Range of meter boxes incorporating a plastic manifold arrangement consisting of a stop valve with non-rising spindle , check valve (however the complete assembly has not been tested to demonstrate it provides adequate backflow) and concentric meter port. Some models incorporate a drain off or blacking plug. Connections can be compression or push fit (see model). For use with PE8-0 pipe to BS EN 12201 and copper to EN 1057. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1525 Meter Chambers - Wall Mounted

Size:

see model

Marking:

Talis logo, Talbot, flow arrow, pressure, inlet & outlet on body.

Installation Requirements:

R001 R430

Expiry date:

31/10/2026

Model:

Drain off model: WA3261515AM – 15mm x 15mm WA3261522AM – 15mm x 22mm WA3262215AM – 22mm x 15mm WA3262222AM – 22mm x 22mm WA3262515AM – 25mm p/f x 15mm WA3262522AM – 25mm p/f x 15mm Blanking plug model: WA3271515BM – 15mm x 15mm WA3271522BM – 15mm x 22mm WA3272215BM - 22mm x 15mm WA3272222BM – 22mm x 22mm WA3272515BM – 25mm p/f x 15mm WA3272522BM – 25mm p/f x 22mm

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of hand wash and dryer units The flow is controlled by a solenoid valve activated via an infra-red sensor. The products are supplied with a non-verifiable double check valve assembly (suitable for backflow protection against Fluid category 3) for installation on the inlet. The double check valve assembly also incorporates a drain port, (located in between the cartridges), and an integral spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 50ºC.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2107098

Note:

R008 applies to the solenoid valves and stainless steel braided PEX lined flexible hose assemblies.

Size:

15mm compression

Marking:

Wallgate on face cover. Wallgate, model, serial number, date of manufacture (DD/MM/YY) and other product info on label on control panel.

Installation Requirements:

R001 R008 R040 R570

Expiry date:

31/07/2026

Model:

Thrii-SS (Solid Surface fascia), Thrii-DIS-SS (Disabled design, Solid Surface fascia), Thrii-ST (Stainless Steel fascia), Thrii-CW-SS (Cold water only, Solid Surface fascia - instantaneous water heater removed), Thrii-CW-ST (Cold water only, Stainless Steel fascia - instantaneous water heater removed), Thrii-DIS-CW-SS (Disabled design, Cold water only, Solid Surface fascia - instantaneous water heater removed), Thrii-ST-RA (Stainless Steel fascia – Rear Access), Thrii-SS-RA (Solid Surface fascia – Rear Access), Thrii-Marine.

Approval Holder:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane, Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Manufacturer:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane, Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Range of flow and temperature sensors with stainless steel bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Section:

1530 Miscellaneous Fittings

Marking:

Droople & flow arrow on body

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

SAR-FT-BSP-MM12, SAR-FT-BSP-MM34 & SAR-FT-BSP-MM1.

Approval Holder:

Droople SA

Company Name

Droople SA

Address

Route du Verney 18, 1070 Puidoux

Country

Switzerland

View All Listings by this Company

Range of pushfit hose connectors with either plastic (white or black) or chrome plated brass bodies and EPDM ‘O’-rings. SHCV prefix models incorporate screwdriver operated servicing valves. All pushfit connections are for use with PEX pipe (manufactured to BS7291-3) and copper pipe (manufactured to EN1057). Barbed end connections are not approved for use with any hose. Chrome plated brass body models are also for use with PB pipe (manufactured to BS7291-2). Maximum working pressure 10.0 bar (servicing valve models only). Barbed end connections are open outlet use only. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2107114

Note:

R008 does not apply to the black models.

Size:

See model - 15-22mm push fit inlet, 10mm & ⅜”-¾” barbed outlet.

Marking:

Twistloc logo: ‘TLC’ (brand of SNC Corporation) and size on fitting body and collet.

Installation Requirements:

R001 R008

Expiry date:

31/07/2026

Model:

SHC61M: 15mm OD x 10mm Barb (White). SHC63M: 15mm OD x 3/8” Barb (White). SHC64M: 15mm OD x 1/2” Barb (White). SHC41M: 22mm OD x 10mm Barb (White). SHC44M: 22mm OD x 1/2” Barb (White). SHC45M: 22mm OD x 3/4” Barb (White). SHC61MBK: 15mm OD x 10mm Barb (Black). SHC63MBK: 15mm OD x 3/8” Barb (Black). SHC64MBK: 15mm OD x 1/2” Barb (Black). SHC41MBK: 22mm OD x 10mm Barb (Black). SHC44MBK: 22mm OD x 1/2” Barb (Black). SHC45MBK: 22mm OD x 3/4” Barb (Black). Models with servicing valves: SHCV45M: 22mm OD x 3/4” Barb (White). SHCV44M: 22mm OD x 1/2” Barb (White). SHCV64M: 15mm OD x 1/2” Barb (White). SHCV63M: 15mm OD x 3/8” Barb (White). SHCV61M: 15mm OD x 10mm Barb (White). SHCV45MBK: 22mm OD x 3/4” Barb (Black). SHCV44MBK: 22mm OD x 1/2” Barb (Black). SHCV64MBK: 15mm OD x 1/2” Barb (Black). SHCV63MBK: 15mm OD x 3/8” Barb (Black). SHCV61MBK: 15mm OD x 10mm Barb (Black). SHCV64BM: 15mm OD x 1/2” Barb (Chrome plated brass). SHCV45BM: 22mm OD x 3/4” Barb (Chrome plated brass).

Approval Holder:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Range of pump inverters with plastic bodies, NBR rubber and EPDM rubber seals and ‘O’-rings. The products incorporate an inline resilient trim non-return valve. Maximum working pressure 13.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

1¼” BSP (M) inlet x 1½” BSP (F) outlet.

Marking:

DAB Water Technology on front casing. Manufacturer name, CE marking, date of manufacture (N.X.YYWW, where N.x = product revision index) and other technical information on adhesive label on side of casing.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Active driver plus M/T 1.0 Active driver plus M/T 2.2 Active driver plus T/T 3 Active driver plus T/T 5.5 Active driver plus M/M 1.1 Active driver plus M/M 1.8/DV Active driver plus M/M 1.5/DV Models are named “Active driver plus x/y z” or “Active driver plus x/y z/DV” Where: x indicates the configuration of the entry line, which can be monophase (“M”) or threephase (“T”), y indicates the configuration of the exit line, which can be monophase (“M”) or threephase (“T”), z indicates the maximum mechanical power of the pump’s motor and “DV” indicates dual voltage models (able to work at 115V or at 230V).

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Manufacturer:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company