Directory Search Results

Print List

#240602715

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602715
Size:
½” BSP (M)
Marking:
WRAS & Flomasta on cover, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
C10100857 C10100856

Approval Holder:
Kingfisher International Products B.V
Company Name
Kingfisher International Products B.V
Address
Rapenburgerstraat 175E, 1011 VM Amsterdam
Country
Netherlands

View All Listings by this Company

Print This Approval


#240602716

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602716
Size:
½” BSP (M)
Marking:
Flomasta & WRAS on cover, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
C10100857 C10100856

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#240704715

Sekisui F range of un-insulated GRP sectional cisterns. The larger cisterns have stainless steel internal bracing and UPVC pole supports. Insulated cisterns were added to the approval in March 2025. All cisterns are for cold water use only.

Section:
0135 Cisterns
Section Subtitle:
Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1000 Litres to 3,600,000 Litres
Marking:
Sekisui, model and product information on label.
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Sekisui F range: FS (1m high). FH, FHX (1.5m high), FW, FWX, FJX (2m high). FT, FTX (2.5m high). FZ, FZX (3m high). FK, FKX (3.5m high). FQ, FQX - (4m high).
Product Images

Approval Holder:
Sekisui Aqua Systems Co., Ltd.
Company Name
Sekisui Aqua Systems Co., Ltd.
Address
21st Floor, Tower West, Umeda Sky Building, 1-30 1-chome, Oyodonaka, Kita-ku, Osaka
Country
Japan

View All Listings by this Company
Manufacturer:
Sekisui Aqua Systems Co., Ltd.
Company Name
Sekisui Aqua Systems Co., Ltd.
Address
21st Floor, Tower West, Umeda Sky Building, 1-30 1-chome, Oyodonaka, Kita-ku, Osaka
Country
Japan

View All Listings by this Company

Print This Approval


#240704050

AXOR UNO Range of single-hole, single outlet, (fixed) over the rim bidet combination tap assemblies, (brass bodies – various finishes). Incorporating ceramic cartridge headworks with single lever or dome type operating members. The spout outlets incorporate plastic aerators. The products are supplied with lever operated pop-up waste (not verified by test). Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240704050
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
AXOR on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2029
Model:
38 211 xx0 45 200 xx0
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250104002

Ceramic cartridge headwork with a plastic body, incorporating a silicone rubber ‘O’ ring. Intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
250104002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
34.84mmOD.
Marking:
Wanhai, model number, date of manufacturer DD/MM/YYYY, WRAS, etched on body.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
35D-F.

Approval Holder:
Ningbo Wanhai Cartridge Technology Co. Ltd.
Company Name
Ningbo Wanhai Cartridge Technology Co. Ltd.
Address
Xiachen Development Zone, Chunhu, Fenghua
Country
Zhejiang, China

View All Listings by this Company
Manufacturer:
Ningbo Wanhai Cartridge Technology Co. Ltd.
Company Name
Ningbo Wanhai Cartridge Technology Co. Ltd.
Address
Xiachen Development Zone, Chunhu, Fenghua
Country
Zhejiang, China

View All Listings by this Company

Print This Approval


#2203380

Range of ceramic disc headworks incorporating brass bodies and NBR ‘O’-rings. For insertion into any specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2203380
Size:
see model
Marking:
Manufacturer's logo on body.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
CDV002 CDV002H CDV002C 17.8mm Ø.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company
Manufacturer:
Taizhou Zhonghao Machine Co Ltd.
Company Name
Taizhou Zhonghao Machine Co Ltd.
Address
PENGJIE HARDWARE INDUSTRIAL ZONE LUQIAO DISTRICT TAIZHOU CITY ZHEJIANG
Country
China
General Email

View All Listings by this Company

Print This Approval


#240702072

Range of deck mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc or a quarter turn compression washer headwork with various operating members (see model). The inlet of the quarter turn ceramic disc headwork incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn compression washer headwork with various operating members (see model) Maximum working pressure 6 Bar. Maximum operating temperature 65 °C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240702072
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Front side of faucet body: Encore logo, series identification & material batch identification number. Spray head: Encore logo & material batch identification number.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2029
Model:
Model: KW 60/66 X1 X2 X3 X4 X5 X6 S3 (Y A X7) K = Encore Series W = WRAS series 60 = Deck mount faucet body 8” inlet centres 66 = Deck mount faucet body 6” inlet centres X1 1 = Spring pre-rinse 5 = Swivel arm Pre-rinse 12” arm length X2 0 = Compression 1 = Ceramic X3 1 = W/Swivel arm P/R support 6 = Spring chrome plated 7 = Spring stainless steel X4 1 = 18” Riser (only on spring type pre-rinse) 4 = 32” Riser (only on swivel type pre-rinse) X5 1 = Yes X6 1 = Standard lever 2 = Cross 4 = Designer handle 5 = 4” Wrist Blade 6 = 6” Wrist blade S3 = Standard spray valve Optional: Where Y denotes the add-on spout. A = Add-On Faucet W/6” Spout B = Add-On Faucet W/8” Spout C = Add-On Faucet W/10” Spout D = Add-On Faucet W/12” Spout A= 0.5 GPM max aerated stream vandal resistant X7 1 = Standard lever 2 = Cross 4 = Designer handle
Product Images

Approval Holder:
CHG Europe B.V.
Company Name
CHG Europe B.V.
Postcode
THE NETHERLANDS

View All Listings by this Company

Print This Approval


#240202031

Single hole, single outlet (swivel) pull down spray combination tap assembly (brass body, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240202031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
M10x1 (F)
Marking:
Taizhou Shenglang Sanitary Ware Co., Ltd. logo on body.
Installation Requirements:
R001 R006 R010
Expiry date:
28/02/2029
Model:
SL-KT060
Product Images

Approval Holder:
Taizhou Shenglang Sanitary Ware Co., Ltd.
Company Name
Taizhou Shenglang Sanitary Ware Co., Ltd.
Address
Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Taizhou Shenglang Sanitary Ware Co., Ltd.
Company Name
Taizhou Shenglang Sanitary Ware Co., Ltd.
Address
Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#241103001

Single-hole, single outlet, fixed, combination tap assemblies (chrome plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type pop-up waste (verified by test). Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241103001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm copper tails
Marking:
Bristan on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2029
Model:
J SMBAS C.

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#241203001

Single hole, single outlet fixed combination tap assemblies (chrome plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a stainless steel filter. The product is supplied with a click type pop-up waste (verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241203001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Bristan on body.
Installation Requirements:
R001 R006 R010 R160
Expiry date:
31/12/2029
Model:
BQINV BAS C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 900 of 1110

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.