Range of end feed copper fittings for use with copper tube to EN 1057. The 950513, 950514, 950501, 950503 & 950502 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208817

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

CPS & date of manufacture MM/YY on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

237738, 237770, 950504, 950505, 950506, 950507, 950508, 950509, 953104 & 953105 Elbow 90 degree C X C: 8mm-108mm. 237740, 237769, 501657, 950510, 950511, 950512, 954699 & 954700 Street Elbow 90 degree Ftg X C: 8mm-108mm. 501643, 501764, 577336, 858891, 858892 & 858893 Street Elbow 45 degree Ftg X C: 8mm-108mm. 952608, 952609, 952610, 954695, 954696, 954697, 237739 & 237743 Elbow 45 degree C X C: 8mm-108mm. 954750 & 954751 Partial Crossover Ftg x C: 12mm-28mm. 954668, 954669 & 954670 Slip Straight Coupling C X C: 8mm-108mm. 237772, 237773, 950489, 950490, 950491, 950492, 950493, 950494, 953091, 953092 & 954675 Straight Coupling with groove C X C: 8mm-108mm. 237741, 799352, 950495, 950496, 953097, 953098, 954678, 954679, 954680, 954681, 954682, 954683, 954684, 954685, 954686, 954687, 954688, 954689, 954690, 908683, 908706 Fitting Reducer Ftg X C: 8mm-108mm. 950497, 953093, 953094, 953095, 953096, 953172 & 954691 Reducing Coupler C X C: 8mm-108mm and ½” - 1”. 237733, 237736, 950515, 950516, 950521, 950528, 950529, 953111, 953112 & 954713 Equal TEE CxCxC: 8mm-108mm. 237767,496119, 689717, 813643, 950517, 950518, 950519, 950520, 950522, 950523, 950526, 950527, 953169, 954717, 954719, 954720, 954721, 954722, 954723, 954724, 954727, 954728, 954729, 954730, 954732, 954733, 954734, 954735 & 954736 Reducing Tee CxCxC: 8mm-108mm. 237735, 237742, 945648, 950531, 952561, 953113, 953114, 954738, 954739 & 954740 Cap: 8mm-108mm. 953117 & 954749 Full Crossover C x C: 12mm-28mm. 909039 & 909054 Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). 952367 Return Bend Stop: 15mm-54mm. 909065, 909104, 950546 & 954776 Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). 954710 BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 954745 & 954746 STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 950513 & 950514 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 950501, 950503 & 950502 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of solid copper alloy and bi-metallic flanges. Solid models are bronze, bi- metallic models are bronze with an epoxy coated steel outer flange.

Section:

1530 Miscellaneous Fittings

Size:

15, 22, 28, 35, 42, 54, 66.7, 76.1, 108, 133, 159, 219mm. (DN10 - DN200).

Marking:

BS EN1092.3, PN, DN and AL on body.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

FLSG07/16- 15mm to 219mm. FLSG05C/16- 15mm to 219mm. FLG14/16- 15mm to 219mm. FLSG02/25- 15mm to 219mm. FLSG05C/25- 15mm to 219mm. FLG14/25- 15mm to 219mm.

Approval Holder:

Allpex Ltd.

Company Name

Allpex Ltd.

Address

261 Water Road, Abbeydale Industrial Estate, Wembley Middlesex

Postcode

HA0 1HX

Country

United Kingdom

Phone

00 44 208 810 4546

General Email

product@allpex.com

View All Listings by this Company

Range of chrome plated hand showers with plastic bodies. The inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2210003

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

DORNBRACHT on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2027

Model:

28014979 28018979. Model added December 2022 28018832

Product Images

Approval Holder:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

View All Listings by this Company

Overhead shower outlets with brass bodies (various finishes), incorporating EPDM O rings. Maximum working pressure: Open outlet Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2210048

Size:

½” BSP (M)

Marking:

Hansgrohe on wall bracket

Installation Requirements:

R001 R040

Expiry date:

31/10/2027

Model:

26 442 xxx 26 443 xxx XXX denotes to finish: available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets with plastic bodies (various finishes - see model). The E082051.XXXAWZZ and E082073.XXXAWZZ models incorporate a combined TPE washer and stainless steel strainer on the inlet. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2210358

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Almar Logo on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2027

Model:

E082027.XXXAWZZ Emotion Ø100 hand shower single jet, E082043.XXXAWZZ Emotion Ø130 hand shower single jet, E082051.XXXAWZZ Emotion Ø100 hand shower multi jet, E082073.XXXAWZZ Emotion Ø130 hand shower multi jet. XXX can be replaced by the following to denote finish: 002 - Chrome, 011 - Chrome/Black, 116 - Chrome/White, 136 - Black painted, 141 - White painted, 245 - PVD Gold, 246 - PVD Stainless Steel, 277 - Nickel brushed, 284 - PVD Copper brushed, 285 - PVD High Brass Brushed, 286 - PVD Gune Metal Brushed. ZZ is replaced with alphanumeric characters to denote packing information.

Product Images

Approval Holder:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company

Manufacturer:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company