Leak detection system, comprising of a flow sensor with a stainless-steel body incorporating a motorised spherical valve, with a stainless-steel ball. Please note that claims of leak detection have not been verified by WRAS. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

250402049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) inlet and outlet.

Marking:

HLP-4 on valve body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

9015-B.

Approval Holder:

Harrison Land & Property Ltd.

Company Name

Harrison Land & Property Ltd.

Address

11-12 Hallmark Trading Centre, Fourth Way, Wembley, Middlesex

Postcode

HA9 0LB.

Country

United Kingdom

View All Listings by this Company

Self-closing hand spray with a stainless-steel body. The inlet incorporates a flow regulator and an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5 bar. Max operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241004710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M)

Marking:

T-Safe on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

02-803200 Kitchen Spray filter

Product Images

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of circulating pumps, with plastic or stainless steel bodies (cast EN 1.4308 or plate EN 1.4301) and a plastic impeller. Maximum working pressure 10.0 bar (stainless steel bodied pumps), 3.0 bar (plastic bodied pumps). Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2012924

Size:

Composite (plastic body) (15 models): 1” BSP (M). Stainless steel body (25 models): 1½” BSP (M).

Marking:

Grundfos and Grundfos logo, type, model, production no. and other technical info on adhesive label on end of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/12/2025

Model:

Composite (plastic body): UPM2 15-** CIL2. Stainless steel body: UPMM 25-** N 180. UPML 25-** N 180. UPMXL 25-** 180 N. UPM GEO 25-** N 180. UPML GEO 25-** 180 N. UPMXL GEO 25-** 180 N. SOLAR PML 25-** 180 N. ** -stands for the lifting height of the pump in dm, that can be various 2 or 3 digit numbers

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘e-SH’ range of centrifugal booster pumps with a blue polymer coated stainless steel body, stainless steel impeller and EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110004

Size:

DN50-100 flanged inlets. DN25-80 flanged outlets.

Marking:

LOWARA (brand of Xylem), CE, maximum temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

e-SH range of pumps Example model code: ESHF 65-160/110A/P25VSNB ESH = Pump series F = Coupling type (blank - bare shaft, E - extended shaft, S - Stub shaft, F - Frame mounted or C - spacer coupling frame mounted). [ ] = motor operation (blank [ ] = standard asynchronous motor, [H] = equipped with Hydrovar, [X] = other drives). 65 = discharge port diameter mm (ranges from DN25-80). 160 = impeller diameter mm (ranges from 125-250). 110 = Motor power (2-3 digits - kW x 10 or D + actual impeller diameter (mm) (bare shaft version)). A = Trimmed impeller (blank - not trimmed, A - trimmed diameter that doesn’t maximise motor power type, X - trimmed diameter to meet customer required duty point). P = motor type (/P, /S, /W, /X). 2 = No. of poles (2 or 4). 5V = electrical voltage and frequency (5H, 5R, 5V, 5P, 5S, 5T, 5W, 6F, 6E, 6P, 6R, 6V, 6U, 6N, 6T). S = Casing material (Stainless steel 1.4404). N = Impeller material (S - Fabricated stainless steel 1.4404 or N - Cast stainless steel 1.4408). B = Mechanical seal option: Ceramic/Carbon/EPDM.

Product Images

Approval Holder:

Xylem Water Solutions UK Ltd

Company Name

Xylem Water Solutions UK Ltd

Address

Private Road 1 Colwick Industrial Estate Colwick

Postcode

NG4 2AN

Country

Nottingham

View All Listings by this Company

Manufacturer:

Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.

Company Name

Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.

Address

View All Listings by this Company

‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210907

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company