2 mm manifold.

Approval Holder:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

Print This Approval


#240202028

Range of wall mounted shower outlets with chromium plated brass body. The product incorporates a stainless steel strainer, plastic flow regulator and an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature 65.0°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202028
Size:
½” BSP (M). Claims of flow rate are made by the manufacturer and not considered part of the listing.
Marking:
Dornbracht on body.
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
28504831 - Dornbracht YAMOU, 28504832 - Dornbracht YARRE, 28503831 - Dornbracht YAMOU, 28503832 - Dornbracht YARRE.
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#240204011

Range of shower handset with chrome plated or white plastic bodies. Colour coding discs are located on the face plates of specific models. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240204011
Note:
Open outlet use only. The products have not been tested or approved for claims of sterile or anti-microbial properties made by the approval holder.
Size:
½” BSP (M)
Marking:
T-Safe on body
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Proviso:
The models listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
02-071215: Hand shower C-L “Hygiene” - No colour code on the spray plate. 02-071216: Hand shower C-L “Hygiene” - Violet colour code on the spray plate. 02-071217: Hand shower C-L “Hygiene” - Yellow colour code on the spray plate. 02-071218: Hand shower C-L “Hygiene” - Green colour code on the spray plate. 02-071219: Hand shower C-L “Hygiene” - Blue colour code on the spray plate. 02-071220: Chrome plated Hand shower C-L “Hygiene” - No colour code on the spray plate.

Approval Holder:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company
Manufacturer:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 919 of 1553

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.